• Journal of Life Science
• /
• v.12 no.6
• /
• pp.694-699
• /
• 2002

The present experiment was carried out to determine the effect of seed-coat softening by various chemicals, washing, chilling, and light treatment alone and in combination during desiccation of seeds on germination of gourd (Lagenaria siceraria Standl.) seeds. Potassium hydroxide, sodium hydroxide, acetone, acetonitrile, and acetamide were used as chemicals for the softening. Washing, prechilling, drying and light treatment of the softened seeds were done for a hour with tap water, for one or three weeks at 3$^{\circ}C$, 12 hr at 35$^{\circ}C$, and 14 hr a day at 3$0^{\circ}C$ with red light illumination or darkness, respectively. FR-yongjadaemok and FR-kunghap were used as test cultivars. Seed-coat softening with 10% acetone and acetonitrile for 1 hour enhanced and accelerated seed germination compared to the other chemicals and water imbibition. KOH treated for the softening was necessary to increase the germination rate of seeds for following chilling, but acetone did not influence their germinability regardless of chilling. Washing the softened seeds in tap water increased the germination rate in comparison with no-washing. During desiccation of the seeds sequentially treated with the softening, washing and chilling, red light treatment showed higher germination rate than dark one, suggesting that red light treatment are necessary during desiccation.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.28-39
• /
• 2011

This review investigated theoretical principals and practical application examples on recirculation system of soil washing-wastewater treatment-treated water recycling. As for technologies which have attempted to remediating metals-contaminated soil in and around country, there are reactive barriers, encapsulation, solidification/stabilization, soil washing, and phytoremediation. Among those, in particular, this review covers soil washing technology which physicochemically removes contaminants from soils. The major drawbacks of this technology are to generate a large amount of wastewater which contains contaminants complexed with ligands of washing solution and needs additional treatment process. To solve these problems, many chemical treatment methods have been developed as follows: precipitation/coprecipitation, membrane filtration, adsorption treatment, ion exchange, and electrokinetic treatment. In the last part of the review, recent research and field application cases on soil washing wastewater treatment and recycling were introduced. Based on these integrated technologies, it could be achieved to solve the problem of soil washing wastewater and to enhance cost effective process by reducing total water resources use in soil washing process.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.61-67
• /
• 2009

A non-discharged system of sequentially physico-chemical water treatment was used to treat the contaminated water produced from washing system of soils according to full-scale soil washing. After washing the TPH contaminated soils, the remaining concentrations of COD$_{Mn}$, SS, and n-hexane were analyzed for each compartment to estimate the treatment efficiencies of non-discharged system. Three times of sampling events were conducted for 4 different compartments (sediment tank, flocculation tank, oil/water separator, and process-water tank). In addition, soil washing efficiencies and concentrations of each parameter (COD$_{Mn}$, SS, and n-hexane) for process-water tank were analyzed for about 8 months. As results, the average efficiency of soil washing was high to have 95.9%, regardless of the condition of TPH contamination level for soils, as well as the concentrations of COD$_{Mn}$, SS, and n-hexane in the process-water tank were below the regulation limits of the Water Environmental Conserveation Act. Accordingly, the full-scale washing treatment system in this study could make the washing water 100% recycled which lead the system to be environmentally-friendly and economical.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.53-60
• /
• 2006

Paper materials for long term conservation suffer slowly mechanical and chemical deterioration, the extent of which may depend upon their conservation environment. Those deterioration includes discoloring, low moisture content, acidification, and brittleness. To slow deterioration, washing treatment, deacidification, and polymer reinforcement on paper materials are usually used. One easy and simple method of fixing low moisture content and acidification was an washing method, and we used both distilled and alkali water in washing method in this study. Alkali water is electrolyzed cathode water of high pH, and has no alkali metal ions in it. Experiment showed that washing treatment with both distilled and alkali water gave improvement in raising moisture content, pH, and mechanical strength of paper materials even after severe accelerated aging test. Advantageous effect of alkali water over distilled water on preventing deterioation was also shown clearly.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.71-81
• /
• 2011

Cause of contamination in the study area nearby Jang Hang Refinery is dust scattering in refinery stack, and soil washing treatment is one of the proper technologies for soil remediation in this area. Site conditions frequently limit the selection of a treatment process. A treatment technology may be eliminated based on the soil classification or physicochemical characteristics of soil. This study was assessed the soil washing efficiency by conducting of soil characteristic analysis in the vicinity of Jang Hang Refinery Stack within a 2 km radius. Also, it was decided about remedial range with comparative analysis of As in soil by Korean Standard Test Method before/after revision, whereupon As concentration in soil showed a increasing tendency after revision. As a result, the soil washing using the size separation of soil was determined through identifying of As species in the soil. In this site, only particle size distribution and water content of soil can provide the initial means of screening for the potential use of soil washing.

• Journal of the Korean Society of Costume
• /
• v.55 no.5 s.95
• /
• pp.101-107
• /
• 2005

In this article, mordant absorption rate by the Change of temperature and fabric, discharge level by water washing, mordant density and method in mordant dye are going to be handled. Besides, how treatment method will have an effect on absorption rate and color, is also going to be covered. An atom extinction photometer was used to measure the amount of mordant absorbed in fabric at each temperature and mordant type. It turned out that absorption rate differs according to the type of mordant and sample or temperature. Also it turned out that the mordant input amount has little influence on absorption rate, that is to say, if though you use more mordants, just tiny amount of mordant is going to be absorbed in cloth. It is true that the higher temperature goes up, the better mordant absorption gets. It is found that the type of mordant and sample, treatment period affects the discharge rate. Normally $15{\~}98\%$ mordant comes off the fabric by water washing, to be specific, $17{\~}47\%$ Iron by water washing and it has better performance on cotton and nylon than silk, $1\%{\~}52\%$ Aluminum by water washing and better absorption on silk, $36{\~}89\%$ Chrome by water washing and better absorption on silk, $50{\~}89\%$ copper by water washing and better absorption on silk, poor on cotton. The examination of the K/S values and colors between before and after soaping has been conducted under the circumstance that the test fabrics had been treated at $80^{\circ}C$ for 30 minutes with $0.2\%$ soaping solution. In case of pre-mordanted fabrics, the K/S value nosedived after soaping, meanwhile densely mordanted fabric's K/S value soared but after soaping, it dropped sharply. It turned out that soaping treatment deteriorates absorption much more than water washing. It's considered that $0.1 \%$ (W/V) of mordant density is appropriate.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.296-300
• /
• 2001

In order to recycle the incineration ash (bottom ash and fly ash) generated from the incineration of municipal waste for a cement material, salts as well as heavy metal should be removed by the stabilization treatment. Most of these heavy metal and over 80% of salts are removed by a washing as a pre-treatment. However, wastewater which is another pollutant is generated by a washing, then proper treatment should be developed. First the characteristics of incineration ashes collected from two domestic full-sized incinerators were investigated and removal rate of salts and heavy metals from them also studied. The wastewater quality was compared to the criteria of the regulation by analyzing the characteristics of generated wastewater during the washing of incineration ash as a condition of liquid/solid ratio. Also, we tried to used this experimental results for the basic data to develop proper processing technique of municipal waste.

• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.180-187
• /
• 2001

Generally, polyester microfiber has much greater dye uptake than that of regular ones. In spite of high dye up-take visual shade depth of dyed fabric decreases with smaller denier, which results in poor washing fastness of dyed fabric. In this study, in order to investigate the washing fastness, polyester microfiber fabric was dyed by using two type of disperse dyes and treated with 3 different reduction clearing methods. The reduction clearing methods in this study are normal alkaline reduction clearing, $N_2$ gas replacement method, and ultrasonic treatment during reduction clearing. The results were as followings ; The most important factors affecting the washing fastness of polyester artificial suede fabric were found to be the reduction clearing method, the chemical structure of used disperse dyes and the structure and denier of fibers. It was also obtained that the heat treatment of dyed fabric decreased the washing fastness due to the dye migration from inner phase to surface.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.23-31
• /
• 1999

In order to investigate the detergency of the mixture of compact detergent and bleaching agent to fabric stained with a coffee and a red wine, respectively, and a japanese wet stained fabrics, to evaluation of detergency was studied under various washing conditions. In order to study the effect of alkaline agent addition on the detergency, the soda ash was added in the compact detergent system. The results are as follows : In a low temperature washing condition, the alkalinity of washing liquor effected more the removal of the composite stained fabrics than that of oilic stained fabrics. For the colored stained fabric such as red wine stained sample, the influence of the repeated washing treatment on the detergency was not significant factor. On the other hand, the influence of the repeated washing treatment for the coffee stained and japanese wet stained fabric on the detergency was gradually increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.3
• /
• pp.53-61
• /
• 1985

This paper has been studied on the method of washing without any damage on wool, namely foam washing method. Effect of washing was obtained with experimental equipment manufactured by way of trial. but some deflects were found that the volume of detergent solution and blow ratio changed with time passes by. This difficulties should be improved by farther studies. The solution mixed with sodium oleate ($0.5\%$) and sodium carbonate ($0.3\%$) was found suitable for detergent solution, and under the conditions of washing temperature at $50\~60^{\circ}C$ and washing time for 5 minutes, the washing effect was obtained good. Desoaping treatment with $Na_2CO_3$ solution after washing might be thought to be necessary, and from the scanning electron micrographs (SEM), no damage on wool and wool sureface washed was, observed. From the results of this study foam washing of wool may be expected to be very effective.