• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4013-4026
• /
• 1996

A numerical simulation has been carried out for the jet impinging on a flat plate and a semi-circular concave surface. In this computation finite volume method was employed to solve the full Navier-Stokes equation based on a non-orthogonal coordinate with non staggered variable arrangement. The standard k-.epsilon. turbulent model and low Reynolds number k-.epsilon. model(Launder-Sharmar model) with Yap's correction were adapted. The accuracy of the numerical calculations were compared with various experimental data reported in the literature and showed good predictions of centerline velocity decay, wall pressure distribution and skin friction. For the jet impingement on a semi-circular concave surface, potential core length was calculated for two different nozzle(round edged nozzle and rectangular edged nozzle) to consider effects of the nozzle shape. The result showed that round edged nozzle had longer potential core length than rectangular edged nozzle for the same condition. Heat transfer rate along the concave surface with constant heat flux was calculated for various nozzle exit to surface distance(H/B) in the condition of same jet velocity. The maximum local Nusselt number at the stagnation point occurred at H/B = 8 where the centerline turbulent intensity had maximum value. The predicted Nusselt number showed good agreement with the experimental data at the stagnation point. However heat transfer predictions along the downstream were underestimated. This results suggest that the improved turbulence modeling is required.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.281-291
• /
• 1995

이 연구의 목적은 수동형 격납용기 냉각계통의 용기 바깥표면이 건조 및 습한 조건일때 격납용기 내, 외벽에서 일어나는 열전달과정에 대한 실험적 자료를 얻는데 있다. 시험모델은 AP 600구조에 근거하여 격납용기의 둘레중 60$^{\circ}$부분만을 취하였다. 시험모델의 주요치수는 원형의 값을 대략 10분의 1로 축소한 것이다. 붕괴열을 모의하기 위하여 전기적으로 가열되는 증기발생기를 시험모델내에 설치하였다. 최대열유속은 8.91 kW/$m^2$ 이었다. 두 가지 형식의 시험이 수행되었다. 하나는 수막유동없이 공기만의 자연대류에 관한 시험이고 다른 하나는 수막유동과 공기의 자연대류가 동반된 증발열전달 시험이다. 시험결과 수막유동이 없는 경우 공기만의 자연대류 열전달 능력은 약 1.48 kW/$m^2$ 열유속에서 제한되고 있음을 알게 되었다 또한 수막유동과 공기의 자연대류가 동시에 일어나는 시험에서 열제거 능력은 현저히 향상됨을 알게 되었다 이들 열전달 측정치들을 기존 관계식들과 비교하였다.

• 한국재료학회지
• /
• 제27권12호
• /
• pp.658-663
• /
• 2017

Urchin-structured zinc oxide(ZnO) nanorod(NR) gas sensors were successfully demonstrated on a polyimide(PI) substrate, using single wall carbon nanotubes(SWCNTs) as the electrode. The ZnO NRs were grown with ZnO shells arranged at regular intervals to form a network structure with maximized surface area. The high surface area and numerous junctions of the NR network structure was the key to excellent gas sensing performance. Moreover, the SWCNTs formed a junction barrier with the ZnO which further improved sensor characteristics. The fabricated urchin-structured ZnO NR gas sensors exhibited superior performance upon $NO_2$ exposure with a stable response of 110, fast rise and decay times of 38 and 24 sec, respectively. Comparative analyses revealed that the high performance of the sensors was due to a combination of high surface area, numerous active junction points, and the use of the SWCNTs electrode. Furthermore, the urchin-structured ZnO NR gas sensors showed sustainable mechanical stability. Although degradation of the devices progressed during repeated flexibility tests, the sensors were still operational even after 10000 cycles of a bending test with a radius of curvature of 5 mm.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.371-381
• /
• 2023

Evaluating the effectiveness of the radiation protection measures deployed at the Centralized Radioactive Waste Management Facility in Ghana is pivotal to guaranteeing the safety of personnel, public and the environment, thus the need for this study. Radiagem^TM 2000 was used in measuring the dose rate of the facility whilst the personal radiation exposure of the personnel from 2011 to 2022 was measured from the thermoluminescent dosimeter badges using Harshaw 6600 Plus Automated TLD Reader. The decay store containing scrap metals from dismantled disused sealed radioactive sources (DSRS), and low-level wastes measured the highest dose rate of 1.06 ± 0.92 µSv·h^-1. The range of the mean annual average personnel dose equivalent is 0.41-2.07 mSv. The annual effective doses are below the ICRP limit of 20 mSv. From the multivariate principal component analysis biplot, all the personal dose equivalent formed a cluster, and the cluster is mostly influenced by the radiological data from the outer wall surface of the facility where no DSRS are stored. The personal dose equivalents are not primarily due to the radiation exposures of staff during operations with DSRS at the facility but can be attributed to environmental radiation, thus the current radiation protection measures at the Facility can be deemed as effective.

• 센서학회지
• /
• 제6권4호
• /
• pp.328-336
• /
• 1997

HWE 방법에 의해 CdSe 박막을 (100)방향 Si 기판 위에 성장시켰다. 증발원과 기판의 온도를 각각 $600^{\circ}C$, $430^{\circ}C$로하여 성장시킨 CdSe 박막의 이중 결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)값이 380 arcsec로 가장 작았다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자농도의 In n 대 (1/T)에서 구한 활성화에너지는 0.19eV로 측정되었다. Hall 이동도의 온도 의존성은 30K에서 150K까지는 $T^{3/2}$에 따라 증가하여 불순물산란에 기인하고, 150K에서 293K까지는 $T^{-3/2}$에 따라 감소하여 격자산란에 기인한 것으로 고찰되었다. 광전도셀의 특성으로 spectral response, 최대 허용소비전력(MAPD), 광전류와 암전류(pc/dc)의 비 및 응답시간을 측정하였다. Cu 증기분위기에서 열처리한 광전도셀의 경우, 감도(${\gamma}$)는 0.99, pc/dc은 $1.39{\times}10^{7}$, 그리고 최대 허용소비전력(MAPD)은 335mW, 오름시간(rise time)은 10ms, 내림시간(decay time)은 9.5ms로 가장 좋은 광전도 특성을 얻었다.

• The Korean Journal of Physiology
• /
• 제7권1호
• /
• pp.23-31
• /
• 1973

Numerous factors concern with the absorption of substances through the membrane of the gastrointestinal tract. To simplify the experimental condition, present work has been restricted to observe the disappearance rate of substance from the intestinal loop which was made in the jejunum, 70 cm apart from the pylorus of the adult rabbit. The purpose of the study is to clarify the absorption of urea through the jejunal wall is solely attributable to the concentration difference between the luminal fluid and plasma, and to observe the effect of adding red pepper upon the rate of absorption. The rabbits were anesthetized with nembutal, 35mg/kg I.V. Jejunal loop was made by ligating at 2 spots, 70 cm and 80cm apart from the pylorus. After rinsing with normal saline solution through the polyethylene tubing inserted from the end of the loop, 8 ml of test solution was placed through the same tubing. The test solution contained 200 mg% of urea and 150mg% of polyethylene glycol(M.W. 4,000) in normal saline solution. Right after placing the test solution the first specimen was taken through the tubing, and successive samplings were performed at 5, 10, 20, and 30 minutes. Logarithm of the difference of urea concentration between the luminal fluid and plasma was plotted against time elapsed after the onset of the experiment. If straight line is revealed, it would verify the nature of transport mechanism as diffusion, obeying the Fick's principle. The concentration of polyethylene glycol (PEG) was also measured in order to examine the change in the volume. PEG was used as the marker substance because it is not absorbable in the intestinal tract. Consequently the concentration of PEG relates inversely to the volume of the loop. Instantaneous concentration of urea in the loop times the volume will give the amount of urea remaining in the luminal fluid. The change in the amount of any substance is directly relate to the volume of the compartment and differs from the change in the concentration which is independent of the volume. After completion of the experiment without red pepper, it was added in the test solution and was centrifuged after thorough mixing. Supernatant of the mixture was placed in the loop and similar sampling were performed with the same time intervals that of previous run in order to observe the effects of the red pepper on the passive transport of the water soluble small substance, urea. The results obtained were as follows: 1. Logarithm of the concentration difference of urea between the luminal fluid and plasma was diminished exponentially as time elapsed. The decay constant in the experiment without red pepper was 0.0563/min. By adding red pepper in the test solution as much as the concentration rose to 4,000 mg% and 8,000 mg%, the decay constants were lowered to 0.0493/min and to 0.0506/min, respectively. The time interval by which the concentration difference dropped to one half of the initial value was prolonged. Without red pepper the half concentration time was 13.30 minutes, and by adding extract of red pepper, 15.31 minutes and 15.71 minutes were revealed. 2. The profile of the diminishing rate of tile amount of urea was quite different from that of the concentration because of the change in the volume of the loop during the observed period. 3. By adding the extract of red pepper, it slowed down the rate of absorption of urea in the intestinal loop, suggesting an increase in the diffusional barrier. 4. Larger dosage of red pepper brought an increase in the secretion of intestinal fluid with concomitant expansion of the luminal volume, and the retardation of the absorption of urea was noticed. This effect was largely dependent on the sensitivity of the individual animal to the red pepper, extract. The amount of urea remained after 10 minutes interval was 55.5% of the initial amount in the experiment without red pepper. On the other hand it was not consistent after administration of red pepper, showing 50.6% and 66.5% of the initial figures by adding 400 mg and 800 mg of red pepper in the test solution, respectively. It was postulated that symptom of diarrhea often encountered by taking a hot (red pepper) food might be attributable to the increase of secretion and the retardation of absorption in the intestinal tract.

• Journal of the Korean Wood Science and Technology
• /
• 제3권1호
• /
• pp.3-15
• /
• 1975

How to stabilize wood against shrinking and swelling in variable atmospheric moisture conditions is important to the wood-using industry and a challenge to research. Polyethylene glycol stabilize wood by bulking the fiber. PEG also serve as a chemical seasoning agent, suppress decay in high concentrations, and have slight effect on physical properties, gluing or finishing. The study designed to determine the effect of PEG-400 on the dimensional stabilization of local hardwoods for wood carvings that could supply a greatly expanding tourist trade and making curved furniture parts, lamp stands and other decorative objects, and possible gunstock. The species examined were 6 species, Seo-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acer mono), Karae-Namoo (Juglans mandshurica), Jolcham-Namoo (Quercusserrata) and Sanbud-Namoo (Prunus sargentii), used as block of 5cm thick radially to the grain, 7cm wide tangentially, and 70cm long parallel to the wood grain. All these test piecies were conditioned above the fiber saturation point before impregnation. The stabilization effects were determined for PEG-400 treated woods in a 50 percent solution for 20 days. The following conclusions were obtained. PEG retentions increased with treating time. It was more effective to treat at 60$^{\circ}C$ than at room temperature. In degree of PEG-400 impregnation on species, Cheungcheung-Namoo havinglow specific gravity had the highest retentions, 68.77% but the lowest, 56.33% was shown in Jolcham-Namoo with high specific gravity. Specific gravity of treated wood increased considerably with effectiveness of polymer loading. The increases in specific gravity were 5.36 to 13.16 percent. The highest was Jolcham-Namoo, the lowest Karae-Namoo. On the dimensional stability, a 40 percent of effectiveness of polymer loading was just as effective as 60 percent in reduction in water absorptivity (RWA), antishrinkage efficiency (ASE) and antiswelling efficiency (AE), and from over 60 percent they increased more rapidly. Also species response varied considerably. ASE was 30.12 to 69.97 percent tangentially and 27.86 to 56.37 percent radially, AE 34.06 to 73.76 percent tangentially and 30.11 to 70.12 percent radially, and RWA 42.31 to 65.32 percent. No differences in volume swelling among the 6 species were observed. Its values were ranged from 14.98 to 19.55 percent and also increased with PEG retentions. On the mechanical properties, the strengths very much decreased with PEG-400 loadings as shown in Figure 12; that were 11.41 to 22.90 percent in compression, 21.61 to 34.35 percent in bending and 22.83 to 36.83 percent in tensile strength. PEG retention in cell wall was less than 1 percent and the most of PEG were immersed in cell lumen. Except for Korae-Namoo, effectivenesses of polymer loading were as much high as 61.58 to 75.02 percent. This is believed to be due to the effect of PEG-400 on excellant dimensional stability of treated woods.

• 터널과지하공간
• /
• 제11권3호
• /
• pp.257-269
• /
• 2001

지하 500 m의 화강암반내 단층지역에 위치한 지하 방사성폐기물 처분장의 구조거동을 이해하기 위하여 수치 해석을 수행하였다. 해석에는 2차원 해석코드인 UDEC을 사용하였다. 해석모델은 화강암반, 처분공내의 압축 벤토나이트로 둘러싸인 PWR 사용후 핵연료 처분용기 및 처분동굴내에 채워진 혼합 벤토나이트를 포함한다. 한 개의 단층이 처분동굴의 지붕과 벽이 만나는 지점을 33, 45, 및 $58^{\circ}$의 각도로 관통하는 세가지 다른 경우게 대한 구조거동을 비교, 분석하였다. 그리고 $45^{\circ}$단층의 경우에 대해서는 수리역학적, 열역학적, 및 열수리역학적 상호작용 거동을 해석하고 비교, 분석하였다. PWR 사용후 핵연료내의 방사성 물질로부터 나오는 시간의존 방사성 붕괴열에 의한 영향을 해석하였다. 지하수위는 지표면 아래 10 m로 가정하였고, 지하수해석은 정류 알고리즘을 사용하였다.

• 자원환경지질
• /
• 제35권5호
• /
• pp.407-420
• /
• 2002

군위 삼존석굴(국보 109호)은 반상 흑운모 화강암으로 구성되고 이들의 훼손은 풍화에 의해 미생물얼룩, 백색피막, 갈색녹, 입상분해, 변색과 절리 등으로 나타나며 풍화의 요인은 주로 빗물, 누출수분, 기온변화, 생물서식 등이다. 이들의 환경인자는 수분이며 이의 공급원은 빗물이고 공급통로는 절리이다 빗물이 화강암 내의 절리를 따라 스며들어 석굴내부로 누출되어 습기를 많게 하며 미생물을 서식케 하고 결빙을 일으킨다. 삼존석굴 주변의 화강암은 북동동과 북서서 절리조를 규칙적으로 발달시키며, 서로 공액관계에 있어 하나의 절리계를 나타낸다. 북동동 절리조가 훨씬 뚜렷하게 나타나고 석굴 주위에서 4개 절리대를 형성하며, 이중에 J$_{m}$ 과 J$_{3}$ 절리대가 누수의 직접적인 원인이 된다 J$_{m}$ 절리대는 석굴 안쪽의 인장절리로 통하며, 이 인장절리는 석굴 상위의 큰 소나무가 J$_{m}$ 절리틈을 벌림으로서 J$_{m}$ and J$_{3}$ 절리대간의 암반이 토플링 효과로 벌어진 단열이다. 이 경로는 매우 길기 때문에 작은 빗물은 석굴내부까지 누출되지는 않겠지만 큰비는 누출을 상당히 오래 지속시킬 것으로 생각된다. J$_{3}$ 절리대는 석굴입구에서의 훼손에 영향을 미치며, 이곳에는 절리와 균열이 매우 많고 경로가 매우 짧기 때문에 10 mm 이내의 작은 비에도 빗물이 쉽게 석굴내부로 스며든다. 결과적으로 J$_{m}$ 과 J$_{3}$ 절리대가 누수의 원인을 제공하는 빗물의 주 유입부인 것으로 판단되고 문화재를 훼손하는데 큰 영향을 미치는 것으로 생각된다.

• Nuclear Engineering and Technology
• /
• 제27권5호
• /
• pp.645-660
• /
• 1995

표준원전을 대상으로하여 저수위 운전시의 잔열제거제통상실사고를 RELAP5/MOD3 및 RELAP5/MOD3.1 전산프로그램을 이용하여 분석하였다. 증기발생기가 이용가능할 때 원자로냉각재계통에 배기 경로가 없는 경우와 배기경로가 있는 경우에 대하여 분석을 수행하였다. 배기경로가 없는 경우에 대해 RELAP5 /MOD3 전산프로그램과 RELAP5 /MOD3.1 전산프로그램으로 비교 분석을 수행하였다. 분석 결과 두 전산프로그램의 계산결과는 정성적인 면 뿐 아니라 정량적 인면도 비교적 잘 일치하였다. 그러나 계산결과로부터 RELAP5 /MOD3의 경우에는 벽 열전달모델의 결함이 발견되어 배기경로가 있는 경우에 대해서는 RELAP5 /MOD3.1 전산프로그램을 이용하여 분석을 수행하였다. 분석결과 원자로정지후 하루가 지났을때 배기경로가 없는 경우에는 두개의 증기발생기로도 잔열이 충분히 제거되지 않아 원자로계통의 압력이 지속적으로 증가하여 사고개시 후4,000초 정도에 원자로계통의 임시밀봉재의 설계압력인 0.24MPa에 도달하였다. 가압기 안전밸브 용량의 세배정도 크기의 배기경로가 있는 경우에는 10,000 초가 지나도 원자로냉자재계통의 압력이 0.24 MPa에 도달하지 않았으며 노심노출이 초래되지 않았다. 분석결과의 상세한 검토를 통해서 저수위 운전시 잔열제거능력 상실사고가 발생하였을 경우 REL-AP5/MOD3.1을 이용한 사고해석 방법론의 타당성을 제안하였으며 또한 적절한 배기용량을 산정하기 위한 자료를 제공하였다.