• 제목/요약/키워드: volume-up

검색결과 2,458건 처리시간 0.033초

20대 여성의 유방 부피 계측치에 따른 브래지어 컵의 분류 (A Study on the Classification of Brassiere Cups by Breast Volume Measurement Values on Women in their Twenties)

  • 박유신;김선미;김은란
    • 대한인간공학회지
    • /
    • 제23권2호
    • /
    • pp.93-104
    • /
    • 2004
  • The research subjects of this study were 30 unmarried Korean women from 20 to 29 who had never had an operation on their breast. Measurement method using plaster breast mold was used for measuring their volume of breast. The correlation between their breast volume and the methods to set up brassiere cups with the existing method and with their circumference of breast was analyzed using KendalI's Coefficient. which was to figure out a method which had a bigger correlation with the volume of breast between the method to set up brassiere cups using the existing method and the method using the circumference of breast. The results analyzed showed that the coefficient of correlation between the existing method and the volume of breast was .12 and the significance level was .45. They didn't have any correlation. On the other hand. the coefficient of correlation between the circumference of breast and the volume of breast was .82. which was very high values and the significance level was very high .0001. Therefore. it turned out that it was difficult to set up brassiere cups by using the existing method and it was easier and more reliable to set up the cups by using the circumference of breast.

작은 유방 여성을 위한 유방 볼륨업 패드의 비교 착의평가 (Comparative Evaluation of Wearing Breast Volume-up Pads for Small-Breasted Women)

  • 이경화
    • 패션비즈니스
    • /
    • 제26권3호
    • /
    • pp.72-86
    • /
    • 2022
  • Volume-up pads are the most common and easiest way to make women with small breasts beautiful. In this study, to develop a volume-up brassiere pad with excellent wearing effects and appearance, 24 different types of volume-up pads commercially available in the online market were investigated and then 11 types were purchased. Among these eleven types, four pads (PAD1, PAD2, PAD3, PAD4) with distinct shapes and materials were selected through a pre-test. They were compared to the newly developed pad for research (PAD5). The results of the study follow. The results of evaluating appearance when wearing the developed pad (PAD5) were significantly higher than that of other pads, and the appearance evaluation score for the full-cup type pad was excellent. In the wearing satisfaction evaluation result, PAD5 showed generally excellent evaluation scores, and in the case of the touch, preference for the fabric material was higher than that of the silicon pad. In the evaluation of motion adaptability, the developed PAD5 showed generally excellent evaluation scores in all movements, indicating that the full-cup type pads had better motion adaptability than the partial-type pads.

Time Course of Ventricular Remodeling after Atrial Septal Defect Closure in Adult Patients

  • Bae, Yo Han;Jang, Woo Sung;Kim, Jin Young;Kim, Yun Seok
    • Journal of Chest Surgery
    • /
    • 제54권1호
    • /
    • pp.45-52
    • /
    • 2021
  • Background: Atrial septal defect (ASD) is the most common congenital heart disease. However, the details of cardiac chamber remodeling after surgery are not well known, although this is an important issue that should be analyzed to understand long-term outcomes. Methods: Between November 2017 and January 2019, cardiac magnetic resonance imaging was performed preoperatively, at a 1-month postoperative follow-up, and at a 1-year postoperative follow-up. Cardiac chamber volume, valve regurgitation volume, and ejection fraction were measured as functions of time. Results: Thirteen patients (10 men and 3 women) were included. The median age at surgery was 51.4 years. The preoperative median ratio of flow in the pulmonary and systemic circulation was 2.3. The preoperative mean right ventricular (RV) end-diastolic volume index (EDVi) and RV end-systolic volume index (ESVi) had significantly decreased at the 1-month postoperative follow-up (p<0.001, p=0.001, respectively). The decrease in the RVEDVi (p=0.085) and RVESVi (p=0.023) continued until the postoperative 1-year follow-up, although the rate of decrease was slower. Tricuspid valve regurgitation had also decreased at the 1-month postoperative follow-up (p=0.022), and continued to decrease at a reduced rate (p=0.129). Although the RVEDVi and RVESVi improved after ASD closure, the RV volume parameters were still larger than the left ventricular (LV) volume parameters at the 1-year follow-up (RVEDVi vs. LVEDVi: p=0.016; RVESVi vs. LVESVi: p=0.001). Conclusion: Cardiac remodeling after ASD closure is common and mainly occurs in the early postoperative period. However, complete normalization does not occur.

환경영향평가시 도로소음 평가범위 설정에 대한 연구 (A Study for Assessment Scope Set-up of Road Noise in EIA)

  • 최준규;선효성;정태량
    • 환경영향평가
    • /
    • 제21권4호
    • /
    • pp.567-572
    • /
    • 2012
  • This paper suggests the set-up plan of the assessment scope in road noise considering road characteristics with the prediction model of road noise. The RLS90 prediction model with some assumptions is used to establish the assessment scope of road noise. The main contents of the applied assumptions are smooth drive of cars, flat region, location of all noise sources in one lane, drive in design speed, and set-up of assessment scope according to traffic volume and car speed. The information of traffic volume to predict road noise is obtained by the distribution of small cars and full-sized cars in road. In this study, the total traffic volume in road is computed by adding the number of small cars to the conversion number of small cars, which means the number of small cars making the same noise as one full-sized car. The prediction result of road noise with the influence factor of traffic volume, car speed, distance between road and receiver is presented. The resultant assessment scope of road noise is obtained by combining road noise prediction data with the set-up standard of road noise assessment scope.

직결형 회전교차로의 적용 가능성과 도입 기준에 관한 연구 (A Study on the Applicability and Introduction Standards of Cut-through Roundabouts)

  • 김주현;신언교;김준;권민영
    • 대한교통학회지
    • /
    • 제34권5호
    • /
    • pp.449-464
    • /
    • 2016
  • 본 연구의 목적은 혼잡 교차로에 직결형 회전교차로의 적용 가능성을 평가하고 적용 가능한 교통량 범위를 산정하여 도입기준을 마련하는데 있다. 이를 위해 진입 교통량 및 주 부도로 교통량 비율, 좌회전 교통량 비율에 따라 다양한 시나리오를 작성하고 직결형 회전교차로와 회전교차로, 신호교차로에 대한 시뮬레이션을 수행하여 지체시간을 비교 분석하였다. 분석 결과 주 부도로 교통량 비율이 6:4인 경우의 차로당 교통량이 400대/시에서는 좌회전 비율 30%까지, 500대/시에서는 20%까지, 600대/시에서는 10%까지 직결형 회전교차로의 지체시간이 가장 작게 나타났다. 주 부도로 비율이 7:3인 경우에는 차로당 교통량이 400-600대/시에는 6:4와 동일하게 나타났으나 300대/시의 좌회전 비율 30%, 700대/시인 경우의 10%에서 직결형 회전교차로가 가장 작게 나타났다. 주 부도로 비율 8:2인 경우에는 차로당 교통량이 400-500대/시, 700대/시인 경우에는 7:3과 동일하게 나타났으나 300대/시의 10-30%, 600대/시에는 좌회전 비율이 20% 인 경우에도 가장 작게 나타났다. 종합해보면 주 부도로의 교통량 비율 차이가 커질수록 좌회전 교통량 비율과 교통량이 적을수록 직결형 회전교차로의 교통 처리 능력이 높게 나타났다. 따라서 주 부도로 교통량 차이가 크고 주도로 직진교통량 비율이 큰 혼잡교차로에 직결형 회전교차로의 도입 시 효과가 클 것으로 기대된다.

공간 능력과 공간 기하적 사고에서 SketchUp활용의 효과 -중학교 1학년 입체도형의 측정 단원을 중심으로- (The impact of Google SketchUp on spatial ability and 3D geometric thinking of 7th grade students in volume measurement of solid figures)

  • 이현희;김래영
    • 한국수학교육학회지시리즈A:수학교육
    • /
    • 제52권4호
    • /
    • pp.531-547
    • /
    • 2013
  • The purpose of the study is to examine how effects of activities using Google SketchUp on students' spatial ability and 3D geometric thinking in measuring the volume of solid figures. By comparing the results from pre- and post-tests between the experimental group and control group, we found that activities using Google SketchUp help students improve their spatial ability in the spatial orientation and visualization. In addition, more than half students in the experimental group moved from level 4 up to level 7 in thinking process of measuring the volume in terms of Battista(2004)'s levels. This study suggests that the instruction with Google SketchUp can help to improve students' spatial ability and 3D geometric thinking in the regular class in middle school. In addition, SketchUp can be an advanced technological tool to support students' self-directed learning, which create an efficient educational environment and a great opportunity to learn geometry in an effective manner.

소아 전산화단층촬영에서 Volume Mode의 유용성 연구 (The Study of Effectiveness of Volume Mode in Pediatric CT)

  • 박연;김상현
    • 디지털융복합연구
    • /
    • 제12권10호
    • /
    • pp.425-431
    • /
    • 2014
  • 본 연구는 ATOM Phantom을 이용하여 선량, 화질을 비교 분석 하여 Volume mode의 유용성 밝혀 소아 CT 검사에 적극적으로 사용하기 위함이다. Helical mode Noise와 Volume mode의 Noise, HU, SNR은 p>0.05 이므로 통계적으로 유이한 차이가 없음을 알 수 있었다. 각 부위별 선량값은 모두 p>0.05 이므로 통계적 유이한 차이가 없었으나 DLP값이 Helical mode보다 Volume mode가 더 낮게 측정되었다. 유효선량 역시 Volume mode가 Helical mode 보다 낮음을 알 수 있었다. 정성적 분석에서는 Mode에 따른 조건 별로 각각 Helical: 2.6, 3.3, 4.36 Volume: 2.8, 3.64, 4.44, Mode별 Follow up 영상평가 결과로는 Helical mode가 3.8 Volume mode가 3.83점으로 큰 차이가 없는 것으로 나타났다. 5세 이하의 소아 CT검사에 있어서 640-MDCT Volume scan이 Helical mode와 비교해 낮은 선량으로 영상의 질이 큰 차이가 없기에 소아 CT 검사에는 유용 하다고 생각된다.

단계투기법에 의한 준설점토의 체적비 산정 (Estimation of volume Ratio according to Step up Filling Method for a Dredged Clay)

  • 이송;강명찬
    • 한국지반공학회논문집
    • /
    • 제16권1호
    • /
    • pp.167-178
    • /
    • 2000
  • 준설매립 공사시 자중압밀침하량 및 체적변화비 예측을 위해 사용되는 Yano 방법의 단점을 보완하고실제 준설매립 공사시 준설토가 연속적으로 투기되며 퇴적고의 상승이 토층의 증가와 침강 및 자중압밀에 의한 체적감소의 결과로 표현되어지는 것을 고려한 단계투기법에 의한 새로운 해석기법에 대한 시험적 연구를 수행하였다. 단계투기시험에 의해 투기속도와 퇴적고 상승속도의 관계를 측정하여 현장 매립계획고에 소요되는 현장투기 완료일수를 산정하였고 그때 소요되는 전체 투기높이 그리고 이에 해당하는 실질토량고를 산정하여 이를 바탕으로 현장투기완료 후 자중압밀 침하량 및 체적변화비,함수비, 간극비의 변화를 예측하였고, 전체투기 시험을 통한 Yano법에 의한 산정결과와 비교 분석하였다. 자중압밀 침하량의 경우 약 29.8%, 체적비의 경우 31.1%, 공극비 및 함수비가 약 40%정도 전체투기에 의한 Yano 법이 단계투기법에 의한 결과보다 작게 평가되었다.

  • PDF

활성오니법에 의한 오징어 가공공장 폐액처리중에 발생하는 슬러지의 소각재처리 (Burning Up of the Sludge occurred during Activated Sludge Treatment of Washing Wastewater and by-product Waste in Cuttlefish Processing Manufacture)

  • 조순영;서재수
    • 한국환경과학회지
    • /
    • 제4권2호
    • /
    • pp.195-220
    • /
    • 1995
  • A lot of sludges occur during an activated sludge treatment process of the washing wastewater and by-product waste in the cuttlefish processing manufacture. The sludges give also out a bad smell, and their amicable reclamation is very difficult because of the limited area of the filling-up. To reduce the heavy weight and large volume of the sludges, they was burning up. After the burning up at 350t for 2hrs the weight(volume) of the sludges were reduced to 5% level of the initial value. In contents of the bad heavy metals for human after the burning up, cadmium and lead metal were slightly detected, while mercury and the bad others not detected.

  • PDF