• 한국의류학회지
• /
• 제10권2호
• /
• pp.1-9
• /
• 1986

To study the effects of surface structure of fiber on the decrement of fatty soil removal at high temperature, the following variables were selected: controled and alkali-treated P.E.T.(polyester) fabrics and chopped fibers as substrates to estimate the detergencies, different aging methods of soiled substrates, and different washing temperatures and surfactant solutions. Radiotagged tripalmitin was used as soil and the detergency was estimated by means of liquid scintillation counting method. The results were as following: The surface of the fiber became rough with many grooves and the hydrophilicity of the fiber was increased and the structure of the fabric became loose by alkali treatment. While the detergency of alkali-treated P.E.T. fabric was better than that of controled P. E. T. fabric, there was no significant differences between the detergencies of controled and alkali-treated chopped fibers. These results indicate that the increment of detergency of alkali-treated P.E.T. fabric is mainly resulted from the changes of fabric structure and the improved hydrophilicity of fiber by alkai treatment. The detergency of tripalmitin was increased with elevating temp. below the m.p. of tripalmitin, was decreased around the m.p., and again was increased above the m.p ..It is considered that the decrement of detergency around the m.p. is due to the diffusion of molten tripalmitin into the grooves on fiber surface, the inner part of fiber, and between fibers. When controled and alkali-treated soiled fabrics and soiled chopped fibers were washed in the distilled water and in the Na-DBS solution respectively, below $60^{\circ}C$ detergencies of alkali-treated fabrics and chopped fibers were improved. However above $60^{\circ}C$ this result was reversed. Therefore these results are regarded as the effects of grooves on fiber surface at high temp. and improved hydrophilicity at low temp. by alkali treatment. When controled and alkali-treated soiled fabrics and soiled chopped fibers were hot-aged before washing, the detergencies of both species were decreased generally. Because the soil was diffused into the grooves on fiber surface, the inner part of fiber, and between fibers during hot-aging. The detergencies of hot-aged species were also decreased above certain temp.. These results suggest that the decrement of detergency at high temp. be resulted not only from the diffusion of soil into the grooves on fiber surface, the inner part of fiber, and between fibers, but also from the characteristics of surfactant solutions.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.513-520
• /
• 2016

Many surface protection methods have been developed to apply to constructional steels which have been used under severe corrosive environments. One of these methods, hot dip galvanizing is being widely used to the numerous constructional steels such as a guard rail of high way, various types of structural steel for manufacturing ship and for some other industrial fields etc.. Recently, the cost of zinc is getting higher and higher, thus, it is considered that improvement of hot dip galvanizing process to reduce the cost of production should be developed possibly. In this study, additives such as acid cleaning solution, $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ were added to flux solution, and omission of water washing treatment after acid cleaning was investigated with some types of flux solutions added with some additives mentioned above. The decrement of pH by adding the acid cleaning solution could be controlled due to neutralization reaction with addition of $NH_4OH$. The flux solution added with both $NH_4OH$ and $Al(OH)_3$ exhibited nearly the same color and pH value as those of orignal flux solution with no added, and the sample dipped to the flux solution which was added with additives mentioned above indicated a relatively good corrosion resistance compared to other samples. However, the flux solution added with $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ exhibited a different color, sediment and a bad corrosion resistance. Consequently, it is considered that omission of water washing treatment may be able to perform by adding optimum additives to the original flux solution.

• 한국응급구조학회지
• /
• 제12권3호
• /
• pp.99-113
• /
• 2008

In order to protect Rescue 119 workers exposed on the spot from potential infection, this study identified their awareness and practices of infection control so that it could help preventing them from infection and also provide basic materials necessary for pre-hospital infection control. This study applied questionnaire survey to total 215 Rescue 119 workers at fire stations in Jeonbuk province, Jeonnam province and Gwangju city from July 14 to Sept. 14, 2006 for the benefit of data collection. The questionnaire about possible associations between awareness and practices of infection control consisted of total 46 times across 6 categories such as washing hands during emergency activities ; fluid therapy and injection ; respirator maintenance; individual hygienics ; disinfectant supplies and equipments maintenance ; and control of infectious wastes. And collected data were processed using SPSS statistic program to analyze frequency and percentage, mean and standard deviation, Pearson's correlation coefficient, t-test and one-way ANOVA. As a result, this study came to the following conclusions : In terms of awareness about infection control, our respondents showed highest awareness about infectious waste control, and also showed highest level of practices in washing hands during emergency activities. Throughout all domains, awareness means were higher than practice means. In particular, infectious waste control was the domain of significant differences between awareness and practices. In terms of associations between awareness and individual characteristics, it was found that female rescue worker group and hospital/general hospital career group (before joining the Rescue 119) showed significantly higher awareness on statistic level. In regard to associations between individual characteristics and practices, it was found that female rescue worker group showed higher level of practices than male group on statistic level. This study also analyzed correlations between rescue workers' awareness and practice of infection control. As a result, it was found that the higher awareness was in correlations with the higher practices across all 6 domains including washing hands. In addition, the higher awareness of a questionnaire item was in significantly positive correlations with the higher practice of other items. However, our respondents showed high awareness about anti-infection, but low practices in reality. This indicates necessity of devising possible solutions to improve the practices as much as awareness. Especially, it was noted that major reasons for insufficient practices of infection control guideline come from unhabituated practices and lack of supports for infection-preventing supplies and protective device (mask, etc). Hence, it is necessary to provide more infection-preventing supplies for local rescue workers sufficiently, in parallel with steady habituation of infection control. Furthermore, it is required to manage and study infection control policies even at pre-hospital step in efforts for effective infection control, education and activities.

• 한국가정과학회지
• /
• 제9권1호
• /
• pp.43-50
• /
• 2006

The main colorant of Chelidonium majus extracts is a berberine which shows relatively good dyeability onto silk fabrics in the appropriate dyeing conditions without mordant, But cotton fabrics are difficult to dye with berberine because of the low substantivity the cationic to cellulosic fibers. we treated cotton fabrics using three types of polycarboxylic acid, DL-malic acid, citric acid, 1,2,3,4-butanetetracarboxylic acid(BTCA) to increase dyeability of Chelidonium majus extracts onto cotton fabrics. As a result the cotton fabrics treated with polycarboxylic acid could be dyed with Chelidonium majus extracts and also showed yellow vividly. The dye uptake were increased with increasing the number of carboxy groups. And so dye uptake resulted the largest in the BTCA solutions which have four carboxylic groups in the molecular unit. The optimal dyeing temperature a of Chelidonium majus extracts onto polycarboxylic acid treated cotton fabrics were $60^{\circ}C$. The dye equilibrium was reached 20 minutes after dyeing. Neutral pH of dye solutions showed in higher K/S value than acidic or alkaline conditions. But the colorfastness to washing and light according to polycarboxylic acid treat was not enhance.

• 복식
• /
• 제14권
• /
• pp.133-144
• /
• 1990

The purpose of this study is to investigate the absorbance of the Shikonin, one of the major purple pigments, and the stability against the effect of light, $O_2$, and temperature. The effect of mordant and mordanting condition to color and color-fastness is compared and analysed through the color-fastness-test, color-difference value-test, and IR-test. The results were as follows; 1. The absorbance of Shikonin was examinated through 6 kinds of solutions and distilled water. Shikonin was absorbed by solutions rather easily than distilled water. 2. The light effect to Shikonin indicated that the solution with the light was more stable than that without it. 3. The effect of $O_2$ to Shikonin showed that the solution with the $O_2$ was more stable that without it $O_2$. 4. Shikonin -methyl alcohol solution was stable in $25^{\circ}C$. It was unstable in $60^{\circ}C$ and $100^{\circ}C$ with lowered absorbance and changed colors. 5. Color-fastness test to silk and cotton indicated washing color-fastness and perspiration color-fastness was more than 3 grade. But the light color-fastness and crocking color-fastness was low. 6. The comparison between non -colored sample and colored-sample showed the latter was better in fastness. 7. Mordant as $Alk(SO_4)_2{\cdot}24H_2O$ and $AlCl_3{\cdot}6H_2O$ was better than anything else in fastness. 8. Color-difference value-test indicated that the mordant which had the jade green color, the original purple pigment color, was the best in use. 9. The best way to extract the original purple pigment color was in $25^{\circ}C$, because extracted dyeing solution by Soxhlet had the bluish color.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.659-662
• /
• 2007

In order to determine the optimal storage conditions of Capsosiphon fulvescens (maesaengi), 2 types of wash solutions (distilled water and seawater) and storage temperatures (-20 and $-80^{\circ}C$) were evaluated for the effectiveness of microbial growth inhibition and the changes of texture, color, and proximate composition. Thawed samples that had been washed with seawater and stored at $-20^{\circ}C$ for 50 days showed a 1.1-fold increase in hardness compared to the initial hardness of the sample ($1.9{\times}10^5\;dyne/cm^2$). There was no change in moisture, ash, or crude lipid during storage at -20 and $-80^{\circ}C$ for 60 days, while there was a $1{\pm}0.2%$ decrease in crude protein content for the control during storage at both -20 and $-80^{\circ}C$ for 60 days. In conclusion, the recommended optimal storage conditions for retaining the quality of C. fulvescens are: temperatures at or below $-20^{\circ}C$ and washings with either distilled water or seawater for inhibiting microbial growth, temperatures at or below $-20^{\circ}C$ and a washing with seawater to prevent reductions in hardness, and a temperature of $-80^{\circ}C$ and washings with either distilled water or seawater to protect against color changes.

• 자원리싸이클링
• /
• 제16권6호
• /
• pp.39-45
• /
• 2007

황동 전구 base 제조과정에서 발생하는 황산폐수에 함유된 구리와 아연의 농도를 저감시키기 위해 중화법에 의한 최적조건을 조사하였다. 구리와 아연이 함유된 황산용액에 대해 화학반응과 물질수지를 고려하여 용액의 pH에 따른 구리와 아연의 농도분포와 용해도를 구하였다. 구리와 아연의 수산화물이 침전되는 pH영역에서 아연의 용해도가 구리의 용해도보다 크므로, 구리에 비해 아연의 제거율이 용액의 pH에 민감하였다. 응집제로 $Al_2(SO_4)_3$를 첨가하는 경우 아연의 제거율은 응집제의 첨가형태에 영향을 받지 않았으나, 구리의 경우에는 용액으로 첨가하는 것이 고체상태로 첨가하는 것보다 제거율이 높았다.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2167-2170
• /
• 2013

A low-cost and simple recycling process of waste thermoelectric modules has been investigated using chemical reduction methods. The recycling is separated by two processes, such as dissolving and reduction. When the waste thermoelectric chips are immersed into a high concentration of $HNO_3$ aqueous solution at $100^{\circ}C$, oxide powders, e.g., $TeO_2$ and $Sb_2O_3$, are precipitated in the $Bi^{3+}$ and $HTeO{_2}^+$ ions contained solution. By employing a reduction process with the ions contained solutions, $Bi_2Te_3$ nanoparticles are successfully synthesized. Due to high reduction potential of $HTeO{_2}^+$ to Te, Te elements are initially formed and subsequently $Bi_2Te_3$ nanoparticles are formed. The average particle size of $Bi_2Te_3$ was calculated to be 25 nm with homogeneous size distribution. On the other hand, when the precipitated powders reduced by hydrazine, $Sb_2O_3$ and Te nanoparticles are synthesized because of higher reduction potentials of $TeO_2$ to Te. After the washing step, the $Sb_2O_3$ are clearly removed, results in Te nanoparticles.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.517-525
• /
• 2011

In this study, the used DOCs, which could remove the air pollutants such as CO and HC in the exhaust gas from diesel vehicle, were remanufactured by various conditions. Their catalytic performances and characterization were also investigated. The remanufacturing process of the deactivated DOCs includes high temperature cleaning of incineration, ultrasonic cleaning for washing with acid/base solutions to remove deactivating materials deposited to the surface of the catalysts, and active component reimpregnation for reactivating catalytic activity of them. The catalytic performance tests of the remanufactured DOCs were carried out by the diesel engine dynamo systems and chassi dynamo systems in CVS-75 mode. All prepared catalysts were characterized by the optical microscopes, SEM, EDX, porosimeter and BET to investigate correlations between catalytic reactivity and surface characteristics of them. The remanufactured DOCs at various conditions showed the improved catalytic performances reaching to 90% of fresh DOC, which is attributed to remove the deactivating materials from the surface of the used DOC through the analysis of catalytic performance test and their characterization.

• 한국염색가공학회지
• /
• 제11권1호
• /
• pp.34-41
• /
• 1999

To examine the increase of paper strength by solvent-bonding using N-methylmorpholine N-oxide (NMMO), a paper was treated with aqueous solutions of NMMO, concentrated at $90^\circ{C}$ for selected periods of time, and pressed for 5 seconds followed by washing and drying. The effect of the increasing NMMO concentration on bonding state and some important properties of samples were mainly investigated. With increasing concentration of NMMO, the degree of bonding between fibers was increased, the fiber cross-sectional shape was changed from 'thin ribbonlike' to 'round rodlike' by swelling with solvent, and the longitudinal waves (crimp) were introduced to fibers, hence the shrinkage, weight per unit area, and thickness of paper were increased. Consequently, the tensile strength and elongation, under standard and wet conditions, and the stiffness were increased, and the water absorption was decreased generally with increasing concentration of NMMO. The moisture regain of treated samples was lower than that of the untreated sample, because of the reduction of space between fibers. But the moisture regain was increased a little with increasing concentration of NMMO due to the fiber swelling with NMMO followed by structural relaxation.