• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.51-58
• /
• 1999

The dimensional properties on polyester warp knitted fabrics with various lengths of underlap were studied. The results indicated that loop density increased with decreasing loop length and loop density of satin warp knitted fabric are a little higher than that of reverse satin warp knitted fabrics at a constant loop length. As the distance of underlap becomes shorter, the weight per unit area and thickness increases, the bulkiness decreases and the shrinkage of knitted fabrics become larger toward wale in satin warp knitted fabric and toward the course in reverse satin warp knitted fabric.

• 수산해양기술연구
• /
• 제24권2호
• /
• pp.78-82
• /
• 1988

한국근해의 중층 트로올선에서 전개판의 수중중량을 경감시켜서 끌줄을 길게 주므로서 전개력을 향상시키기 위하여 스티로폴뜸을 전개판의 천정판에 고정시키고 끌줄 길이와 예망속력을 변화시켰을 때의 전개판의 깊이와 전개간격을 실측한 것을 분석.검토한 결과는 다음과 같다. 1. 전개판 깊이는 끌줄 길이가 100m이고 예망속력이 101~108m/sec인 범위에서 뜸이 있을 경우 41~25m, 뜸이 없을 경우 45~26m이고, 뜸줄 길이가 150m일 경우는 뜸이 있을 경우 68~44m, 뜸이 없을 경우 74~46m로서 뜸이 있을 경우가 없을 경우보다도 9~4% 정도 얕았다. 또 실측치는 어느 경우나 계산치보다도 15% 작았다. 2. 전개판의 전개간격은 끌줄 길이가 100m이고, 예망속력이 1.1~1.8m/sec인 범위에서는 뜸이 있을 경우 34~41m, 뜸이 없을 경우 30~38m이고, 끌줄 길이가 150m일 때는 뜸이 있을 경우 44~50m, 뜸이 없을 경우 37~46로서 있을 경우가 없을 경우보다도 끌줄 길이 100m에서 10%, 150m에서 15%정도 더 컸다. 또, 실측치는 계산치보다 항상 컸으며 계산치에 대한 실측치의 비는 끌줄 길이가 100m일 때 1.17~1.14, 150m일 때 1.17~1.09이었다. 3. 날개 끝 간격은 끌줄 길이 100m인 때 뜸이 있을 경우가 없을 경우보다 1m 정도 크고 유효망구면적으로는 10% 정도 크며, 끌줄 길이가 150m인 때는 그 차이가 2m로서 유효망구면적으로는 20% 정도 크다고 추정된다. 따라서 전개판에 뜸을 달아서 전개판의 수중중량을 일시적으로 가볍게 해 주는 것은 유효망구면적을 크게 하므로 어획성능향상에 상당히 도움이 될 것이 기대된다

• 수산해양기술연구
• /
• 제36권4호
• /
• pp.281-286
• /
• 2000

저층트롤 실물 어구를 이용한 해상 실험을 통하여 예망 중인 어구의 망구 형태에 관련되는 전개판의 간격 및 망고 등을 예망 속도별, 끌줄의 길이별로 측정하고, 이론적인 수치 해석 결과와 비교하여 실물어구의 수중 현황을 해석함으로서 어구의 효율적인 운용과 어획효과의 증대를 위한 기초자료를 제공하고자 한다. 수중 현황을 해석한 결과를 요약하면 다음과 같다. 1. 전개판의 전개간격은 예망 속도와 끌줄길이의 증가에 따라 직선적으로 증가하며 끌줄 길이에 의한 증가율이 예망 속도에 의한 증가율보다 현저히 크게 나타났으며, 그 간격의 변화는 57.0∼82.8m로서 후릿줄과 그물목줄 및 그물길이 전체의 43∼62%를 차지하였다. 2. 망구의 높이는 예망 속도와 끌줄길이의 증가에 따라 직선적으로 감소하며, 예망 속도에 의한 감소율이 끌줄 길이에 의한 감소율보다 현저히 크게 나타났는데 그 높이의 변화는 3.1∼4.0m로 나타났다. 3. 양 날개끝의 간격이 커지면 망고는 낮아지나 끌줄 길이가 증가할수록 날개 끝 간격의 증가에 대한 망구 높이 감소율의 비는 점차 작아졌다. 4. 망고에 대한 양 날개 끝 간격의 비는 예망속도와 끌줄 길이의 증가에 따라 점차 커졌는데, 그 비는 4.17∼7.81로 나타났다.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.122-128
• /
• 2005

The experiments were conducted to fine out the handling characteristics of the FMT(Frame Mideater Trawl) in the southern waters of Korea using a trawler "DONGBAEK" belongs to Yosu National University. The realtionship between the net depth D(m) and the warp length L(m) at the towing speeds of 2.5k't and 3.5k't werw as follows ; D(m) = 0.30L - 1.3(2.5k't), D(m) = 0.16L - 1.5(3.5k't). Therefore, the net depth was 3.0m deeper when the warp length was 10m longer at the towing speed of 2.5k't and was 1.6m deeper for 10m longer at the speed of 3.5k't, respectively. The sinking speed of FMT was 6.5m/min when the warp releasing speed was 24m/min at the towing speed of 2.5k't and was 3.8m/min for 25m/min at the towing speed of 3.5k't, respectively. The rising speed of FMT was 6.9m/min when the warp rewinding speed was 28m/min at the towing speed of 2.5k't and was 5.3m/min for 25m/min at the towing speed of 3.5k't, respectively. The mean elapsed time getting to the stable towing condition was 104sec at the towing speed of 2.5k't and was 105sec at the towing speed of 3.5k't, respectively, and there was no time difference for the towing speed variation. During the towing, the net depth was comparatively stable on the condition of no change for the warp length and the towing speed.

• 수산해양기술연구
• /
• 제36권4호
• /
• pp.274-280
• /
• 2000

본 연구는 실습선에서 사용 중인 6폭짜리 저층트롤 어구의 저항을 끌줄의 길이와 예망 속도별로 분석하기 위하여 그물의 저항과 전개판의 저항을 계측하고, 어구의 저항계수를 산정하였으며, 그 결과를 요약하면 다음과 같다. 1. 시험 어구의 저항은 끌줄의 길이가 길수록 증가하나, 저항 R$\sub$t-w/=3800v$^2$으로 대표할 수 있다. 2. 그물 어구의 저항은 끌줄의 길이에 따라 다소 증가하나, 그물 어구의 저항 R$\sub$n/=10R$\sub$n/=10d/lλ$\sub$a/λ$\sub$b/v$\^$1.3/의 식으로 대표할 수 있다. 3. 시험 어구의 전개판의 저항 R$\sub$b/=1810v$\^$0.8/으로 대표할 수 있다. 4. 끌줄의 길이별로 측정된 저항값과 Koyama의 저항식과 비교하면, 예망속도가 작을 때는 시험 어구의 저항이, 예망속도가 클 때는 Koyama의 저항식에 의한 저항값이 크게 나타났다.

• 수산해양기술연구
• /
• 제34권3호
• /
• pp.294-301
• /
• 1998

Towing performance of a midwater trawl system was examined aboard the training ship KAYA(2900ps) at the East Sea using the midwater trawl gear that had been designed and manufactured in accordance with the vessel. In this experiment, the trawl system data, the towing speed, the length and tension of the warp, net mouth height, and the depth of otter boards and net were measured and analyzed. The results are as follows: 1. In case of heaving in the warp with constant towing speed, the tension was suddenly increased and then again was reduced and after returned to the original steady state tension. At this time, net height was reduced a bit by ascension of ground rope, but returned to it’s original value. In the case where the warp was paid out, the tension was suddenly decreased and after increased and then returned to the tension of the original state, and the net height was greatly increased instantly by the sinking of the ground rope and then returned to the steady state 2. In the case of increased towing speed mm constant warp length, the tension was increased, and reducing the net height, the gear depth was decreased. On the other hand, in the case where towing speed was reduced, the tension was reduced and the gear depth and net height was increased. 3. Otter boards show a swing motion in the scope of 5~ 10m continuously. Otter boards responded to the state change of the trawl system at first, and then the motion of the net appeared. 4. The depth of net center was about 20m deeper than that of the otter boards, it shows about 0.4 times the warp length at the 4knots towing speed.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.49-55
• /
• 1986

The authors carried out an experiment to determine the horizontal opening of the mid water trawl gear, which is the same as was used in the foreward experiment concerned to the attitude and opening efficiency of otter board. The trawl net .used in the experiment was designed to have a square sectional four-seamed body with two three-sepenlted wings. Each wing tip was rigged with a net pendant of 70 m long and the fore ends of the pendants were directly jointed to the otter pendant without inserting hand rope, and a front weight of 200 kg weigh was rigged with in front of the lowest wing tip. To determine the opening between otter boards ani between wing tips, two 50 KHz fish finders were set sideways on the otter board and on the port middle wing tip so as to detect the distance froa the finders to the starboard otter board and to the wing tip respectively, and the informations were transmitted to the indicators onboard the ship through water-tight cables. The results obtained can be summarized as follows: 1. The openings between otter borads were 43-45 m in case of the warp 100 m, 53-55 m in the war;> 150 m and 54-59 m in the warp 200 m. It was increased in linear according to the increase of towin; speed in the range of 1. 1-1. 8 mlscc. 2. The determined values of the openings between otter boards were greater than the estimated values. which were calculated by the opening between warps at the gallows of the ship and the length of tt~ warp, assuming that the warps from the top rollers to the otter boards were straight. The rates of the determined values to the estimated values were 1. 23-11. 0 in case of the warp 100 m, 1. 23-1. 12 in the warp 150 m and 1. 23-1. 15 in the warp 200 m respectively. The rates were almost the same at the slow towing speed of 1. 3 mlscc or so, then the higher the speed, the less the rate, and the longer the warp, the greater the rate. 3. The rates of the openings between otter boards to the total length of net pendant and the net (excluded cod end) showed 43-43% in case of the warp 150-200 m. It was a little smaller than th~ standard. which is 50%. in the common bottom trawl. 4. The determined openings between wing tips were 18-19 m in case of the warp 100m, 21-22 m in the warp 150 rn, They showed that the higher the speed, the greater the openings even though its range was no more than 1 m or so. 5. The rates of openings between otter boards to th~ openings betwee:l wing tips were almost invariably 38%. 6. The rates of openigs b2tween otter boards to the lenth of h~ad rope were 60-65% in cas': of th~ warp lOa-150m. It were much larg2r than th~ standard. which is 50%. in the common botto:n trawl.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.51-56
• /
• 2006

Power net fabric is one of the highly extensible two-way fabrics. Power net structure shows special characteristics in the wearing of final functional clothes. This research evaluated effects of treatment temperature on proportional extensibility and shrinkage ratio of spandex at a given wale length. As treatment temperature increased, extensibility increased proportionally to the standard length of the sample and the shrinkage ratio in the direction of course and wale increased. The pulling-out length increased proportionally to the standard length of the sample. However it was affected by the effect of treatment time and temperature due to the thermal properties of spandex filament yarn.

• 복식
• /
• 제33권
• /
• pp.217-228
• /
• 1997

The purpose of this study was to investigate influence of the construction method of the circular skirt on drapability and shape of static silhouette and length variation. In made 24 types of skirts giving the variations (six kinds of peach skin-like finished fabrics two types of cutting method two types of machine stitch method of hem), The results were as follows: 1. Analysis of drapability In the cutting method thre was similarity between warp direction and true bias direc-tion. In the machine stitch method of hem there was similarity between blind stitch and blind stitch machine. According to the fabrics analysis of drapability was excellent in the order N/P 80/20(fabric 1)>P 100(fabric 5)>P 100(fabric 6)>P 100 (fabric 2)>P 100 (fabric 4)>N/C 50/50(fabric 3). 2. Analysis of the characteristics values of static silhouette shape In the cutting method shape of static sil-houette became wide in the warp direction. In the machine stitch method of hem shape of static silhouette became wide in the blind stitch. According to the fabrics shape of static silhouette became most wide in the N/C 50/50(fabric 3) and shape of static sil-houette become most narrow in the P 100(fabric 2,5) 3. Analysis of the length variation In the cutting method the true bias direc-tion was longer than the warp direction. In the machine stitch method of hem there was simi-machine stitch method of hem there was simi-larity between blind stitch and blind stitch ma-chine. In fabrics the P 100(fabric 6) showed the longest the N/C 50/50(fabric 3) showed most slight. Interaction between the cutting and messure-ment part of skirt lengh. In the warp diretion parts that showed longest length variation were C. G, K, O in the true bias diretion parts that showed most slight length variation were A, E, M, I.

• 수산해양기술연구
• /
• 제39권1호
• /
• pp.33-43
• /
• 2003

본 연구는 현재 국내에서 사용되는 쌍끌이 중층망 어구어법에서 문제점으로 지적되고 있는 고속예망에서 망고의 제어가 어렵다는 점, 망목에 뜸이 걸려서 파망이 자주 일어나는 점, 네트드럼에 감기는 어구부피가 너무 크다는 점 등의 해결방법으로 무부자 쌍끌이 중층망의 모형실험을 통하여 우리 나라 쌍끌이 중층망에 대한 적용 가능성을 검토하는데 있다. 이를 위하여 850ps급 쌍끌이 기선저인망어선에서 현재 사용되는 실물망을 1/100로 축소 제작한 모형망에서 뜸을 모두 제거하고 끌줄을 양쪽으로 각각 두가닥으로 분리한 후 추를 부착하여 아래끌줄의 길이를 조절함으로써 망고를 제어할 수 있는 무부자 쌍끌이 중층망의 모형어구를 제작하여 회류수조에서 유속에 대한 아래끌줄의 길이에 따른 어구의 전개성능 등을 규명하고 기준형과 비교 분석한 결과를 요약하면 다음과 같다. 1. 유체저항은 무부자망이 기준형보다 약 10∼20%정도 작았으며, 무부자망의 유체저항은 동일유속에서 아래끌줄이 길어짐에 따라 약 1ton씩 증가하였다. 또, 동일유속에서 dL이 10m씩 증가함에 따라 아래끌줄에 작용하는 저항은 약 5%씩 감소하고, 그 반면에 윗 끌줄에 작용하는 저항이 증가하였다. 2. 망고는 직선에 가까운 지수함수적으로 감소하는 경향을 보였으며, 동일유속에서 아래끌줄이 길어짐에 따라 증가하여 로그함수적인 경향을 보였다. 또한, 망고감소율은 무부자망의 경우가 기준형보다 작게 나타났으며, 그 차이는 유속이 증가함에 따라 더욱 커져 dL이 30m인 무부자망을 기준으로 3.0knot일 때 12%, 4.0knot일 때 25%로 나타났다. 3. 망폭은 유속이 증가함에 따라 약 2m 내외로 거의 일정하였으며 무부자망이 기준형보다 크게 나타났다. 4. 망구면적은 유속이 증가함에 따라 지수함수적으로 감소하는 경향을 보였으며, 망구면적의 감소율은 기준형보다 무부자망이 더 작게 나타났다. 여과량은 유속이 증가함에 따라 로그함수적인 경향을 보였으며 기준형이 3.0knot 이상에서 급격히 감소하였지만, 무부자망은 4.0knot까지 증가하였다가 완만하게 감소하였다. 5. dL의 최대적정길이는 망구면적 및 여과량이 최대인 30m일 때이며, 추의 최적위치는 4개의 그물목줄이 연결되는 지점이었다.