• 한국공간구조학회논문집
• /
• 제4권4호
• /
• pp.65-76
• /
• 2004

Walking loads are usually considered as nodal loads in the finite element vibration analysis of structures subjected to walking loads. Since most of the walking loads act on elements not nodes, the walking loads applied on the elements should be converted to the equivalent nodal walking loads. This paper begins with measuring walking loads by using a force plate equipped with load cells and investigates the characteristics of the walking loads with various walking rates. It is found that the walking loads are more affected by walking rates than other parameters such as pedestrian weight, type of footwear, surface condition of floor etc. The measured walking loads are used as input loads for a finite element model of walking induced vibration. Finally, this paper proposes the equivalent nodal walking loads that are converted from the walking loads acting on elements based on finite element shape functions. And the proposed equivalent walking loads are proved to be applicable for efficient analysis of floor vibration induced by walking loads.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.173-188
• /
• 2002

보행하중을 받는 바닥판 구조물의 진동해석을 위해서 일반적으로 계측한 보행하중을 적용하거나 Bachmann의 보행하중식을 사용하게 된다. 다양한 매개변수의 영향을 받는 보행하중은 계측이 쉽지 않으며 Bachmann 보행하중식은 보행진동수가 2.OHz와 2.4Hz로 제한적이기 때문에 다양한 보행진동수에 따른 보행하중을 적용하기가 곤란하다. 따라서 보행하중을 받는 구조물의 진동해석을 위해서 보행하중의 매개변수 분석과 다양한 보행진동수에 적용이 가능한 보행하중의 모형화가 필요하다. 본 논문에서는 로드셀이 장착된 계측 플레이트를 이용하여 바닥판에 가해지는 보행하중을 직접 계측하고 매개변수를 분석하였다. 그리고 퓨리에 변환을 이용하여 계측한 보행하중을 다양한 진동수를 가지는 조화하중으로 분해하였다. 분해과정을 거쳐 얻은 조화하중의 계수들을 보행진동수에 대한 일정한 함수관계로 유도하여 보행하중을 모형화하였다. 본 논문에서 제안한 보행하중식을 이용하면 다양한 보행진동수에 따라 다르게 나타나는 보행하중을 구조물의 진동해석에 용이하게 적용할 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.273-280
• /
• 2000

Building structures which are in need of large open space make the damping effect of the structures decrease greatly. Assembly and office buildings with a lower natural frequency have a higher possibility of experiencing excessive vibration induced by human activities. These excessive vibration make the residents uncomfortable and the serviceability deterioration. The loads induced by human activities were classified into two types. First type is in place loads as like jumping, foot stamping and body bouncing. The other type is moving loads as like walking, running and dancing. A series of laboratories experiments had been conducted to study the dynamic loads induced by human activities, The earlier works were mainly concerned to parameters study of dynamic loads as like activity type, weight, sex, surface condition of structure and etc. In this paper, we have measured directly the walking loads by using the platform. And we have evaluated and analyzed load-time history of walking loads. One of the most important parameter is pacing rate (walking speed) in the walking loads. The difference between the maximum value and minimum value of walking loads depends on the walking speed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.267-274
• /
• 2003

The objective of this study is to estimate the frequency characteristics of group walking loads based on the information of measured responses. At first, dynamic properties such as natural frequencies and modes are obtained from input/output relation for building structures by heel drop test. Second, a method to estimate group walking loads by the transfer functions from measured responses to group walking loads is proposed. The method turned out to estimate the group walking loads accurately. Higher modes could be important in estimating the amplitude of group walking loads with the information of single walking load.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.414-421
• /
• 2001

Recently, the damping effect of building structures are greatly reduced because the use of non-structures members as like curtain wall are decreased and large open space are in need for the service of buildings. Assembly and office buildings with a lower natural frequency have a higher possibility of experiencing excessive vibration induced by human activities as like jumping, running and walking. These excessive vibration make the occupants uncomfortable and the serviceability deterioration. The common method of application of walking loads for the vibration analysis of structures subjected to walking loads is to inflict a series unit walking load and a periodic function at a node. But this method could not consider the moving effect of walking. In this study, natural frequency and damping ratio of plate structure are evaluated by heel drop tests. And new application of equivalent walking loads are introduced for vibration analysis of real slab system subjected to walking loads. The response obtained from the numerical analysis are compared well to the results measured by experimental tests. It is possible to efficiently analyze the vibration of floor which is subjected to walking loads by applying equivalent walking loads.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.159-166
• /
• 2000

Structures with a long span have a higher possibility of experiencing excessive vibration induced by human activities such as walking, running, jumping and dancing. These excessive vibration give occupants annoyance. The general method for the vibration analysis of structures subjected to walking loads is to apply a series of nodal loads with assigned time delays at the nodes. But this method has a limit in representing the walking loads. In this study, the equivalent nodal loads are introduced for an effective analysis of floor vibration induced by walking loads. And, walking loads with difference walking rate are measured and applied to the analytical model for numerical analysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.459-466
• /
• 2001

The floor vibration aspect for building structures which are in need of large open space are influenced by the interrelation between natural frequency and working loads. Structures with a long span and low natural frequency have a higher possibility of experiencing excessive vibration induced by dynamic excitation such as human activities. These excessive vibrations make the residents uncomfortable and the serviceability deterioration. Need formulation of loads data through actual measurement to apply walking loads that is form of dynamic load in structure analysis. The loads induced by human activities were classified into two types. First type is in place loads. the other type is moving loads. A series of laboratories experiments had been conducted to study the dynamic loads induced by human activities. The earlier works were mainly concerned to parameters study of dynamic loads. In this Paper, the walking loads have been directly measured by using the measuring plate in which two load cells were placed, the parameters, the load-time history of walking loads, and the dynamic load factors have been analyzed. Moreover, the shape of the harmonic loads which were gotten by decomposition the walking loads have been analyzed , and the walking loads modeling have been carried out by composition these harmonic loads derived by functional relation.

• 한국공간구조학회논문집
• /
• 제5권1호
• /
• pp.81-89
• /
• 2005

Walking loads are influenced by various parameters so that they need to be measured considering such parameters. Walking frequency(rate) is experimentally investigated as the most important parameter in determining the walking load expressed with dynamic load factor. This study focuses on the derivation of continuous walking load-time functions at any walking frequency ranging from 1.30Hz to 2.70Hz. Experiments were conducted to obtain time-histories of walking loads at the increment of 0.1Hz, which are decomposed into harmonic loads by the Fourier transformation. The polynomial load-time functions are proposed representing the relationship between harmonic coefficients and walking frequencies, thereby easily formulating walking load-time histories for dynamic load factor with various walking frequencies.

• 한국지진공학회논문집
• /
• 제7권1호
• /
• pp.65-72
• /
• 2003

이 연구의 목적은 무리보행하중을 받는 구조물의 주요 지점에 대한 응답을 계측하고 분석하여 하중의 특성을 파악하는 것이다. 이를 위하여 먼저 건축구조물의 동특성을 파악하였으며 이를 바탕으로 무리보행하중의 주파수 특성을 파악할 수 있는 식을 유도하였다. 그리고, 단위보행하중의 주파수 특성을 바탕으로 무리보행하중의 크기를 평가할 수 있는 방법을 제안하였다. 유도된 식은 무리보행하중의 진동수 및 크기를 잘 나타내었으며, 단위보행하중을 기준으로 한 무리보행하중의 크기를 평가하는 경우에는 고차모드형상을 포함하여야 좋은 결과를 얻을 수 있는 것으로 나타났다.

• 한국지진공학회논문집
• /
• 제5권5호
• /
• pp.35-45
• /
• 2001

최근에 넓은 공간이 요구되는 건축물에서는 칸막이 벽과 같은 비구조재의 사용이 감소됨으로써 감쇠효과가 크게 줄어들고 있으며 고강도재료의 사용으로 바닥판 구조물이 유연화, 장경간화 되어가고 있다. 대형집회공간, 쇼핑몰, 사무실 등과 같이 장경간 건축물에서는 사람의 움직임에 의하여 과도한 진동이 발생할 수 있으며 이러한 진동은 건축물의 사용성을 크게 저하시키는 원인이 되고 있다. 바닥판 진동의 주요 진동원 중의 하나가 보행하중이다. 보행하중을 받는 구조물의 진동해석에 있어서 보행하중을 적용하는 일반적인 방법은 한 절점에 보행하중을 연속적으로 가하거나 주기하중으로 이상화된 동적하중을 가하는 것이다. 그러나 이러한 방법은 보행의 이동효과를 고려할 수 없다. 본 논문에서는 실제 바닥판 구조물의 고유진동수와 감쇠비를 평가하였으며 예제 구조물의 효율적인 진동해석을 위하여 보행하중을 적용하였다.