• 대한화장품학회지
• /
• 제22권2호
• /
• pp.132-140
• /
• 1996

The effect of a novel delivery system, water in oil emulsion containing chitosan hydrogel as a inner phase (W/O-C) was evaluated, and the relationships between the skin permeation, the skin primary irritation and the skin turnover rate of AHAs were discussed. We selected glycolic acid (GA), lactic acid (LA), malic acid (MA), and tartaric acid (TA) as model AHAs. The steady state fluxes of 4 AHAs across the excised hairless mouse skin increased as the molecular weights of the AHAs decreased. (GA>LA>MA>TA). The skin turnover times were shortened in all AHAs, compared with control. The skin permeation and the skin primary irritation of the LA decreased and the skin turnover time increased, as the pH increased. The maximum therapeutic index was obtained with pH 3.8, 0.5 M LA. It was suggested that the skin permeability of LA might be a main factor for prediction of the skin irritation and the skin turnover time. On the other hand, the W/O-C containing pH 3.8, 0.5 M LA indicated a good sustained release property of LA, compared with water in oil emulsion without chitosan hydrogel (W/O) or oil in water emulsion (O/W). The skin permeability and the skin irritation of AHAs from the W/O-C edcreased, compared with W/O or O/W, however the skin turnover time showed almost the same value as W/O or O/W. In conclusion, we suggest that the control of the skin permeation of AHAs would be an important tool for reducing the skin irritation and for maintaining the positive effect of AHAs, and the W/O-C system could be a potential candidate for future cosmetological application of AHAs.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.190-197
• /
• 2019

W-K-TiC alloys with different titanium carbide concentrations (0.05, 0.1, 0.25, 0.5, 1, 2) wt.% were fabricated through Mechanical Alloying and Spark Plasma Sintering. The effects of the addition of nano-scaled TiC particles on the relative density, Vickers micro-hardness, microstructure, crystal information, thermal shock resistance, and tensile strength were investigated. It is revealed that the doped TiC nano-particles located at the grain boundaries. The relative density and Vickers micro-hardness of W-K-TiC alloys was enhanced with TiC addition and the highest Vickers micro-hardness is 731.55. As the TiC addition increased from 0.05 to 2 wt%, the room-temperature tensile strength raised from 141 to 353 MPa. The grain size of the W-K-TiC alloys decreased sharply from $2.56{\mu}m$ to 330 nm with the enhanced TiC doping. The resistance to thermal shock damage of W-K-TiC alloys was improved slightly with the increased TiC addition.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.407-413
• /
• 2002

Eutectic high chromium cast irons containing 17%Cr and 26%Cr were produced for this research by making each of them solidify unidirectionally. Abrasion wear test against SiC or $Al_2$O$_3$bonded paper was carried out using test pieces cut cross-sectionally at several distances from the chill face of castings. The wear resistance was evaluated in connection with the parameters such as eutectic colony size($E_w$), area fraction of boundary region of the colony($S_B$) where comparatively large massive chromium carbides are crystallized and, average diameter of chromium carbides in the boundary region($D_c$). The wear rate($R_w$), which is a gradient of straight line of wear loss versus testing time, was influenced by the type and the particle size of the abrasives. The $R_w$ value against SiC was found to be larger than that against A1$_2$O$_3$under the similar abrasive particle size. In the case of SiC, the $R_w$ value increased with an increase in the particle size. The $R_w$ value also increased as the eutectic colony size decreased, and that of the 17%Cr iron was larger than that of the 26%Cr iron at the same $E_w$ value. Both of the $S_B$ and $D_c$ values were closely related to the $R_w$ value regardless of chromium content of the specimens. The $R_w$ values of the annealed specimens were greater than those of the as-cast specimens because of softened matrix structures. As for the relationship between wear rate and macro-hardness of the specimens, the hardness resulting in the minimum wear rate was found to be at 550 HV30.

• 대한화학회지
• /
• 제40권1호
• /
• pp.28-36
• /
• 1996

본 연구의 오핵 착물은 몰리브덴(VI)과 텅스텐(VI)의 다핵 착물, 몰리브덴(O)과 텅스텐(O)의 디니트로실 단핵 착물 및 티오메틸아미드옥심의 반응에서 얻었다. 합성한 착물$(n-Bu_4N)_2[Mo_4O_{12}Mo(NO)_{2}{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (1), $(n-Bu_4N)_2[W_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (2) $(n-Bu_4N)_2[Mo_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (3)은 원소 분석, 적외선, 전자 흡수 및 $^1/H\;NMR$ 스펙트라에 의해 특성을 조사하였다. 착물의 분광학적인 연구는 시스-${M(NO)_2}^{2+}$(M=Mo, W) 단위체 및 착물의 적은 비편재화 존재를 알 수 있다. 합성한 착물$(n-Bu_4N)_2\;[W_4O_{12}Mo(NO)_2{CH_3SCH_2C(NH_2)NHO}_2{CH_3SCH_2C(NH)NO}_2]$ (2)은 X-선 단결정 회절에서 결정구조를 밝혔고, 얻은 데이타는 Monoclinic, $P2_1/a,\;a\;=\;22.14(2){\angs},\;b\;=\;14093(1){\angs},\;{\beta}\;=\;111.08(6){\deg},\;V\;=\;7155(9){\angs}^3,$ Z = 4이었다. 구조 결정에 이용한 회절강도 6191개($I>3{\sigma}(I)$)에 대한 최종 신뢰도 인자는 0.072 이었다. 물질의 골격구조는 텅스텐의 산화상태 6가로 구성된 두 개의 이핵체 $[W_2O_5{CH_3SCH_2C(NH_2)NHO}\;{CH_3SCH_2C(NH)NO}]$와 몰리브덴의 산화상태 0가인 ${Mo(NO)_2}6{2+}$로 형성되어 있다. ${M(NO)_2}^{2+}$(M = Mo, W) 단위체는 형식상 시스 형태이며 기하학적으로 $C_{2v}$ 대칭을 가진다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.307-315
• /
• 2001

The purpose of this study was to provide the evaluation and prediction of strengths of SB latex modified concrete(LMC) using a statistical method and factorial experimental design method. The main experimental variables were as follows ; W/C ( 4 levels ; 31, 33, 35, 42%), S/a( 2 levels ; 55, 58%) and L/C(2 levels ; 5, 15%). The compressive strength and flexural strength of LMC were selected as a factor of response. The statistical method was carried out to analyze the results, together with factorial experimental design method and response surface method. The analysis showed that if L/C had been 15%, W/C appeared to be around 33% to achieve the design strength of $350kgf/cm^2$. In this case, the flexural strength and the slump came to around $68kgf/cm^2$ and 18cm, respectively. Eventhough the L/C varied, the design strength and W/C could be predictable together with slump value and flexural strength. As a result of series of experiments in this study, W/C and L/C were proved to be the main factors influencing on the compressive and flexural strength of LMC. Both of strength and slump values could be predictable from the mixing proportion of LMC.

• 전기의세계
• /
• 제24권1호
• /
• pp.75-85
• /
• 1975

In order to develop the commercial frequency (60Hz) plasma torch of small capacity for material cutting, welding and other industrial heating, the A.C plasma jet generator of non-transfered type is made domestically and the electrode configurations of plasma torch are composed of two kinds of electrodes W-C and W-Cu, combined by thermal emission and field emission electrode materials. In this paper, the characteristics of input power, thermal efficiency, electrode consumption, the flame and forms of arc voltage and arc current for A.C plasma torch are investigated in relation to such variables as arc current, argon flow and magnetic field intensity to obtain the basic design data necessary to A.C plasma jet generator. The result are as follows; (1)The input power, thermal efficiency and electrode consumption are influenced greatly by argon flow, magnetic field intensity and nozzle materials. (2)A.C arc voltage and current are non-symmetrial, involving D.C Component. Due to this current of D.C Component, transformer core is saturated and a large abnormal current flows into the primary winding coil. In order to prevent this abnormal current flow, a condenser must be connected in series to the main discharge circuit. (3)The stability and sharpness of jet flame are improved more in the torch of W-C electrode configuration than in the torch of W-Cu electrode configuration.

• Journal of Microbiology and Biotechnology
• /
• 제12권3호
• /
• pp.508-513
• /
• 2002

Human endogenous retroviral long terminal repeats (LTRs) have been found to be coexpressed with sequences of genes located nearby. It has been suggested that the LTR elements have contributed to the structural change or genetic variation of human genome connected to various diseases. The HERV-W family has been identified in the cerebrospinal fluids and brains of individuals with schizophrenia. Using a cDNA library derived from a human brain, the HERV-W LTR elements were examined and five new LTR elements were identified. These elements were examined using a YAC clone panel from the Xq21.3 region linked to psychosis that was replicated on the Y chromosome after the separation of the chimpanzee and human lineages. Fourteen elements of the HERV-W LTR were identified in that region. Those LTR elements showed a high degree of sequence similarity ($91.8-99.5\%$) with previously reported HERV-W LTR. A phylogenetic tree obtained from the neighbor-joining method revealed that new HERV-W LTR elements were closely related to the AXt000960, AF072504, and AF072506 from the GenBank database. The data indicates that several copy numbers of the HERV-W LTR elements exist on the Xq21.3 region and are also expressed in the human brain. These LTR elements need to be further investigated as potential leads to neuropsychiatric diseases.

• Elastomers and Composites
• /
• 제33권1호
• /
• pp.27-36
• /
• 1998

The surface of wiper blade(W/B) rubber was chlorinated by chemical treatment method using the hydrochloric acid(HCI) and sodium hypochlorite(NaOCl). From the results of contact angle measurement, friction coefficient measurement, and ATR-IR spectra, the surface characteristics of chlorinated W/B rubber with time of chlorination were studied. Contact angles for W/B rubber with increasing time of chlorination and chlorine concentration were measured for the water and ethylene glycol. From the results, contact angle fell rapidly with increasing time of chlorination and chlorine concentration, reaching a constant value after about 10min. And the wettability of W/B rubber surface by means of chlorination has been improved. For an unchlorinated W/B rubber, the friction coefficient with time of chlorination decreased from 1.27 to 0.20~0.23 on full chlorination. As the results it was considered that abrasion resistance of W/B rubber surface has been also improved. The values of pH and $Cl^-$ ion concentration in a chlorine treatment solution decreased as the extent of chlorination of W/B rubber surface increased. From the results of ATR-IR spectra, it was observed that C=C double band of W/B rubber surface transformed into C-Cl band, but quantitative determination of the extent of chlorination was not feasible because of the complexity of chlorination reactions.

• KSBB Journal
• /
• 제14권1호
• /
• pp.103-108
• /
• 1999

혈전 용해효소를 생산하는 미생물을 탐색하기 위하여 장류 및 토양사료로부터 미생물을 분리하여 그 중 fibrin 용해활성이 높고 기질특이성이 우수한 S7-l6 균주를 선발하였다. 선발된 미생물은 Gram 양성의 간균으로 운동성이 있고, catalase 양성이었으며 포자를 형성하는 것으로 관찰되어 BClcilius sp. S7-16으로 명명하였다. $\alpha$cill$\mu$ sp S7-16의 효소생산 조건을 검토한 결과,0.5% (w/v) polypeptone, 0.5% (w/v) yeast extract, 0.3% (w/v) NaCI, 0.l%(w/v) $KH_2P0_4$, 0.3% (w/v) $KH_2P0_4$, 0.01% (w/v) $MgSO_4.7H_20$(pH7.0)의 배지조성하에서 $35^{\circ}C$애서 180 rpm으로 24시간 회전진탕배양하였을 때 fibrin 용해효소 생산이 최대를 보였으며, 이때 casein 용해활성은 나타나지 않았다. Fibrin 용해효소의 효소적 특성을 조사하기 위해 이 조건하에서 얻어진 배양상동액에 20~60% ammomum sulfate 분획침전을 행하여 조효소액을 조제하였으며, 얻어진 조효소액은 pH4~11의 범위에서 안정하였으며, $50^{\circ}C$까지 비교적 활성이 유지되는 열안 정성을 보여주었다. 조효소액의 최적 pH와 온도는 각각 7.5, $40^{\circ}C$부근에서 최적활성을 보였다.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1245-1251
• /
• 2009

고온/고압, 장시간 연소조건에서 비삭마에 가까운 삭마 특성을 갖는 초소형 목삽입재 선정을 위한 연구를 수행하였다. 평가 소재로서 C/SiC, CIT, W/$Y_2O_3$를 선정하였으며, 연소시간 20초의 내열성능평가모타로 시험하였다. 시험 결과 W/$Y_2O_3$가 가장 우수하였으나, 균열이 발생하였다. 본 연구를 통하여 각 소재들의 열반응 특성 및 내열 성능을 이해할 수 있었으며, W/$Y_2O_3$의 적용가능성을 확인하였다.