• 대한산업공학회지
• /
• 제30권3호
• /
• pp.181-189
• /
• 2004

The purpose of this study was to investigate the effects of sleep/wake behavior for shift workers in the iron and steel industry using wrist actigraph for 59 male workers on a continuous full-day three-team three-shift system of backward rotation including on-duty and off-duty periods. The wrist actigraph data were recorded for 15 days (l shift cycle) for each subject. The sleep length at home during night shift decreased significantly as compared to the morning or evening shifts. The night shift nap length increased significantly in all sections as compared to the morning or evening shifts. The nap length in the Steel Manufacturing Process and Rolling Process during night shift decreased significantly as compared to the Machine Maintenance Section, the Forwarding of Products Section, and the Field Management Section. However, the sleep length at home while off-duty period increased significantly. The percentage of nap length during night shift in the Rolling Process, Steel Manufacture Process, and the other three types of jobs was 16.0%, 20.4%, and about 50.0%, respectively. The nap length during night shift for the above 50 year olds increased significantly as compared to the below 50 year olds. Finally, we discussed the role of nap-taking during the burden on night shift workers and the increased difficulty in continuing their job.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.197-204
• /
• 2018

In the present study, unsteady flow analysis has been conducted to investigate the blade forces and wake flow around a hybrid street-lamp having a vertical-axis small wind turbine and a photovoltaic panel. Uniform velocities of 3, 5 and 7 m/s are applied as inlet boundary condition. Relatively large vortex shedding is formed at the wake region of the photovoltaic panel, which affects the increase of blade torque and wake flow downstream of the wind turbine. It is found that blade force has a good relation to the variation of the angle of attack with the rotation of turbine blades. Variations in the torque on the turbine blade over time create a cyclic fluctuation, which can be a source of turbine vibration and noise. Unsteady fluctuation of blade forces is also analyzed to understand the nature of the vibration of a small wind turbine over time. The detailed flow field inside the turbine blades is analyzed and discussed.

• 대한조선학회논문집
• /
• 제36권4호
• /
• pp.21-27
• /
• 1999

본 논문에서는 교란 포텐셜을 기저로 하는 패널방법을 사용하여 물제트를 분사하는 플랩을 가진 타의 성능해석을 수행하였다. 받음각이 큰 경우, 성능해석의 주요 인자가 되는 후류면의 위치를 구하기 위하여 후류면의 roll-up을 포함시킨 Pyo[1]의 방법을 사용하여 계산하였고, 경계면은 쌍곡면 패널로 이산화하였다. 플랩타의 본체와 플랩 사이의 간극유동을 점성유동인 Couette유동으로 가정하여 계산하였고, 간극 사이에서 분사되는 물제트는 유량변화를 소스로, 모멘텀변화를 떨어져 나가는 보오텍스로 가정하여, 간극의 입구와 출구 패널 위에서 경계조건으로 포함시켜 계산하였다. 본 방법의 수치적 검증을 위해 실험값이 존재하는 경우에 대해 실험값과 프로그램의 수치결과를 비교하였다. 비교 결과, 실험값은 계산값과 좋은 일치를 보임을 확인하였다.

• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.693-698
• /
• 2007

로터 공기역학 모사를 위한 수치해석 기법이 제안되었다. 국부적인 유동특성변수를 4차 정확도 내삽의 MUSCL 접근방법을 유한체적 공식에 적용시킴으로써 로터 블레이드로 부터 멀리 떨어져 성긴 격자영역에서의 비 물리적인 수치 확산을 개선시켰다. 또한, 유동특성변수에 따라 각각 다른 제한자를 적용함으로써 수치적인 소산작용을 억제하고 수치적 안정성을 높였다. 대표적인 로터 공기역학 응용문제에 적용한 결과 후류포획성능이 크게 개선됨을 확인하였으나 공력소음계산 결과는 전통적인 MUSCL 기법에 비교하여 큰 개선점은 없었다.

• 오토저널
• /
• 제12권3호
• /
• pp.53-62
• /
• 1990

A wind tunnel experiment for the flow around a 1/5 scale passenger vehicle model has been carried out. A 5-hole Pitot tube is used for measuring velocity distributions around the model and a scanivalve with 48 ports is used for measuring surface pressure distribution at various Reynolds numbers. In order to observe the flow on the surface and in the wake region, a flow visualization experiment has been performed using wool tuft with and without paper cones. In addition, a 2-dimensional viscous calculation considering only the mid-plane section of the model has been performed. A complex wake structure in the immediate rear of the model has been confirmed. The distributions of the surface pressure coefficient are not sensitively dependent on the Reynolds Number. In the first half of the model, they do not seem to vary form section to section. However, in the second half, they do vary from section to section, especially at the bottom surface, which indicates that the cross flow vortex is more affected by the bottom surface than the top surface. The qualitative agreement of the measured and calculated velocity field also explains the usefulness of the 2-dimensional calculation in the limited sense.

• Wind and Structures
• /
• 제13권2호
• /
• pp.145-167
• /
• 2010

By using the 'failure' model approach, the effects of wind direction on the flight of sheathing panels from the roof of a model house in extreme winds was investigated. A complex relationship between the initial conditions, failure velocities, flight trajectories and speeds was observed. It was found that the local flow field above the roof and in the wake of the house have important effects on the flight of the panels. For example, when the initial panel location is oblique to the wind direction and in the region of separated flow near the roof edge, the panels do not fly from the roof since the resultant aerodynamic forces are small, even though the pressure coefficients at failure are high. For panels that do fly, wake effects from the building are a source of significant variation of flight trajectories and speeds. It was observed that the horizontal velocities of the panels span a range of about 20% - 95% of the roof height gust speed at failure. Numerical calculations assuming uniform, smooth flow appear to be useful for determining panel speeds; in particular, using the mean roof height, 3 sec gust speed provides a useful upper bound for determining panel speeds for the configuration examined. However, there are significant challenges for estimating trajectories using this method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.479-482
• /
• 2002

Riblets with longitudinal grooves along the streamwise direction have been used as an effective flow control technique for drag reduction. A flexible micro-riblet with v-grooves of peak-to-peak spacing of $300{\mu}m$ was made using a MEMS fabrication process of PDMS replica. The flexible micro-riblet was attached on the whole surface of a NACA0012 airfoil with which grooves are aligned with the streamwise direction. The riblet surface reduces drag coefficient about $7.9{\%}\;at\;U_o=3.3m/s$, however, it increases drag about $8{\%}\;at\;U_o=7.0m/s$, compared with the smooth airfoil without riblets. The near wake has been investigated experimentally far the cases of drag reduction ($U_o\;=\;3.3 m/s$) and drag increase ($U_o\;=\;7 m/s$). Five hundred instantaneous velocity fields were measured for each experimental condition using the cross-correlation PIV velocity field measurement technique. The instantaneous velocity fields were ensemble averaged to get spatial distribution of turbulent statistics such as turbulent kinetic energy. The experimental results were compared with those of a smooth airfoil under the same flow condition. The micro-riblet surface influences the near wake flow structure largely, especially in the region near the body surface

• Wind and Structures
• /
• 제29권6호
• /
• pp.405-416
• /
• 2019

Aerodynamic characteristic of a small scale wind turbine under the influence of an incoming uniform wind field is studied using k-ω Shear Stress Transport turbulence model. Firstly, the lift and drag characteristics of the blade section consisting of S826 airfoil is studied using 2D simulations at a Reynolds number of 1×10⁵. After that, the full turbine including the rotational effects of the blade is simulated using Multiple Reference Frames (MRF) and Sliding Mesh Interface (SMI) numerical techniques. The differences between the two techniques are quantified. It is then followed by a detailed comparison of the turbine's power/thrust output and the associated wake development at three tip speeds ratios (λ = 3, 6, 10). The phenomenon of blockage effect and spatial features of the flow are explained and linked to the turbines power output. Validation of wake profiles patterns at multiple locations downstream is also performed at each λ. The present work aims to evaluate the potential of the numerical methods in reproducing wind tunnel experimental results such that the method can be applied to full-scale turbines operating under realistic conditions in which observation data is scarce or lacking.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.157-157
• /
• 2012

The Characteristics of the drag reduction of a square prism having a detached splitter plate at the wake side was investigated by measuring of fluid force on the square prism and by visualization of the field using PIV. The experimental parameters were the width ratios(H/B=0.5~1.5) of splitters to the prism width and the gap ratios (G/B=0~2) between the prism and the splitter plate. The drag reduction rate was increased with H/B, and was increased and decreased with G/B. The maximum drag reduction rate was represented by 24.2% at H/B=1.5 and G/B=0.5. The two vortices were generated by the splitter plate at the wake region of the prism. The direction of the vortex was clockwise at the upside of the splitter plate and counterclockwise at the downside.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.593-600
• /
• 2005

The finite volume based multi-block RANS code, WAVIS developed at KRISO, is used to simulate the turbulent flow field around the KRISO container ship (KCS) and the modified KRISO tanker (KVLCC2M). The realizable k-$\varepsilon$ turbulence model with a wall function is employed for the turbulence closure. The free surface flow with and without propeller is mainly investigated for the KCS and the double model flow is concerned for the KVLCC2M which is obliquely towed in still water. The computed results are compared with the experimental data provided by CFD Tokyo Workshop 2005 in terms of wave profiles, hull surface pressure and wake distribution with and without propeller for the HCS and wake distribution and hydrodynamic forces and moments with various drift angles for the KVLCC2M.