• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.8-14
• /
• 2006

The pigment extraction of Opuntia ficus-indica has been conducted to develop useful natural dyes in place of synthetic dyes which are suspected to bring serious environmental pollutions. The dyeing ability on wool fabric by addition of ascorbic acid and several mordants were investigated by means of color measurement. In addition, the fastness of washing, perspiration, rubbing, light, dry cleaning, effect on bacterial reduction and UV-B protection were also investigated. From these investigation, it is suggested that the pigment extracted from Opuntia ficus-indica can be used as a source of natural dyes and the obtained result are as follows. 1. Maximum absorption band (${\lambda}max$) of Opuntia ficus-indica extract is 533nm. 2. The wool fabric dyed with Opuntia ficus-indica extract has stable color by the addition of ascorbic acid and is achieved with addition of 0.1% ascorbic acid, 0.5% several mordant, and three repeated dying at $50^{\circ}C$ for 1.5hr. 3. The wash fastness of the dyed wool fabric when it is washed with neutral detergent is more effective than alkaline detergent. The dry cleaning fastness of the dyed wool fabric is more excellent. In addition, the perspiration fastness of the dyed wool fabric is increased by mordanting method. And than the rubbing fastness of the dyed wool fabric is showed excellent under dryness and wetness. Light fastness of the dyed wool fabric, however is showed inferiority. 4. The wool fabric dyed with Opuntia ficus-indica extract is showed effective bacterial reduction and UV-B protection is increased remarkably.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.171-179
• /
• 2017

This study was to investigate the practicality and functionality of water lily(Nymphaea tetragona) leaves as a natural dye resource while searching for various dyeing methods to utilize them. Effect of dyeing condition including methanol ratio of dyebath, dyeing temperature and time, mordanting method, etc were investigated. Colorants were prepared by extraction in methanol and followed drying process. When composing 30% of methanol in the dyebath, better dyeuptake and uniform dyeing were resulted. Pre-mordanting method gave better results in terms of dye uptake than post-mordanting method on the wool fabrics. Fe and Ti were effective for increasing the dye uptake on the silk fabrics. Depending on mordant type and mordanting method, the dyed fabrics got various color showing green, khaki, brownish yellow, dark brown, dark gray and so on. As for color fastness, the silk fabrics dyed with water lily extract showed relatively high rating in light fastness(3~4, 4~5 rating), washing fastness(4~5, 5 rating), and rubbing fastness(4, 4~5 rating). The silk and wool fabrics dyed with water lily leaves extract showed excellent antimicrobial activity over 98% of bacterial reduction rate against Staphylococcus aureus and Klebsiella pneumoniae. It was confirmed that water lily leaves can be used as a natural dye resource for dyeing wool and silk fabrics because its colorants showed excellent affinity and antimicrobial functionality as well as good colorfastness.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.115-121
• /
• 2017

Demands for nylon suede as an artificial leather are increasing due to its functionality and aesthetics. To achieve high value added nylon suede based on green technology, this study was carried out in order to obtain useful data for the nylon suede fabrics with eco-friendly dyeing process by a pad-steam method instead of a dip dyeing process using sulphur black dye to reduce the industrial waste of water. The dyeability of the nylon suede was investigated according to reducing temperatures, dye concentrations, and reducing agent's concentrations. Throughout the results of the CIE $L^*a^*b^*$ and Munsell values, the optimized dyeing conditions of the nylon suede using sulphur black dye are $70^{\circ}C$ of dyeing temperature, 30% o.w.f. of dye concentration, and $9g/{\ell}$ of reduction agent concentration, respectively. Furthermore washing colorfastness, light colorfastness and perspiration colorfastness were achieved in the range of 4-5 grades.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.175-182
• /
• 2009

Waterborne polyurethanes (WPUs) based on isophorone diisocyanate and mixed polyols of poly(tetramethylene glycol) (PTMG)/polycarbonate diol (PCD) were synthesized. The variation of mechanical and dyeing properties and alkali resistance of the WPU films were analyzed according to the polycarbonate (PC) content. The tensile strength of the films increased and the elongation at break decreased with the PC content in the WPU film. The incorporation of PC component in the WPU film did not affect the alkaline hydrolysis behavior. The synthesized WPU solutions were used as impregnating resins for the production of PET artificial leathers. The prepared WPU resins showed the good color fastness to washing, rubbing, and light of the artificial leather fabrics. The improvement of the properties became greater with the PC content in the WPU resin.

• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.135-146
• /
• 2019

A series of azo based disperse dyes were synthesized and applied to polyester(PET) fiber in supercritical carbon dioxide($ScCO_2$). Various aniline derivatives were used as diazo component and coupled with glycine ethylester or carbonic acid ethylester derivatives to give azo based disperse dyes. Depending on the various diazo substituents, absorption maxima varied from 415 to 529nm in acetone. Dyeing in $ScCO_2$ was carried out at $120^{\circ}C$ and 250bar pressure for 2hrs with 0.5% o.w.f. of dye concentration. Dyed PET fiber had excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• Textile Coloration and Finishing
• /
• v.33 no.1
• /
• pp.10-23
• /
• 2021

In order to synthesize the dye suitable for supercritical carbon dioxide(ScCO2) dyeing, a series of azo based disperse dyes were prepared using various aniline derivatives as diazo components and indol derivatives as coupling components. Dyeing process in ScCO2 of the synthesized dyes was performed on PET fiber at 120℃ for 2 hrs under 250bar pressure with 0.5% o.w.f. of dye concentration. The absorption maxima varied from 400 to 580nm depending on the substituted groups in aniline derivatives and the indol derivatives. The dyes showed high molar extinction coefficients(ε) of 27,000~61,000M-1cm-1. Dyed PET fiber exhibited excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.191-201
• /
• 2021

In this study, an eco-friendly indigo reduction system(scale up reduction, use of buffer solution, and pH control) using baker's yeast(Saccharomyces cerevisiae) was applied for natural indigo(Polygonum tinctorium) dyeing of Hanji fabric and Hanji-mixture fabric(Hanji/Cotton, Hanji/Silk). The effect of concentration of baker's yeast, repeat dyeing, and bath reuse was investigated in terms of dye uptake indicating reduction power. And the oxidation-reduction potential(ORP) was monitored. We also evaluated color properties and colorfastness according to the color strength. The yeast concentration did not significantly affect the maximum reduction power. However, the highest yeast concentration was effective in improving the initial dye uptake, and its the reduction retention power was the most excellent. Even on the last reduction day, the effect of increasing the dye uptake by repeat dyeing was observed. And it was confirmed that the reduction bath could be reused for up to 30 days by supplementing yeast at the end of reduction. For all the fabrics used, deeper and darker PB color were obtained by repeat dyeing. As dyeing was repeated, purplish tint got stronger on the Hanji/Silk fabric compared to other fabrics. Regardless of the composition of Hanji fabrics and color strength, washing and dry cleaning fastness were relatively good with above rating 4-5, and fastness to rubbing and light were acceptable with a rating 3-4 ~ 4-5. The eco-friendly natural indigo dyeing process using niram and baker's yeast would offer global marketability and diversity of Hanji product as a sustainable high value-added material.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.82-96
• /
• 2023

The purpose of this study is to enhance the usability of hanji fabrics by expanding the color space of hanji fabrics. For the expression of various colors of hanji fabrics, single and combination dyeing were carried out using natural indigo(Niram, Polygonum tinctorium), marigold extract colorant, and madder extract colorant for three types of hanji fabrics with different fiber compositions(hanji, hanji/cotton, hanji/silk). The light, medium, and deep colors obtained through individual single dyeing were shown to be PB Munsell colors in the case of indigo dyeing, Y color for marigold dyeing, and R color for madder dyeing. For combination dyeing, indigo dyeing was first carried out under the conditions for light, medium, and deep colors, respectively, and marigold or madder dyeing was performed thereafter. Indigo and marigold combination dyeing produced PB, B, BG, G, and GY Munsell colors and indigo and madder combination dyeing produced PB, P, RP, and R Munsell colors. Overall, the color change of hanji/silk fabric was more diverse than that of hanji fabric and hanji/cotton fabric. In the indigo, marigold, and madder combination dyeing into individual deep colors, blackish PB and P Munsell colors was obtained. Colorfastness to washing, dry cleaning, rubbing, and light were relatively good with above rating 4. Finally, 9 colors excluding YR color out of 10 Munsell color were obtained. We confirmed that the expansion of the color space of Hanji fabrics by the single and combination dyeing with indigo, marigold, and madder.

• Journal of the Korean Vacuum Society
• /
• v.19 no.6
• /
• pp.442-452
• /
• 2010

Our team carried out a new program for public engagement on nanotechnology in Korea. We chose 22 monitors, who majored in science or technology and graduated from universities long time ago. Most of them were married and housewives. This 'focus group' had not only general knowledge about science or technology but also much interest in social activities. The 167 nanoproducts to be monitored were for daily life, e.g. home appliances (washing machine, refrigerator, water purifier, etc), clothing, cosmetics, food, toy, and others. And the period of it was one month. The monitors had a sheet with 10 questions, and filled them out in essay form. All of them submitted 2~3 sheets every weekend to our team. Before monitoring, our team had a meeting for introduction and explanation about the potential risk of nanotechnology as well as benefits from it. Another meeting was held after finishing monitoring to share their experience one another. The main results of the monitoring were as follows: the number of nanoproducts describing both the definition of 'nano' and the size of nanomaterials was just 2 (1.2%) the number of them explaining the technical methods enough was 15 (9/0%) the number of them accounting for the reason of functional improvement enough was 14(8.4%); the number of them doubtful as if there would be exaggeration or false knowledge was 27 (16.2%); the number of them commenting potential hazards to human health or environment was almost zero; the number of them describing about safety certification acceptable was 9 (5.4%). The monitors made a proposal containing recommendation to Government and industry. The contents were as follows: industry should make the manual in detail and correctly, Describe Certificate detailed and correctly, Do research on risk and toxicity continually, Educate employee about nanoproducts at consumer's center; Government should make indication of nanoproducts compulsory, Appoint Certificate Authority and make Certificate Mark guaranteeing the safety on nanoproducts, Make detailed explanation about nanoproducts compulsory.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.54-63
• /
• 1985

This studies has been carried out how to effect on electrostafic propensity of synthetic fabrics by coating with 0.5% acrylic polymer solution which was previously developed by the author to improve anticrease nature of silk. The work conditions are: (A) Applied synthetic polymer was acrylic polymer 525, developed by the author. (B) Electrostatic voltage for various fabrics were carried out by Korea standard abrasion partner with Korea standard (KS K 0905) cotton, nylon, polyester and the self sample fabric. (C) Applied fabrics for the investigations were carried out by using abrasion partner with Korea standard (KS K 0905) cotton, nylon, polyester and the self sample fabric. (D) Electrostatic propensity investigations were carried out by use of sample as silk, nylon, polyester and acrylic fabrics, seperating before finish or after finish. (E) Washing after the finish or the original fabric was carried out by Korea standard method, KS K 0465. Through the investigations, he happened to find many interesting matters and the obtained results are as followings. 1. Electrostatic voltage for the finished fabrics increased more than their original silk, nylon, acrylic fabrics except polyester fabric. (See Table 5) 2. Electrostatic voltage for the finished polyester against K.S. polyester decreased remarkably than the original fabric test. 3. In spite of no problem on electrostatic propensity of silk, it showed high electrostatic voltage between the same nature fabric abrasion, because silk is very weak against abrasion and because the test method had been developed to be useful for only synthetic fabrics. 4. Electrostatic voltage increased more in case of abrasion between different nature of fabrics than the same nature of fabrics. 5. Electrostatic voltage of each fabric increased by repeat of wash. 6. Many investigation data were followed with Contact Electrification Series Principle, another word, the farther each other located fabric on the series abrasion was, the higher electrostatic voltage. (See Fig. 6) 7. Such investigation gives warning of use on the mix fiber spinning service as far as concern with electrification. 8. It may also call attention for such increase of electrification in case any finishing of silk textile.