• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.289-290
• /
• 2003

본 연구는 폴리에스터-나일론 파워 네트 원단의 건열특성을 다룬 것이다. 이 건열특성은 스판덱스(spandex)의 특성에 크게 영향을 받는다. 스판덱스는 통상 활용할 수 있는 신도가 500~600 %에 이른다는 성질 때문에 섬유제품에 많이 응용되고 있다 이는 탄성이 양호하여 스타킹용, 수영복용 등으로 많이 활용하고 있다. 또한 스판덱스는 마모와 마찰강도가 고무보다 우수하고 탄성이 아주 좋고 리 쓰인다. (중략)

• Journal of the Korean Society of Costume
• /
• v.50 no.8
• /
• pp.5-16
• /
• 2000

This study attempts to examine compound weave among silk fabrics of Cho-Sun Dynasty. These silk fabrics have colorful patterns. They can be classified into two types by their texture structure one is called polychrome woven silk of which structure is plain or twill fabric : another is called satan damask of which structure is stain fabric. Their texture structure consist of warp and weft. In addition. there are other types of warp and weft for pattern structure ; various twill structures were used for patterns. A variety of colorful threads, including gold and silver ones. are used fur patterns in them. The brocaded-type fabric was primarily developed during Won Era of China. It was most developed in Ko-Rye Kingdom. During that era flat strip was used the most but its length was usually not long enough to finish one pattern. However, wrapped thread was increasingly used during the middle and later period of Cho-Sun Dynasty due to the development of weaving technology for gold thread. The brocaded-type fabric was produced in Korea and it was also Imported from China according to some record. There are some domestic empirical documents that show the names of imported Satin Samite, Brocaded satin and these are good evidence to prove the nationwide use of the cloth during Cho-Sun Dynasty. The density ratio of warp and weft is almost same except Samite in the third and Satin with flower motif in the second period is most density among them. C·F of Brocaded satin with Mang motif in the third period values the highest price. Brocaded satin, used with both gold and silver threads, is thickest.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.1-6
• /
• 1996

Towing tension of the model nets were determined by the load cell(O~20kg, 20DBBP) in front of W$T_mA$ = 1.57 . $V^1.86$ (unit: kg, mlsec) $T_mB$= 1.58 . $V^1.90$ 2. The towing tension of the full scale net was almost coincided with the results obtained by the model experiment. The towing tension(T) can be expressed as a function of the towing veJocity(V) as T=479$V^1.75$(unit: kg, k't)

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1141-1145
• /
• 2005

This paper proposes a robust tension control algorithm for the let-off and take-up system driven by servo motor which is robust to disturbance and tension variation by using SVR(Support Vector Regression). Quality of textile goods in fiber manufacturing process highly depends on control of let-off, take-up and tension which are essential for constant tension control of yarn and textile fabrics and correct length of them. The physical properties of textile fabrics are very sensitive to several factors(temperature, humidity, radius change of warp beam etc.) which result in tension change. Rapid development of fiber manufacture machine for higher productivity requires control system for let-off, take-up and tension for robustness to sharp tension-variation and quick response. The validity and the usefulness of the proposed algorithm are thoroughly verified through numerical simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.2
• /
• pp.149-157
• /
• 2004

Implicit finite element analysis of the flat surface-straight edge hemming process is performed by using a commercial code ABAQUS/Standard. Methods of finite element modeling for springback simulation and contact pair definition are discussed. An optimal mesh system is chosen through the error analysis that is based on the smoothing of discontinuity in the state variables. This study has focused on the investigation of the influence of process parameters in flanging, pre-hemming and main hemming on final hem quality, which can be defined by turn-down, warp and roll-in. The parameters adopted in this parametric study are flange length, flange angle, flanging die corner radius, face angle and insertion angle of pre-hemming punch, and over-stroke of pre-hemming and main hemming punches.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.118-128
• /
• 1999

The shape of the net mouth in a midwater trawl gear is examined by measuring towing speed, gear resistance, the width of otter boards, net height, and so on of a full-scale gear in operation. In addition, a mathematical model is developed to predict shapes of the net mouth. In the model, shapes of head, ground, side ropes, which governs the shape of net mouth, are assumed as a catenary. The validity of the model is tested with observations. The results can be summarized as follows: 1. The warp tension and vertical opening of the gear is highly dependent to the towing speed. The depth of the gear and width of otter boards are very sensitive to the variations of the warp length. 2. The model results indicate that the wing tip of the head and side ropes is reduced and the vertical distances of the head and side ropes sagged to the back with increasing towing speed. 3. The results of comparing the measured net height with calculated side rope height were satisfying. 4. The results of analysis showed the vertical axis of the net mouth was decreased and the width of the net mouth was little changed when the towing speed increased.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.191-203
• /
• 2007

The purpose of this study was to present a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was $3.1{\sim}5.1cm$, hips circumference was $-1.2{\sim}4.2cm$, thigh circumference was $-0.9{\sim}3.1cm$ and pants length was $3.4{\sim}6.1cm$. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.2
• /
• pp.113-121
• /
• 2005

How to extimate the angle of attack of a vertical V-type cambered otter board was described. A three-dimensional semi-analytic treatment of a towing cable system was applied to the field experiments of a midwater trawl obtained by the Scanmar system. Also the equilibrium condition of the horizontal component and vertical component of forces and moment around the otter board was used. When the warp length was 300m long and the towing speed was between 2.61 and 3.86 knots, the estimated angle of attack of the otter board was ranged between $24.7^{\circ}$ and $26.2^{\circ}$, though the maximum lift force was at the angle of attack $22^{\circ}$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.189-193
• /
• 1997

We make an ultrasonic system as a trial to measure the distance between trawl doors, and carried out a water tank ($24{\times} 24$m, water depth 1 m) experiment for confirming the practical use of the system in October 1996. This system calculates the distance between the pinger (50 kHz) and the transponder (50 kHz/70 kHz) attached each one on the trawl door by measuring the time-difference of receiving with two channels receiver on the trawler. This paper assums that both the length of the warp from the stern to the trawl door is same. At results the system shows a good relation between the distance and the time-difference of receiving while the location of the pinger is moved in variously in the water tank, and it was found that the method of measuring techniques on the prototype system could be applied to the measurement of the trawl door opening in the field experiment.

• Textile Coloration and Finishing
• /
• v.14 no.5
• /
• pp.261-267
• /
• 2002

Cotton fabrics were immersed in aqueous solution of N-methylmorpholine N-oxide(NMMO) with various concentrations, padded by 300% of pick-up, concentrated at $90^\circ{C}$ for 30min under constant-length condition, washed, and dried, to examine a possibility of linen-like finishing by the solvent bonding between fibers. With increasing the concentration of NMMO, cross-sections of fibers changed to oval or polygonal shapes and not only the fibers but also the warp and weft were bonded each other, which produced linen-like effect on the fabrics in the aspects of appearance and mechanical properties such as the Increase of stiffness and shear properties. The thickness, moisture regain and dyeability were increased with the concentration of NMMO.