• 한국의류학회지
• /
• 제33권7호
• /
• pp.1140-1151
• /
• 2009

This study researches the formative character of 1920's fashion through cinema costumes from the perspective of the theories of W$\"{o}$lfilin and Delong. This study organizes a new perspective such as closed form & open form, part recognition & whole recognition, and flat & rounded to analyze the characteristics of form in the costumes of 'The Great Gatsby', 'Chariots of Fire', and 'Chicago'. The 1920's style in the fashion history is a closed form and flat because of simplicity and functionality. The costumes in Chariots of Fire' that focuses on the reappearance of 1920's fashion is a flat and closed form. However, the costumes of 'The Great Gatsby' that presents a symbolic meaning and 'Chicago' that expresses a splendid look are an open and rounded form. Evening dresses are open, with whole recognition and a rounded form because of sheer fabrics, beading, uneven hemlines, and lighting. Daytime dresses are a closed form and flat because of heavyweight fabrics, dark or achromatic colors and non-patterns. Also, open form and rounded, closed form and flat have a similar distribution in diagrams. When the viewer recognizes the form of clothes, they react in a similar way to two-dimensional and three-dimensional presentations that shows that the form of clothes is recognized by the relation with the body. In addition, this study researches the connection between diverse elements such as clothes, body, movements, space, and external elements such as lighting.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.37-42
• /
• 2003

An experiment was performed to study heat transfer characteristics between corrugated heat exchanger and flat plate type one. While heat capacity(13.86kW) was provided constantly and the flow speed was varied from 2.8 to 17.9m/s, The temperature and the pressure drop were measured. Furthermore, Heat transfer coefficient, Colburn factor and Nusselt number were calculated using them. With increase of the flow speed for both exchangers, the coefficient and the pressure drop increased, but Colburn factor decreased. The coefficient, pressure drop and Colburn factor of the corrugated type were all higher than those of the flat one, which is due to the flow interruption with recirculation and reattachment of the corrugated type. The empirical correlations of Nusselt number were suggested for the tested two heat exchangers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1625-1630
• /
• 2004

An experimental study was carried out to investigate influence of flow conditions on a boundary layer to the near-wake of a flat plate. The flow condition in the vicinity of trailing edge that is influenced by upstream condition history is an essential factor that determines the physical characteristics of a near-wake. Various tripping wires were used to change boundary layer flow condition of upstream at the freestream velocity of 6.0 m/sec. Measurements of the boundary layer and near-wake according to the change of upstream conditions were conducted by using both I-probe(55P14 for boundary layer) and X-probe(55P61 for wake). Normalized velocity profiles of the boundary layer were shown the flow types such as laminar boundary layer, transition, and turbulent boundary layer at 0.95C from the leading edge. The velocity and turbulence intensity profiles of the near-wake for the case of laminar boundary layer at the flat plate surface exhibited a defect and a double peak showing perfect symmetry, respectively.

• 대한원격탐사학회지
• /
• 제8권2호
• /
• pp.131-145
• /
• 1992

A low cost personal computer and image processing S/W were empolyed to derive Digtal Elevation Model(DEM) of tidal flat from multitemporal LANDSAT TM images, and to create three-dimensional(3D) perspective views of the tidel flat on Komso bay in west coasts of Korea. The method for generation of Digital Elevation Model(DEM) in tidal flat was considered by overlapping techniques of multitemporal LANDSAT TM images and interpolations. The boundary maps of tidal flat extracted from multitemporal images with different water high were digitally combined in x, y, z space with tide in formation and used as an inputcontour data to obtain an elevation model by interpolation using spline function. Elevation errors of less than $\pm$0.1m were achived using overlapping techniques and a spline interpolation approach, respectively. The derived DEM allows for the generation of a perspective grid and drape on the satellite image values to create a realistic terrain visualization model so that the tidal flat may be viewed from and desired direction. As the result of this study, we obtained elevation model of tidal flats which contribute to characterize of topography and monitoring of morphological evolution of tidal flats. Moreover, the modal generated here can be used for simulation of innudation according to tide and support other studies as a supplementary data set.

• 대한전자공학회논문지SD
• /
• 제45권2호
• /
• pp.34-43
• /
• 2008

평판 디스플레이 인터페이스를 위한 OpenLDI 수신기 IP를 설계하고, $0.18-{\mu}m$ high-voltage CMOS 공정을 사용하여 프로토타입 칩을 제작하였다. 수신기 회로는 크게 DLL과 parallelizer로 구성된다. DLL은 클록을 재생하고, Parallelizer는 데이터를 병렬화하여 재생된 클록에 정렬한다. 회로의 입력은 한 개의 클록 채널과 네 개의 데이터 채널로 구성된다. 측정을 통해 $10Mhz{\sim}65Mhz$ 범위의 입력주파수에서 클록을 재생하는 것을 확인하였으며, 이는 한 개 채널당 $70Mbps{\sim}455Mbps$의 속도에, 네 개의 데이터 채널을 모두 사용할 시 $280Mbps{\sim}1.82Gbps$의 속도에 해당한다. 상용 LCD 모니터를 개조하여 제작된 칩을 사용한 영상데이터 전송을 실험하였다. 이때의 클록 주파수는 49Mhz, 소모되는 전력은 코어가 19mW, 출력버퍼가 82.5mW로 측정되었다.

• 한국전자파학회논문지
• /
• 제24권10호
• /
• pp.1008-1016
• /
• 2013

한국전파법에서 휴대전화에만 적용되었던 전자파흡수율(SAR: Specific Absorption Rate) 측정 대상기기가 2012년 1월 이후 인체로부터 20 cm 이내에 위치하는 휴대용 송신 무선통신기기로 확대됨에 따라 150 MHz 대역의 무전기가 포함되어 이에 대한 SAR 적합성 평가를 위한 SAR 측정방법이 필요하다. 그러나 현재 SAR 측정방법에 대한 국제표준(IEC 62209-2)에서는 300 MHz 대역 이상의 주파수에 대해서 적용하고 있으며, 상용 SAR 측정시스템에서도 300 MHz 대역 이상의 주파수에 대해서만 측정이 가능하도록 되어 있는 실정이다. 본 논문에서는 150 MHz 대역의 SAR 측정 유효성 평가를 위한 기준 다이폴 안테나(복사체 길이: 760 mm, 반사 손실 : -25.48 dB) 및 평면형 모의인체의 크기($1,300 mm(L){\times}900 mm(W){\times}200 mm(H)$), 수치해석 SAR 목표값(1 g: 1.08 W/kg, 10 g: 0.77 W/kg)을 제시하였다. 제시된 기준 다이폴 안테나 및 평면형 모의인체를 제작하여 상용 SAR 측정시스템의 적합성 여부를 확인하였다. 측정된 1 g 및 10 g SAR 값은 각각 1.13 W/kg, 0.81 W/kg으로, IEC 국제 표준의 유효 범위인 ${\pm}10$ % 이내를 만족하였다. 본 연구를 통해 도출된 규격들은 국내 SAR 측정방법 및 IEC 국제 표준으로 반영될 수 있을 것으로 기대된다.

• 한국패류학회지
• /
• 제15권1호
• /
• pp.21-30
• /
• 1999

본 연구는 1994년 6월부터 1995년 7월까지 광양만의 조화조간대와 덕산조간대에 서식하는 바지락(Ruditapes philippinarum: Bivalvia)의 성장 양상을 알아보기 위하여 수행되었다. 조화조간대의 평균입도, 표층퇴적물내 유기물 함량, 저서미세조류의 엽록소-a 량은 각각 2.50-4.46 , 4.99-5.11%, 14.53-19.90 $\mu\textrm{g}$ $cm^{-3}$이었으며, 덕산조간대는 각각 0.83-1.66 , 2.22-2.34%, 6.20-6.90 $\mu\textrm{g}$ $cm^{-3}$이었다. 바지락의 각장은 봄-여름에 급격히 증가하였고, 가을로 가면서 서서히 둔화되다가, 겨울에 멈추었다. 반면에 육질부 중량은 봄과 가을에 증가하고, 여름과 겨울에 감소하였다. 상태지수 역시 육질부 중량과 동일한 경향을 보였다. 4개 연령군의 각장의 연성장은 von Bertalanffy 성장모델에 잘 적용되었고, 중량은 Gompertz 성장모델에 잘 적용되었다. 초기 각장 성장률 w, 최대 각장 성장률 AGR$_{max}$는 조화조간대가 덕산조간대보다 높았으며, 동일 조간대내에서는 하부조간대가 상부조간대보다 성장률이 높았다. 즉 개체군 서식밀도가 높은 조화조간대에서 이용가능한 잠재적 먹이량, 서식공간에 대한 경쟁이 심하여 개체 성장률이 낮았다.

• 대한수학회지
• /
• 제51권3호
• /
• pp.509-525
• /
• 2014

Let R be a commutative ring with identity. An R-module M is said to be w-projective if $Ext\frac{1}{R}$(M,N) is GV-torsion for any torsion-free w-module N. In this paper, we define a ring R to be w-semi-hereditary if every finite type ideal of R is w-projective. To characterize w-semi-hereditary rings, we introduce the concept of w-injective modules and study some basic properties of w-injective modules. Using these concepts, we show that R is w-semi-hereditary if and only if the total quotient ring T(R) of R is a von Neumann regular ring and $R_m$ is a valuation domain for any maximal w-ideal m of R. It is also shown that a connected ring R is w-semi-hereditary if and only if R is a Pr$\ddot{u}$fer v-multiplication domain.

• 한국의상디자인학회지
• /
• 제18권2호
• /
• pp.101-113
• /
• 2016

This study was conducted in order to analyze draping and flat pattern according to jacket design, and provide basic materials for developing a jacket pattern that can enhance fitness, functionality, and aesthetic expression of clothes by reflecting esthetic expression of draping and efficiency of flat pattern at the same time. For the experimental jacket designs of a one-piece sleeve jacket and a two-piece sleeve jacket were selected among the entries of the designer Rubina for 2014 F/W Seoul Fashion Week. Designer brand Rubina usually produced clothes using draping and the designer brand company provided the experimental patterns for the study. We also had flat patterns of the same design and size specifications designed by a flat patternmaker who has 30 year-experience in flat pattern like Rubina. The test apparel jacket was made of 20's cotton yarns. Three models wore the jackets and evaluation on appearance fitness was conducted by 7 members in an expert panel group from August 10, 2015 to September 10, 2015. As a result of appearance fitness analysis on one-piece sleeve jacket, there were significant difference in 4 items among 17 items in terms of overall appearance. The appearance of jackets by draping had higher score than those using flat pattern. As for two-piece sleeve jacket, there were significant differences in 7 items among 17 items related to overall appearance. As for the items related to sleeve, 5 items out of 13 showed significant differences. Except for one item, appearance of jackets using draping had higher score than flat pattern. As for motion fitness, draping was evaluated to be more comfortable. Applying the items with high scores in appearance and motion fitness in draping to flat pattern, The study suggests a new jacket pattern development that would increase the satisfaction of consumers for future research.

• 열처리공학회지
• /
• 제16권4호
• /
• pp.197-204
• /
• 2003

Honeycomb structure has been fabricated by brazing method using 0.1 wt%C and 1.0wt%C carbon steel core and STS304 stainless steel face sheet. Core shear strength ratio in W and L directions was 1:1.03 in 7 mm cell size, whereas 1:1.45 in 4 mm cell size. Flexural strength on face sheet was 166.4 MPa (0.1 wt%C, W direction), 171.1 MPa (0.1 wt%C, L direction), and 120.2 MPa (1.0 wt%C, W direction) in 7 mm cell size. And in 4mm cell size specimen, it was 169.2 MPa (0.1 wt%C, W direction), 224.2 MPa (0.1 wt%C, L direction). This means that flexural strength of 0.1 wt%C core material was higher than that of 1.0wt%C core material, which was contrary to expectation. SEM and EDS analysis represented that grain boundary diffusion had occurred in0.1 wt%C core, but no grain boundary diffusion in 1.0 wt%C core. And corrugated surface of 0.1 wt%C core was flat, whereas that of 1.0 wt%C core was not flat. As a result, contact area between two 1.0 wt%C cores was much less than that of 0.1 wt% cores, It is thought to be main reason for lower flexural strength of 1.0 wt%C core.