• Korean journal of food and cookery science
• /
• v.20 no.6 s.84
• /
• pp.684-694
• /
• 2004

The purpose of this study was to estimate the microbial and physicochemical quality of some raw vegetables and suggest safer methods of sanitization and storage for foodservice operations. Three sanitization methods were utilized during pre-preparation (tap water, chlorine water and electrolyzed water). Leek and Chicory were monitored as ingredient, with different storage temperatures $(3,\;10^{\circ}C)$ and periods (1, 2, 3, 4 and 7 days). The largest reduction in the microbial counts was shown with the electrolyzed water and for the case before immersion in chlorine water, performing a first washing was more effective in reducing the microbial counts than with no washing. The results showed that the storage temperature, pH, moisture content and microbial loads were important factors affecting the quality of vegetables.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.910
• /
• pp.1312-1319
• /
• 2004

Underwear is laundered frequently and most of them is made of cotton, but a cotton fiber is more difficult to modify than a synthetic fiber. We have attempted to determine the optimum conditions necessary whereby the lowest concentration of silver solution is needed to produce the greatest antimicrobial properties of cotton fabrics. For this study, colloidal silver was made by electrolysis. The concentration of colloidal silver was increased by increasing the area of the silver plates submerged in the water, the water temperature, the water hardness and the flow time of the water per 1l. However, the colloidal silver concentration was decreased by extending a space between the silver plates and increasing the water velocity. Cotton fabrics treated in the washing machine with 1.3 ppm colloidal silver solution for 10 minutes had effective microbial properties and an unperceivable reduction of reflectance.

• Environmental Analysis Health and Toxicology
• /
• v.7 no.1_2
• /
• pp.67-87
• /
• 1992

Each detergent-solution in the concentration of 0.4% was prepared with four kinds of raw materials of detergents and two kinds of commercial surfactants for kitchen. LAS (Linear Alkyl Benzene Sulfonate), AOS ($\alpha$-O1effine Sulfonate), SLS (Sodium Lauryl Sulfonate) and SLE (Sodium Lauryl Ester Sulfonate) were used as the raw materials. Vegetables and fruits such as cucumber, crown daisy, lettuce, strawberry and tomatos were diped in each solution and washed 5 times in static or flow state. For the other experiments, tablewares such as porcelain, stainless bowls, glass and plastic cups were diped in each solution and washed also 5 times with cold and hot water in static or flow state. The residues of the detergents on the every steps of wash-conditions were measured. The results of this study were summarized as followings: 1. The residures of the detergents on the tested vegetables and fruits after 5 times washing were detected with the range from 0.450 to 7.120 ppm in static state and from 0.343 to 6.375 ppm in flow state. 2. The residures of the detergents on the tested tablewares after 5 times washing with cold water were observed with the range from 0.057 to 0.815 ppm in static state and from 0.066 to 0.905 ppm in flow state. 4. The residures of the detergents on the tested tablewares after 5 times washing with hot water were determined with the range from 0.061 to 0.424 ppm in static state and from 0.066 to 0.368 ppm in flow state. 4. Independent on detergent types, water temperatures and washing methods, the detergents were remained stablely on the porcelain; 0.057~0.815 ppm, on the stainless bowl; 0.061~0.905 ppm, on the glass cup; 0.0l4~0.592 ppm and on the plastic cup; 0.201~0.592 ppm.

• The International Journal of Costume Culture
• /
• v.9 no.2
• /
• pp.133-148
• /
• 2006

This research endeavors to provide correct handling methods of jeans through a study on care labels for wearing and handling behaviors of female university students in their twenties. The conclusion of the research is as follows: The study indicates that coeds own more than seven jeans and wear them three or four times a week on the average. The research showed that washing jeans once weekly is the highest. It showed that the jeans are mainly laundered with water and also with water and dry cleaning together. The students responded that they dry cleaned the pants several times and then water wash them after buying the pants in order to prevent change in colors and shapes of the pants. Content of labels should be improved because most female students indicated the importance of the care labels. The reliability and understanding of the labels were surveyed to be lacking. The survey indicated that the percentage of checking the sizes was the highest when the students bought the jeans. Furthermore, the label "handle with care" turned out to be examined more frequently than the indication, "textile materials breakdown" when they took care of the clothes including laundering or ironing. Moreover, the students experienced extensive color change after water washing and other accidents when taking care of their clothes. Their attitudes were surveyed to be very passive on handling the problems after washing or handling jeans. Therefore, the study concluded that the labeling methods should be improved especially in regard to the validity verification of the label contents and also the manufacturers should make concerted efforts to improve and enhance the consumer's rights and interests for effectiveness and accuracy of the descriptive labels.

• Asian Journal of Atmospheric Environment
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2013

To establish the method for investigating the behavior of aerosol particles deposited on the leaf surface against fog water under natural conditions, scanning electron microscopy with energy-dispersive X-ray (SEM-EDX) analysis and wash water analysis by ion chromatography after the washing treatment were performed using leaves of white birch collected from low part of the tree crown and the top of the tree in Sapporo City, Hokkaido, northern Japan. Each of collected leaves was divided into two parts according to the treatment performed: leaf surface (adaxial side) was 1) untreated, and 2) washed with deionized water with a pipette. In untreated samples, many particles of various shapes, including soil particles and organic debris, were deposited on the surface. Particles containing S were found on the surface of samples collected from only low part of the tree crown. After the washing treatment, SEM-EDX analysis revealed that soil particles and particles containing S had been washed off with water, although some particles such as soil particles and organic debris still remained on the leaf surface. The major anion such as $SO{_4}^{2-}$ was detected in wash water of all samples, although the peak of S in X-ray spectra was not detected from samples collected at top of the tree. The combination of SEM-EDX analysis with wash water analysis indicated that $SO{_4}^{2-}$ was deposited on the leaf surface in dissolved state and/or in state of submicron particles. These results suggested that fog water could remove soil particles and particles containing S and $SO{_4}^{2-}$ from the leaf surfaces, but not all particles. There was no difference in sampling position in the tree crown. Our study suggested that combination with SEM-EDX analysis and wash water analysis would be effective for investigation of the behavior of particles on the leaf surface against fog water.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.3-9
• /
• 2009

When washing machine is rotated in the laundry, it tends to lean toward one side. This tendency causes a serious vibration. The balance of washing machine plays an important role in order to reduce the vibration by injecting the sand or the salt water into the balance of washing machine. The hot plate welder is used to prevent from outflow of contents. The hot plate welder brings about many problems which is concerned with accidents. The direction recognition and location information of the balance are required in this system. In this paper, the recognition direction of balance in washing machine using machine vision system is studied. The template matching algorithm compares sub-image with original image acquired in real-time to obtain a center point of balance image. The mid points and the edges of balance are estimated by the edge detection and gauging algorithms. The data acquired by these results is used for recognition direction of balance. The automation software for image processing is developed by using LabVIEW.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.31-37
• /
• 2011

The feasibility study of soil flushing was investigated to remediate lubricant oil and zinc contaminated railway soil. In this study, mixed washing agents of surfactant and inorganic acid/base were used for the simultaneous removal. The mixed washing agent of non-ionic surfactant and HCl removed 15% of the lubricant oil and 40% of zinc, respectively. Alkaline-enhanced soil washing process increased the removal of lubricant oil up to 40%. This is because alkaline solution reduced the interfacial tension between water phase and lubricant oil phase due to the soap formation reaction. To simulate in-situ soil flushing for the remediation of railroad-related contamination, two dimensional soil flushing was carried out based on the results of batch soil washing. In the soil flushing, the removal efficiencies of lubricant oil and zinc were 34% and 16%, respectively. Even though the removal efficiency was low, the mixed washing agent can remove metal and lubricant oil simultaneously.

• Fashion & Textile Research Journal
• /
• v.20 no.1
• /
• pp.93-100
• /
• 2018

This study comparatively analyzed the changes in the dimensional stability and the mechanical properties of stretch knit fabrics associated with washings conditions in order to determine the most appropriate washing method. Polyester and spandex knit fabrics were washed 25 cycles with nine washing condition profiles that controled detergent, hardness. temperature and RPM. The knit fabrics with repeated washings were evaluated by dimensional stability and measured by the KES-FB system. Polyester and spandex fibers have good chemical resistance. However, the changes in the dimensional stability and the mechanical properties were observed in washed knit fabrics. After repeated washings, the knit fabrics washed in an alkali or neutral detergent had good dimensional stability compared with the knit fabric washed in functional detergent. The washed knit fabrics were extended, stiff, rough, and had a smaller volume. The changes were the result of the rearrange of polyester fibers which twisted around spandex core and chemical interactions involving the detergent and the physical and mechanical forces of washing. Especially, using an alkali detergent resulted in increased stiffness and roughness of the knit fabric. In conclusion, the washing in water with low hardness and a neutral detergent can minimize the changes in dimensional stability and mechanical properties of polyester and spandex knit fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.716-724
• /
• 1998

The purpose of this study is to investigate the washing methods specified on care labels of blue jeans and to examine the appropriateness of the specification. In the study, the present condition of care labels on 100% cotton blue jeans was investigated and the consumers' washing methods of blue jeans were surveyed. Also, the shrinkage of blue jeans after washing was measured. The major results were as follows: 1. In spite of the fact that same materials of 100% cotton denim were used in all cases, washing signs on care labels showed very differently and the symbols of hand wash, using light duty detergent, no wring, drying in shade, and warm ironing with a covering cloth were demanding too high level of care for the protection of blue jeans. 2. Almost all consumers didn't follow instructions proposed on care labels because they didn't anticipate problem. In reality, most consumers washed blue jeans by machine in cold water with heavy duty detergent at standard course, dried under the sun, and didn't iron. The 40.8% of consumers didn't have problems even if they didn't follow instructions. Most problems happened after washing were shrinkage in length, but in shrinkage test after 15 times washings, it was found that there was no serious shrinkage problem. 3. For ideal care of blue jean, it is necessary for manufacturers to recognize the importance of care label and to stick correct appropriate care label. Also, consumers have to trust and follow instructions on care label.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.71-81
• /
• 2011

Cause of contamination in the study area nearby Jang Hang Refinery is dust scattering in refinery stack, and soil washing treatment is one of the proper technologies for soil remediation in this area. Site conditions frequently limit the selection of a treatment process. A treatment technology may be eliminated based on the soil classification or physicochemical characteristics of soil. This study was assessed the soil washing efficiency by conducting of soil characteristic analysis in the vicinity of Jang Hang Refinery Stack within a 2 km radius. Also, it was decided about remedial range with comparative analysis of As in soil by Korean Standard Test Method before/after revision, whereupon As concentration in soil showed a increasing tendency after revision. As a result, the soil washing using the size separation of soil was determined through identifying of As species in the soil. In this site, only particle size distribution and water content of soil can provide the initial means of screening for the potential use of soil washing.