• 한국광학회지
• /
• 제13권6호
• /
• pp.521-529
• /
• 2002

본 연구에서는 삼차원 공간상에서 절대 좌표를 측정하기 위한 부피 간섭계의 오차원인을 분석하고 각 오차원인이 최종 결과에 미치는 영향을 계산했다. 계산결과 광검출기 배열의 비선형성, 압전소자의 비선형성, 광섬유 내부의 온도변화 둥이 오차의 주요 원인임을 알 수 있다. 제안된 간섭계의 성능을 실험적으로 검증하기 위해 분해능 측정 및 이차원 광학식 스케일과의 비교를 수행했다. 또한 간섭계의 성능을 좀 더 엄밀하게 검증하기 위해 자가보정법을 적용해서 공간상에서 간섭계가 갖는 계통오차를 추출했으며 60mm$\times$60mm$\times$20mm공간에서 최대오차 1 $\mu\textrm{m}$ 이하를 얻었다.

• 지질공학
• /
• 제16권2호
• /
• pp.135-143
• /
• 2006

강우에 의한 사면파괴의 초기단계 및 과정을 규명하기 위하여 실내 사면모델 시험결과를 분석하였다. 이 파괴 초기단계와 관련된 수리학적 상호관계를 파악하기 위해 인공강우 살포동안 사면모델 내 체적함수비 변화를 측정하는데 목적을 두었다. 사면파괴의 과정은 인공강우동안 사면 하단부의 유출면 발달에 의해 파괴를 발생시키는 요인으로 작용하였다. 따라서 국부적인 사면파괴를 예측하기 위해서는 강우에 의해 발생된 침투수의 침투특성에 대한 장기적인 계측이 매우 중요하다. 사면 내에서 강우에 의한 침윤선의 침투 및 지하수위 상승과 밀접한 연관성을 갖는 체적함수비 변화를 3가지의 침투변화(phase I, phase II, phase III로 나누어 사면파괴를 계측할 수 있는 수리학적 측면으로 접근하였다. 따라서 체적함수비가 급격히 증가하는 phase III 단계부터는 사면파괴 발생 가능성이 매우 증가함을 파악하였다. 그러므로 사면 내 체적함수비 변화를 연속적으로 계측함으로써 강우에 의한 사면파괴의 발생을 효율적이고 실질적으로 예측할 수 있을 것으로 판단된다.

• Korean Journal of Radiology
• /
• 제22권3호
• /
• pp.435-441
• /
• 2021

Objective: To evaluate the usefulness of the ventricular volume percentage quantified using three-dimensional (3D) brain computed tomography (CT) data for interpreting serial changes in hydrocephalus. Materials and Methods: Intracranial and ventricular volumes were quantified using the semiautomatic 3D threshold-based segmentation approach for 113 brain CT examinations (age at brain CT examination ≤ 18 years) in 38 patients with hydrocephalus. Changes in ventricular volume percentage were calculated using 75 serial brain CT pairs (time interval 173.6 ± 234.9 days) and compared with the conventional assessment of changes in hydrocephalus (increased, unchanged, or decreased). A cut-off value for the diagnosis of no change in hydrocephalus was calculated using receiver operating characteristic curve analysis. The reproducibility of the volumetric measurements was assessed using the intraclass correlation coefficient on a subset of 20 brain CT examinations. Results: Mean intracranial volume, ventricular volume, and ventricular volume percentage were 1284.6 ± 297.1 cm³, 249.0 ± 150.8 cm³, and 19.9 ± 12.8%, respectively. The volumetric measurements were highly reproducible (intraclass correlation coefficient = 1.0). Serial changes (0.8 ± 0.6%) in ventricular volume percentage in the unchanged group (n = 28) were significantly smaller than those in the increased and decreased groups (6.8 ± 4.3% and 5.6 ± 4.2%, respectively; p = 0.001 and p < 0.001, respectively; n = 11 and n = 36, respectively). The ventricular volume percentage was an excellent parameter for evaluating the degree of hydrocephalus (area under the receiver operating characteristic curve = 0.975; 95% confidence interval, 0.948-1.000; p < 0.001). With a cut-off value of 2.4%, the diagnosis of unchanged hydrocephalus could be made with 83.0% sensitivity and 100.0% specificity. Conclusion: The ventricular volume percentage quantified using 3D brain CT data is useful for interpreting serial changes in hydrocephalus.

• Nuclear Engineering and Technology
• /
• 제29권6호
• /
• pp.488-499
• /
• 1997

The measurements of the moderator temperature coefficient (MTC) are performed to demonstrate that the calculational model produces results that are consistent with the measurements. Since negative MTC is also a technical specification value that may limit the cycle length, it is important to measure it as accurately as possible. In this report, preferred choice of test method depending on the time in cycle, best power indication and temperature definition in MTC calculation were determined based on the MTC test results taken during initial startup testing and at 2/3 cycle burnup in the Yonggwang nuclear power plant. The results show that the ratio and rodded methods provided good agreement with the predictions during initial startup testing. However, near end-of-cycle the depletion method gives better results, and so is suggested to be used in the MTC measurements at 2/3 cycle burnup. The use of primary Delta T power as a power indicator in the MTC calculations is highly advisable since it responds with good consistent results very quickly to changes unlike secondary calorimetric power. For the appropriate temperature definitions used in the MTC calculations, it is considered that the arithmetic average temperature measured simply by inlet and outlet thermocouples is preferred. Although volumetric average temperature provides better results, the improvement is not sufficient to compensate for the simplicity of calculations by arithmetic average temperature.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.31-43
• /
• 2016

Applications of ultrasonic tomography to concrete structures have been reported for many years. However, practical and effective application of this tool for nondestructive assessment of internal concrete condition is hampered by time consuming transducer coupling that limits the amount of ultrasonic data that can be collected. This research aims to deploy recent developments in air-coupled ultrasonic measurements of solids, described in Part 1 of this paper set, to concrete in order to image internal inclusions. Ultrasonic signals are collected from concrete samples using a fully air-coupled (contactless) test configuration. These air coupled data are compared to those collected using partial semi-contact and full-contact test configurations. Two samples are considered: a 150 mm diameter cylinder with an internal circular void and a prism with $300mm{\times}300mm$ square cross-section that contains internal damaged regions and embedded reinforcement. The heterogeneous nature of concrete material structure complicates the application and interpretation of ultrasonic measurements and imaging. Volumetric inclusions within the concrete specimens are identified in the constructed velocity tomograms, but wave scattering at internal interfaces of the concrete disrupts the images. This disruption reduces defect detection accuracy as compared with tomograms built up of data collected from homogeneous solid samples (PVC) that are described in Part 1 of this paper set. Semi-contact measurements provide some improvement in accuracy through higher signal-to-noise ratio while still allowing for reasonably rapid data collection.

• Journal of Biosystems Engineering
• /
• 제27권3호
• /
• pp.227-234
• /
• 2002

This study was conducted to nondestructively estimate the volumetric information of peach and pit and to visualize the 3D information of internal structure from magnetic resonance imaging(MRI) data. Bruker Biospec 7T spectrometer operating at a proton reosonant frequency of 300 MHz was used for acquisition of MRI data of peach. Image processing algorithms and visualization techniques were implemented by using MATLAB (Mathworks) and Visualization Toolkit(Kitware), respectively. Thresholding algorithm and Kohonen's self organizing map(SOM) were applied to MRI data fur region segmentation. Volumetric information were estimated from segemented images and compared to the actual measurements. The average prediction errors of peach and pit volumes were 4.5%, 26.1%, respectively for the thresholding algorithm. and were 2.1%, 19.9%. respectively for the SOM. Although we couldn't get the statistically meaningful results with the limited number of samples, the average prediction errors were lower when the region segmentation was done by SOM rather than thresholding. The 3D visualization techniques such as isosurface construction and volume rendering were successfully implemented, by which we could nondestructively obtain the useful information of internal structures of peach.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.253-256
• /
• 1995

Polymers have been one of the emerging biomedical materials in the area of biomedical research which are applicable to the human body. For human applications, noninvasive characterization of the biomedical polymers has been one of the important topics, and is valuable information. Among others, the swelling rate is one of the important measurements needed for the hydrophilic polymers. NMR imaging has been a suitable method for the noninvasive study of such a material since it is sensitive to many physical and biochemical changes of the specimens. In addition, NMR techniques possess many useful intrinsic properties such as the relaxation and diffusion effects. The present study has provided a noble and noninvasive method of measuring the process of swelling as well as volumetric changes occurred in polymers and drug delivery processes in a drug delivery system (DDS) together with changes of released drug. This gives information, relating with both water ingress process, volumetric changes of polymer specimens and the visualization of sequential drug delivery process. Also, this study provides more reliable method to ascertain the time dependent swelling process compared to the conventional method. The important aspects is that the proposed method is truly noninvasive and is able to ascertain time dependent processes.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.225-234
• /
• 2011

This study proposes an inversion algorithm to extract the surface parameters, such as surface roughness and soil moisture contents, using multi-frequency SAR data. The study areas include the tidal flats of Jebu Island and the reclaimed lands of Hwaong district on the western coasts of the Korean peninsula. SAR data of three frequencies were accordingly calibrated to provide precise backscattering coefficients through absolute radiometric calibration. The root mean square (RMS) height and the correlation length, which can describe the surface roughness, were extracted from the backscattering coefficients using the inversion of the Integral Equation Method (IEM). The IEM model was appropriately modified to accommodate the environmental conditions of tidal flats. Volumetric soil moisture was also simultaneously extracted from the dielectric constant using the empirical model, which define the relations between volumetric soil moistures and dielectric constants. The results obtained from the proposed algorithm were verified with the in-situ measurements, and we confirmed that multi-frequency SAR observations combined with the surface scattering model for tidal flats can be used to quantitatively retrieve the geophysical surface parameters in tidal flats.

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.231-236
• /
• 2017

The present work addresses how to measure the amount of dissolved aluminum in phosphoric acid, based on volumetric and gravimetric measurements of the precipitates formed by reaction between the $H_3PO_4$ solution containing dissolved aluminum ions and 10 % KF solution. The volume of the precipitates increased with dilution of the dissolved aluminum-containing $H_3PO_4$ solution up to 1/4 dilution above which it decreased with further dilution. The lowered amounts of the precipitates at low dilution less than 1/4 and high dilution more than 1/4 are attributed to high acidity of the solution and decreased amount of dissolved aluminum in the solution, respectively. Volumetric measurement of the amount of precipitates was found not to be very reliable with the experiments, while weight measurement of the precipitates after drying for 80 min at $60^{\circ}C$ appeared to be very reproducible. In the present work, it is suggested that the amount of Al dissolved in 85 % $H_3PO_4$ solution can be calculated by multiplying 50 to the weight of precipitate obtained by reacting 8 ml of 1/4 diluted $H_3PO_4$ solution containing dissolved aluminum ions with 6 ml of 10 % KF solution.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.90-96
• /
• 1999

In contracts for sales of natural gas between sellers and buyers, it is not suncient to only measure a volumetric quantity of gas in flowing conditions in metering station. Therefore the measured volumetric quantity must be converted to that of reference conditions. The density of the natural gas required in such a calculation can be measured directly or estimated from the equation of sate or any other experimental methods. The specific gravity meter is the apparatus used to measure the density of fluids under the reference conditions and it can be widely used in industrial areas, especially in massive flow rate natural gas industry. This study has been carried out in an attempt to improve measurement accuracy of natural gas flow rate calculation, providing the adequate installation and proper operation conditions of specific gravity meter. The test results are 1) the density measurement errors in case of using methane and standard gas as calibration gases are smaller than using methane and nitrogen gas, 2) the periodical calibration to maintain accurate density measurements is essential, and 3) the specific gravity meter is sensitive to changes of environmental conditions, especially environmental temperature surrounding the specific gravity meter.