• ALGAE
• /
• v.18 no.2
• /
• pp.107-119
• /
• 2003

Neosiphonia is separated from the traditionally well known genus Polysiphonia (Rhodomelaceae, Rhodophyta) and 12 species includes in Korea. In this study, the vegetative and reproductive developments of two Neosiphonia species, N. decumbens (Segi) M.S. Kim et I.K. Lee and N. harlandii (Harvey) M.S. Kim et I.K. Lee, are reinvestigated. N. decumbens is diagnosed by following combination of the characters: plants 1-3 cm high, dwarf, decumbent, main axes indistinct, irregularly branched in dichotomous manner, and alternately or secundly ramified with wide angles above. N. harlandii is distinguished by the features: plants 4-8 cm high, usually solitary and saxicolous, erect, densely corticated at base of distinct main axes, rather irregularly alternate in branch, and with cicatrigenous branchlets developed numerously on every part of frond. The two species share typical characteristics of the genus Neosiphonia, such as a base attached by unicellular rhizoids, cut off by cross wall, pericentral cells in 4, trichoblasts moderately developed near the apex of branches, leaving persistent scar-cells, tetrasporangia arranged in a spiral series, procarps with 3-celled carpogonial branch, and spermatangial branches arising as a primary branch of trichoblast. Taxonomy of the two Neosiphonia in regard to Polysiphonia is discussed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.32.1-32.1
• /
• 2018

Novel soft magnetic materials can be achieved by altering material properties such as morphology, composition, crystallinity, and grain size of soft magnetic alloys. Especially, magnetic properties (i.e., saturation magnetization, coarcivity) of soft magnetics are significantly affected by grain boundaries which act as a control of magnetic domain wall movement. Thus, we herein develop a two-step electroless plating method to control morphology and grain size of FeCo films for excellent magnetic properties. Accordingly, the chemical composition to control the degree of polarization of FeCo alloys was altered by electroless deposition parameters; for example, electrolyte concentration and temperature. The grain size and crystallinity of FeCo alloys was dramatically affected by the reaction temperature because the grain growth mechanism dominantly occurs at $90^{\circ}C$ where as the neucleation only happens at $50^{\circ}C$. By simply controlling the temperature, the micron-sized FeCo grains embedded FeCo film was synthesized where the large grains allow high magnetization originated from larger magnetic domain with low corecivity and the nano-sized grains allow excellent soft magnetic properties due to the magnetic correlation length.

• Journal of Plant Biology
• /
• v.37 no.1
• /
• pp.53-67
• /
• 1994

The opal phytolith types in Oryza sativa L. were examined with light and scanning electron microscope, and we suggested the standard tenninoligies based on original cells of the phytoliths in situ. The distinctive fonus of opal phytoliths were observed in all plant parts such as leaf blade, leaf sheath, culm, root, glume, lemma, and palea. The phytolith fonus originated from long cell, short cell, and dennal appendages were different from part to part. The opal phytoliths derived from the long cells showed the most various form: twelve types were identified based on side wall shape. The results showed that the leaf blade did include almost all types of opal phytolith observed in the other parts of rice.f rice.

• Journal of the Korean Geographical Society
• /
• v.37 no.4
• /
• pp.317-336
• /
• 2002

Dongrae-bu, the administrative central area in Busan in Chosun-dynasty(1392-1910), performed the large parts of diplomatic and trading functions with Japan because of its geographical conditions. Because of his location, landscape of Dongrae city-wall is the mirror of political and military meaning in Chosun-dynasty period. Elements of landscape, such as site of city-wall, location and morphology of gates, government official buildings and the road systems can be interpreted by the functional and socio-cultural terms. The changes of landscape during Japanese colonial period(1910-1945) show that destruction of city-walt went on for the purpose of imperialism. Especially, the landscape which had political meaning in Chosun-dynasty had erased in terms of modem urban planning. Cates of city-wall, official guest house, fortress which symbolize the governing and political power of Chosun-dynasty were destructed almost perfectively. New road system was imported Urban planning was effective instrument through which city-wall could be destroyed for the Japanese colonialism. Under those processes, traditional structure was changed towards the dependency on Japan. Those relict landscape are remained in present urban landscape such as road system, cul-de sac, house and cornerstones. Those results of this study show that city-wall in Korea should be studied in terms of socio-cultural aspects in each periods.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.9-18
• /
• 2007

The purposes of this study were to examine the variability of adhesive thickness on the different site of the cavity wall when used total-etch system without filler and simplified self-etch system with filler and to evaluate the relationship between variable adhesive thickness and microtensile bond strength to the cavity wall. A class I cavity in six human molars was prepared to expose all dentinal walls. Three teeth were bonded with a filled adhesive, $Clearfil^{TM}$ SE bond ana the other three teeth were bonded with unfilled adhesives, $Scotchbond^{TM}$ Multi Purpose. Morphology and thickness of adhesive layer were examined using fluorescence microscope. Bonding agent thickness was measured at three points along the axial cavity wall edge of cavity margin (rim). halfway down each cavity wall (h1f), internal angle of the cavity (ang). After reproducing the adhesive thickness at rim, h1f and ang, micro-tensile bond strength were evaluated. For both bonding agents, adhesive thickness of ang was significantly thicker than that of rim and h1f (P <0.05). As reproduced the adhesive thickness, microtensile bond strength was increased as adhesive thickness was increased in two bonding agents. Adhesive thickness of internal angle of the cavity was significantly thicker than that of the cavity margin and the halfway cavity wall for both bonding agents. Microtensile bond strength of the thick adhesive layer at the internal angle of the cavity was higher than that of the thin adhesive layer at 1,he cavity margin and the halfway cavity in the two bonding systems.

• Korean Journal of Poultry Science
• /
• v.32 no.1
• /
• pp.49-54
• /
• 2005

An experiment was conducted to investigate whether dietary yeast (Saccharomyces cerevisiae, SC) and its' structural components, i.e., yeast cell-extract (YE) and yeast cell-wall (CW) could influence growth performance, ileal morphology and serum lipids of male broiler chickens. There were four dietary treatments, each consisting of 6 replicates (10 birds per replicate). Chickens were fed a corn-soybean meal base control diet and diets containing SC ($0.5\%$), YE ($0.25\%$) and CW ($0.25\%$), respectively for 5-wk-experimental period. Dietary SC, YE and CW versus the control diet did not affect growth performance of male broiler chickens. Ileal morphology as to villus height, crypt depth and villus:crypt ratio of birds fed on the control diet was not significant from those fed on diets rich in SC, YE and CW, respectively. Dietary SC significantly lowered (P<0.05) serum total cholesterol by on average $19.7\%$ as compared to the control group. In addition, chickens fed on diets with either YE or CW lowered serum cholesterol by on average 15.3 and $12.5\%$, respectively as compared to the control albeit that the former only reached statistical significance. In conclusion, our study observed the hypocholesterolemic effect of SC in male broiler chickens. Moreover, YE, i.e., an extract of intracellular components of SC contains active molecules that are responsible far lowering serum cholesterol concentrations, but their identification at the molecular level needs to be assessed.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.37-46
• /
• 2007

The C-shaped canal system is an anatomical variation mostly seen in mandibular second molars, although it can also occur in maxillary and other mandibular molars. The main anatomical feature of C-shaped canals is the presence of fins or web connecting the individual root canals. The complexity of C-shaped canals prevents these canals from being cleaned, shaped, and obturated effectively during root canal therapy, and sometimes it leads to an iatrogenic perforation from the extravagant preparation. The purpose of this study was to provide further knowledge of the anatomical configuration and the minimal thickness of dentinal wall according to the level of the root. Thirty extracted mandibular second molars with fused roots and longitudinal grooves on lingual or buccal surface of the root were collected from a native Korean population. The photo images and radiographs from buccal, lingual, apical direction were taken. After access cavity was prepared, teeth were placed in 5.25% sodium hypochlorite solution for 2 hours to dissolve the organic tissue of the root surface and from the root canal system. After bench dried and all the teeth were embedded in a self-curing resin. Each block was sectioned using a microtome (Accutom-50, Struers, Denmark) at interval of 1 mm. The sectioned surface photograph was taken using a digital camera (Coolpix 995, Nikon, Japan) connected to the microscope. 197 images were evaluated for canal configurations and the minimal thickness of dentinal wall between canal and external wall using 'Root Thickness Gauge Program' designed with Visual Basic. The results were as follows : 1. At the orifice level of all teeth, the most frequent observed configuration was Melton's Type C I (73%), however the patterns were changed to type C II and C III when the sections were observed at the apical third. On the other hand, the type C III was observed at the orifice level of only 2 teeth but this type could be seen at apical region of the rest of the teeth. 2. The C-shaped canal showed continuous and semi-colon shape at the orifice level, but at the apical portion of the canal there was high possibility of having 2 or 3 canals 3. Lingual wall was thinner than buccal wall at coronal, middle, apical thirds of root but there was no statistical differences.

• Parasites, Hosts and Diseases
• /
• v.24 no.1
• /
• pp.89-94
• /
• 1986

The authors would record the fifth case of human fascioliasis in Korea, occurring in a 48 year old Korean man who lived in Munkyong, Kyongsangbuk-do. The diagnosis was based on the morphology and measurements of the eggs which were collected in necrotic debris from the tunnel-like ulcerations of the gallbladder wall which was surgically removed for a gall stone. Although we failed to find out the fluke in the specimen, there found an evidence of once presence of Fasciola in the inflamed wall of the gallbladder in this patient.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.16.1-16.1
• /
• 2011

Gas sensor properties of $WO_3$ nanowire structures have been studied. The sensing layer was prepared by deposition of tungsten metal on porous single wall carbon nanotubes followed by thermal oxidation. The morphology and crystalline quality of $WO_3$ material was investigated by SEM, TEM, XRD and Raman analysis. A highly porous $WO_3$ nanowire structure with a mean diameter of 82 nm was obtained. Response to CO, $NH_3$ and $H_2$ gases diluted in air were investigated in the temperature range of $100{\sim}340^{\circ}C$ The sensor exhibited low response to CO gas and quite high response to $NH_3$ and $H_2$ gases. The highest sensitivity was observed at $250^{\circ}C$ for $NH_3$ and $300^{\circ}C$ for $H_2$. The effect of the diameters of $WO_3$ nanowires on the sensor performance was also studied. The $WO_3$ nanowires sensor with diameter of 40 nm showed quite high sensitivity, fast response and recovery times to $H_2$ diluted in dry air. The sensitivity as a function of detecting gas concentrations and gas sensing mechanism was discussed. The effect of dilution carrier gases, dry air and nitrogen, was examined.

• Fibers and Polymers
• /
• v.5 no.3
• /
• pp.198-203
• /
• 2004

Composite films were prepared by casting the solution of polyacrylonitrile (PAN) and single wall nanotube (SWNT) in DMF subsequent to sonication. The SWNTs in the films are well dispersed as ropes with 20-30 nm thickness. Moreover, AFM surface image of the composite film displays an interwoven fibrous structure of nanotubes which may give rise to conductive passways and lead to high conductivity. The polarized Raman spectroscopy is an ideal characterization technique for identification and the orientation study of SWNT. The well-defined G-peak intensity at 1580 $cm^{-1}$shows a dependency on the draw ratio under cross-Nicol. The degree of nanotube orientation in the drawn film was measurable from the sine curve obtained by rotating the drawn film on the plane of cross-Nicol of polarized Raman microscope. The threshold loading of SWNT for electrical conductivity in PAN is found to be lower than 1 wt% in the composite film. The electrical conductivity of the SWNT/PAN composite film decreased with increasing of draw ratio due to the collapse of the interwoven fibrous network of the nanotubes with uniaxial orientation.