• 제목/요약/키워드: volume function model

검색결과 505건 처리시간 0.028초

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF

흰쥐에서 출혈성 쇼크 후 회복 시 저체온법 및 수액 치료에 따른 폐장의 염증성 변화 (Inflammatory Reponse of the Lung to Hypothermia and Fluid Therapy after Hemorrhagic Shock in Rats)

  • 장원채;범민선;정인석;홍영주;오봉석
    • Journal of Chest Surgery
    • /
    • 제39권12호
    • /
    • pp.879-890
    • /
    • 2006
  • 배경: 출혈성 쇼크는 허혈 시 발생하는 산소산화물 등에 의해 체내에 여러 가지 염증반응을 일으킴으로써 각 장기의 기능부전을 초래한다. 특히 폐장은 허혈 시 조기에 폐포 세포의 투과성이 증가하여 부종, 염증세포의 침윤 및 출혈 등이 일어나 호흡부전증을 초래한다. 또한 출혈성 쇼크 시 기본적으로 시행하는 수액 요법은 간질의 부종을 일으켜 폐장의 기능을 감소시킬 수 있는 위험 요소이다. 따라서 출혈성 쇼크 후 폐장의 기능 저하를 예방하기 위해서는 폐장의 염증 반응을 줄이고 폐부종을 최소화시키는 노력이 필요하다. 대상 및 방법: $300{\sim}350$ gm 정도의 수컷 흰쥐를 이용하여 경정맥을 통해 약 3 mL/100 g의 혈액을 제거하여 평균 경동맥압 $35{\sim}40$ mmHg의 출혈성 쇼크 상태(I단계, 60분)를 유도하고 유지한 후, 제거한 혈액을 재주입하고 수액요법을 실시하여 평균 경동맥압을 80 mmHg로 유지하는 소생 상태(II 단계, 60분)를 시행한 후 약 3시간 정도 경과를 관찰(III 단계)하였다. 실험동물은 3군으로 나누어 실험하였으며 I군(n=10)은 I 단계 시 직장체온을 $37{\pm}1^{\circ}C$로 유지하고 II 단계에서 린저액을 이용하여 수액요법을 실시하였다. II 군(n=10)은 I 단계 시 직장체온을 $33{\pm}1^{\circ}C$로 유지하고 II단계에서 린저액을 이용한 수액요법을 실시하였다. III군은 I단계 시 $33{\pm}1^{\circ}C$로 체온을 유지하였고 II 단계에서 5% 알부민액을 이용하여 수액요법을 실시하였다. 각 군 모두 실험 전, I, II, III 단계 후반에 혈류역학적 인자(심박수, 평균 경동맥압), 동맥혈 가스 분석, 혈청내 포도당과 LDH, I, II단계의 투여 수액양, 기관지-폐포 세척액의 Interleukin(IL)-8을 측정하였고, 조직검사를 통해 염증반응의 정도를 조직학적 점수로 평가하였다. 결과: I군의 4예를 제외한 26예가 III단계까지 생존하였다. 각 군 간의 평균 경동맥압의 유의한 차이는 없었다. 그러나 실험 1단계에서의 채혈량은 I군은 $3.2{\pm}0.5$ mL/100 g으로 II, III 군의 $3.9{\pm}0.8$ mL/100 g, $4.1{\pm}0.7$ mL/100 g에 비해 각각 유의하게 적었다(p< 0.05). II 단계에서의 투여 수액량은 I 군 $28.6{\pm}6.0$ mL, II 군 $20.6{\pm}4.0$ mL, III 군 $14.7{\pm}2.7$ mL로 각 군 간에 통계적인 유의성이 있었다(p<0.05). 혈청내 칼륨 농도는 I군에서 II군에 비해 소생술 후 의의 있게 높았으며(p<0.05), 포도당 농도는 II단계의 I군에서 타군과 비교하여 현저히 낮았다(p<0.05). IL-8은 I 군 $1,834{\pm}437$ pg/mL, II 군 $1,006{\pm}532$ pg/mL, III군 $764{\pm}302$ pg/mL로 I 군에서 II 및 III군과 비교하여 통계적으로 유의하게 높았으며(p<0.05), 폐조직의 조직검사를 통해 평가한 염증세포 분포 점수에서 III 군이 $1.6{\pm}0.6$으로 I 군 $2.8{\pm}1.2$에 비해 통계적으로 유의하게 낮았다(p<0.05). 결론: 압력 조절형 출혈성 쇼크 모델에서 시행한 저체온법은 정상체온을 유지하고 있는 군에 비해 쇼크 상태에서의 기초대사량을 줄여줌으로써 허혈에 의한 조직의 직접적인 손상을 억제할 수 있으리라 생각된다. 또한 저체온법은 수액의 사용량을 줄여주고 IL-8등의 싸이토카인 분비를 억제시키며 백혈구의 침윤을 줄여줌으로써 쇼크 후 폐장의 기능 회복에 도움을 준다. 그러나 저체온법을 시행한 군에서도 투여하는 수액을 달리함으로써 폐장의 염증변화나 손상이 차이를 나타낼 수 있을 것으로 생각되며 이에 대한 세심한 연구가 있어야 할 것이다.

인천지역에서 황사 기간 동안 대기 중의 바이러스 검출에 관한 연구 (Detection of Pathogenic Viruses in the Atmosphere during Asian Dust Events in Incheon City)

  • 박정웅;임영희;경선영;안창혁;이상표;정성환
    • Tuberculosis and Respiratory Diseases
    • /
    • 제59권3호
    • /
    • pp.279-285
    • /
    • 2005
  • 연구 배경 : 세계적으로 Asian dust로 알려져 있는 황사는 주로 봄철 중국과 몽고의 사막지역에서 발생하는 모래먼지로 수천 킬로미터를 이동하여 낙하하는 자연적으로 발생되는 대표적인 오염 물질이다. 한반도에 영향을 미치는 황사는 주로 $10{\mu}m$이하의 미세먼지($PM_{10}$)로서 $PM_{10}$의 증가는 황사현상의 증가와 매우 밀접한 관련이 있다. $PM_{10}$은 호흡기에 침착이 가능하고 따라서 호흡기 증상 및 폐기능에 영향을 미치는 것으로 알려져있으나 아직 이에 대한 병리기전의 연구는 미미하여 기존에 추정되는 $PM_{10}$의 병리기전 이외에 황사 먼지의 이동에 따르는 미생물의 전파, 특히 바이러스의 전파에 대한 연구는 임상적으로 의미가 있을 것으로 생각되며 황사시 바이러스 감염 질환 자체의 발생을 알아 보기위해 황사시 대기에서 시료를 채취하여 바이러스의 존재 유무에 대해 연구하였다. 방 법 : $PM_{10}$은 인천지역 10군데에서 측정하였으며 고용량 대기 포집기(HA 500F, Sibata, 일본)를 이용하여 하루에 한번씩 포집하였다. 공기포집기의 흡입용량인 500 L/min으로 6시간 시행하였다. 시료를 흡착하기 위하여 $0.25{\mu}m$ pore size의 지름이 110mm 인 Glass microfiber filter( Prefilter AP 15, 124mm)를 이용하였다. nfluenza virus, 구제역에 관계된 Piconaviridae의 Aphthovirus속인 RNA바이러스, Hog cholera virus 돼지콜레라 바이러스) 의 검출을 위해 수집한 membrane filter를 전처리하여 Polymerase chain reaction으로 바이러스를 확인하였다. 결 과 : 연구 기간 중 24시간 평균 $PM_{10}$수치는 황사 발생일에 $148.0{\mu}g/m^3$, 비황사발생일에 $57.0{\mu}g/m^3$ 로 차이를 보였다. 2003년과 2004년 4월부터 8월 사이에 채취한 시료에서 검출 대상 바이러스인 Influenza virus A, B, Hog cholera virus, 구제역에 관련된 Aphthovirus등은 검출되지 않았다. 결 론 : 연구는 연구기간 동안에 황사의 발생이 적어 충분한 연구가 되지 못하였으며, 또한 검출하고자 했던 바이러스질환의 발생도 적어 실제 황사와의 관련성을 규명하기에 적절한 연구가 이루어지질 못했다. 향후 황사 발생과 바이러스질환의 유행이 일치하는 시점에 좀더 광범위한 시료의 채취 방법으로 연구가 필요할 것으로 생각된다.

수온과 개체크기에 따른 양식산 미더덕, 흰멍게, 진주담치의 여수율 (Filtering Rate with Effect of Water Temperature and Size of Two Farming Ascidians Styela clava and S. plicata, and a Farming Mussel Mytilus edulis)

  • 김용술;문태석
    • 한국수산과학회지
    • /
    • 제31권2호
    • /
    • pp.272-277
    • /
    • 1998
  • 근년에 내만성 굴양식장의 생산성이 저하함에 따라 대체종으로 미더덕과 횐멍게가 주목되면서 이 종들의 생태적 지위가 기존의 양식굴과 상충되는지 여부를 알아보기 위한 일련의 조사계획의 하나로서 여수율을 조사하였으며, 조사결과와 Kim (1995)의 양식굴의 여수율 ($\ast$)을 비교 검토하였다. 1. 폐쇄계에서 해수수온 $10^{\circ}C,\;15^{\circ}C,\;20^{\circ}C,\;25^{\circ}C,\;29^{\circ}C$일때 시간에 따른 현탁색소의 제거율을 측정하고, Kim (1995)의 계산식을 사용하여 여수율을 계산하였다. 현탁색소는 neutral red를 사용하였으며, 22mm 흡수셀을 사용하여 440nm에서 초기흡광도 $0.25\~0.30$을 나타내는 농도를 사용하였다. 2. 여수율은 한시간동안 실험생물 1개체가 여수하는 양을 그 개체의 건조중량으로 나누어서 단위시간당 단위건조육중량당 여수량 (${\ell}/gDW/hr$)으로 산출하고, 이것이 개체 건조육중량과 수온에 의하여 받는 영향을 회귀경향식으로 해석하여, 종별 개체여수율 ($F,\;{\ell}/hr/animal$) 모형으로 다음과 같은 결과를 얻었다. 4. 종별로 수확시의 수온과 개체 평균중량 자료를 사용하여 연승 1대 (100m)당 집단 여수율을 계산한 결과는 다음과 같았다.

  • PDF

현실임분 생장특성에 의한 편백 임분수확표 개발 (Development of Stand Yield Table Based on Current Growth Characteristics of Chamaecyparis obtusa Stands)

  • 정수영;이광수;이호상;배은지;박준형;고치웅
    • 한국산림과학회지
    • /
    • 제109권4호
    • /
    • pp.477-483
    • /
    • 2020
  • 본 연구는 남부지방 대표수종인 편백 현실림의 생장 특성을 반영한 수확표를 작성하기 위하여 수행되었다. 200개소 이상의 편백의 표준지 생장조사 자료를 분석에 이용하였다. 기존의 임분수확표 작성 절차인 직경분포의 추정, 적합, 예측의 단계를 거쳤으며, 직경분포모델은 Weibull 함수를 이용하였다. 임지생산력을 평가하기 위한 기준인 지위지수(기준임령 30년)는 Chapman-Richards식을 이용하여 추정하였다. 임분수확표 작성을 위한 평균직경 등 여러 추정식은 적합도를 고려하여 최적의식을 선정하고 이용한 결과, 조사된 편백 현실임분의 지위지수는 10~18 범위에 있음이 밝혀졌다. 추정된 임분재적 모델은 편백림의 임분재적에 대해 62%의 설명력을 가지는 것으로 나타났다. 실재적과 추정재적 간의 잔차도분석 결과 '0'을 중심으로 모두 고른 잔차를 보여 본 추정 결과를 이용함은 문제가 없을 것으로 판단되었다. 이번 남부지방을 대표하는 침엽수인 편백에 대한 임분수확표 작성 결과가 현실의 산림경영에 폭넓게 사용되기를 바라며, 향후 편백 임분 생장이 더욱 안정화되고 생육발달로 장벌기 대경재 생산지가 많이 확보되면 더욱 개선된 수확표의 작성도 가능할 것으로 기대된다.