• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2017

SS(Suspended Solid) concentration by soil erosion into river at normal and flood season should be measured. However, to present the variation of SS due to various development project such as EIA(Environmental Impact Assessment), River Master Plan, and so on, it is necessary to estimate not measure SS, but there are not exist how to estimate SS. In the present study, therefore, we propose the hydrologic method of estimating SS concentration using the results of particular frequency flood discharge and sediment discharge by RUSLE method. SS consists of silty and clay soil and colloid particle etc. However, in the present study, silty and clay soils of sediment discharge except send set up SS standards. The flow discharge to estimate SS concentration are 1~2 years for normal season, 30~100 years for flood season. Meanwhile, analysis software for probable rainfall uses Fard2006, probable rainfalls under 2-year frequency are estimated using rainfall data and frequency factor of Gumbel distribution. The results of estimating SS concentration using runoff volume by sediment and flow discharges of silty and cray soils as above method show that reliable level of SS concentration is considered in predevelopment of natural condition and under development of barren condition. Especially, SS concentration takes notice that the value of sediment discharge makes a huge difference according to channel slope, it was confirmed that the value obtained by dividing the SS concentration by the channel slope is relatively constant even though the topographical factors are different. Therefore, if the present study will be proceeded for various watersheds, it will be developed as estimation method of SS concentration.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.1-36
• /
• 2000

Periodic markets of the later Choson dynasty had undergone fundamental changes during the late Chosun dynasty and Japanese colony period. This paper aims to analyse the spatial distributions and changes of the periodic markets in the middle stream of Han-River in this era in the use of the survey of documentary records and fieldwork. Before the early 1910s, long distance transportation was made by riverboats, short distance transportation was done by porters and pack animals. Because goods such as rice, soybean and salt were very heavy and needed long distance transport, they were mainly transported by riverboats. Accordingly, riverports on the shore of river played important roles in exporting and importing goods as nodes of long distance transportation. The opening of railroad Seoul-Busan, the construction of new roads(Sinjakno) of 1910s and the use of oxcarts produced striking changes in the spatial distribution and hierarchy structure of periodic markets. These changes also had influence on the outflow and inflow of goods in the middle stream of Han-River. In the parr of outflow of goods, it seems that the line linking Icheon city-Yongin city-Anseong city played a role in making the boundaries of the marketing areas between goods trams ported by the rail road Seoul-Busan and goods done by Han River river boats. Anseong, Osan and Suwon periodic markets located around railroad stations occupied the higher positions than those of other regions in the hierarchial structure of periodic markets. Their marketing areas could nearly overwhelm those of riverports located in the middle stream region of Han River and extend to the middle stream region of Han River as a result of decrease of transport cost through using of oxcarts and railroads. the opening of railroad Suwon-Yeoju(Suryoson) and railroad Cheonan-Janghawon(Cheonjangson) brought about changes of the structure of long distance trade again. In a part of outflow of goods, it seems that as a result of the new opening of their railroads periodic markets around railroads seized a large portion of the marketing area of the southern part of Yoju and Ichon area and therefore made extreme change in rivershipping of Han River. In the inflow part of goods, goods transported by riverboats from the downstream of Han River before the opening of railroad were imported directly from railroad stations. Accordingly, rivershipping and riverports declined. And because goods were imported by way of great periodic markets and supplied to small periodic markets and consumers before the opening of railroad, but supplied from railroad stations to small periodic markets and consumers after the opening of railroad. The volume of turnover of such great periodic markets as Anseong, Osan and Suwon periodic markets therefore declined. On the other hand, because Yangpyong area had not been yet included within the sphere of influence of railroad until 1930s, it heavily depended on rivershipping of Han River as before. But the opening of railroad Seoul-Wonju(jungangson) brought about decline of rivershipping in Yangpyong and Wonju area.

• Radiation Oncology Journal
• /
• v.25 no.4
• /
• pp.219-226
• /
• 2007

Purpose: The aim of this retrospective analysis was to analyze the results of radiotherapy administered to patients with neck node metastases from an unknown primary cancer, with or without neck dissection. Materials and Methods: From January 1986 to December 2005, 88 patients with neck node metastases from an unknown primary cancer were treated with curative intent. The age of the patients ranged from 35 to 74 years (median age, 59 years). There were 74 male and 14 female patients. Distribution of patients by N status was as follows: N1, 4 patients; N2a, 10 patients; N2b, 48 patients; N2c, 8 patients; N3, 18 patients. Fifty-one patients underwent neck dissection and 37 patients had only a biopsy (31 patients had fine-needle aspiration and 6 patients had an excisional biopsy). All patients received radiotherapy. The follow-up time ranged from 1 to 154 months, with a median time of 32 months. Results: The overall survival (OS) and disease-free survival (DFS) rate at 5 years were 43.9% and 41.7%, respectively. The factors associated with the OS rate were neck dissection, and a subsequent primary tumor. Factors associated with the DFS rate were N stage, neck dissection, and a subsequent primary tumor. Neck failure was noted in 15 patients, distant metastases in 18 patients, and a subsequent primary tumor in 8 patients. Conclusion: With comprehensive radiotherapy given to the bilateral neck and the potential mucosal sites, good survival rates can be obtained in patients with neck node metastases from an unknown primary cancer. However, considering the side effects, a randomized trial is required to determine the optimal radiotherapy volume.

• Journal of Veterinary Clinics
• /
• v.23 no.2
• /
• pp.114-118
• /
• 2006

A study on bioavailability and pharmacokinetics of florfenicol was conducted in broilers following a single intravenous (i.v.) and oral (p.o.) doses of 20 mg/kg body weight (b.w.). Florfenicol concentrations in plasma were determined by a high-performance liquid chromatography/mass spectrometry. Plasma concentration-time data after i.v. administration were analyzed by a non-compartmental analysis. Following i.v. injection, the total body clearance was $0.74{\pm}0.25L/kg/h$ and the volume of distribution at steady-state was $1.16{\pm}0.19L/kg$. Florfenicol was rapidly distributed and eliminated following i.v. injection with $1.15{\pm}1.06h$ of elimination half-life. After oral administration, the calculated $C_{max}$ values ($8.18{\pm}0.97{\mu}g/mL$) were reached at $1.33{\pm}0.29h$ in broilers. The elimination half-life of florfenicol was $1.31{\pm}0.27h$ and the absolute bioavailability (F) was 75.46% after oral administration of florfenicol. Florfenicol amine, a major metabolite of florfenicol, was detected in all broilers after i.v. and p.o. administration of florfenicol. The observed $C_{max}$ values of florfenicol amine ($3.96{\pm}2.60\;and\;2.22{\pm}1.71{\mu}g/mL$) were reached at $0.16{\pm}0.19\;and\;1.61{\pm}1.02h$ after i.v. and p.o. administration of florfenicol, respectively. Florfenicol amine was eliminated with $1.88{\pm}0.39\;and\;2.64{\pm}1.39h$ of the elimination half-life after i.v. and p.o. administration of florfenicol, respectively.

• Journal of the Korean association of regional geographers
• /
• v.2 no.1
• /
• pp.133-150
• /
• 1996

This study is to clarify the market cycle of travelling merchants and the spatial behavior of consumer's commodity purchasing. its reasons and purchasing region of each commodity in Chongsan of Chongsan Myun(village) periodic markets, that is one of the lowest central places in Okchon county. The data used are the results of interviews with 58 travelling merchants on June 22 and July 17, 1994, and questionaire survey taken to parents of students of Chongsan middle school of Chongsan Myun in Okchon county. Study area is typical agricultural regions taking the role of central places to provide rural service and is comparatively important periodic markets. Some of findings are summarized as follows: (1) Until 1980's. appearance of closed periodic markets is caused by the population decrease in rural region, income increase, and rising of living level according to the Five Years Planning of Economic Development, appearance of chain stores of agricultural co-coperative and of supermarkets,. changes in distribution mechanisim by increasing consignment volume of agricultural products through agricultural co-coperative, and the development of transportation in Okchon county. These, too, became the reasons for the decline of the Chongsan periodic markets in Okchon county. (2) Most of the travelling merchants visiting the Chongsan periodic markets are in their 50's of age, and they sell the miscellaneous commodities and agricultural products. And about one-fourths of travelling merchants reside in regions with periodic markets and in Okchon of higher order central places. (3) Travelling routes visting periodic markets can be simplified to five types. Major types of travelling routes are Chongsan periodic market$\rightarrow$Wonnam$\rightarrow$Boun, and Chongsan periodic market$\rightarrow$Yungdong$\rightarrow$Yongsan. The patterns of travelling merchants visiting periodic markets are classified into the type of everyday visiting of periodic markets over three days of five days from merchant's residence to market, and the type of merchants or consumers visiting one day's of five days. On days that travelling merchants don't visit periodic markets they purchase the commodities in Seoul, Taejon and Chongju. (4) Consumers who use periodic markets are from thirties to fifties years of age and most of them are employed in agriculture. Consumers visit periodic markets on foot or by bus, and visit two or three times in a month, and mainly purchase the commodities for one or two hours from about ten o'clock in the morning. (5) Consumers purchase the necessaries of life in periodic markets, and other commodities are purchased in Taejon city, Youngdong, and Boun Eup(town). But consumers purchase the goods(convenience goods, shopping goods, and specialied goods) largerly in Chongsan, because additional expense and disadvantage after service with poor transportation service for purchased goods in others regions. Therefore, the hierarchies of central places by the consumer's purchasing behaviour can not be seem in dewellers in Chongsan and Chongseong Myun.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.170-175
• /
• 1980

A mass production of chestnut necessiates the development of economic long-term storage method. The main objective of this study was to confirm the technical aspect of the chestnut storage method which was developed by two year project and to review the method of commercial application. The chestnut used for the experiments were separated in brine $(5.5{\sim}6.0^{\circ}\:B{\acute{a}}ume)$ into matured and unmatured lots and fumigated with $CS_2$ at a 5 $lb/27\;m^3$ level for $25{\sim}30\;hrs.$ The chestnuts were packed in wooden boxes with sawdust (50% moisture) in the ratio of 1 : 1 by volume. The boxes were stored in the cold room $(1{\pm}1^{\circ}C,\;85{\sim}95%\;RH)$ and the cellar ($0{\sim}10^{\circ}C$, controlled only by circulating night cool air). The results obtained were as follows: 1. Fully matured chestnut could be successfully preserved $8{\sim}9\;months$ at a l0% decay level in the cold room and $4{\sim}5\;months$ months in cellar. 2. Immatured chestnuts wire inferior to the matured in storage stability. At the maximum storage period, its storage life was two months shorter. 3. The heat transfer equation of piled chestnuts with sawdust can be suggested as $T_{\infty}-T_0=(T_{\infty}-T_0){\cdot}10^{-t/320}$ and j and $f_h$ values were 1 and 320 min, respectively. 4. The chestnuts in the package of storage unit had longer shelf life than naked chestnut during the retail distribution at ambient temperature.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.383-403
• /
• 1999

This study was performed to investigate the immunohistochemical and ultrastructural characterization of the choline acetyltransferase (ChAT)-immunoreactive nerve cells in the diagonal band of Broca of the rat basal forebrains, utilizing techniques of immunohistochemical and immunocytochemical microscopy. The ChAT-immunoreactivities were shown within neuronal cell bodies and processes by the light micoscope. According to cell shape and ratio of long axis vs short axis of cell body, the ChAT-immunoreaclive nerve cells in both vertical and horizontal limbs of the diagonal band of Broca were classified into 6 types. at the light microscopic level; round, oval, elongated, fusiform, triangular and polygonal types. As a result of the electron microscopic observation, the ChAT-immunoreactivated products appeared on the outer nuclear envelope, membranes of rough endoplasmic reticula (rER), free ribosomes and polysomes. Each cell type was subdivided into subtype I and II according to the several criteria such as volume of cell body, nuclear size relative to the cytoplasm, kinds and distribution of cell organelles and numbers and sorts of synapses. The subtype I of immnunoreactive nerve cells had large cell body and a small nucleus showing shallow indentations of nuclear evelope. In this subtype I with abundant cytoplasm, rER were well differentiated. Their long cisternae were parallelly ditributed and lamellated. One or two lamellar bodies and nematosomes were observed. The subtype II cell had small cell body and a large nucleus with deep indentations of nuclear envelope. In this subtype II with small cytoplasm, the rER were irregularly distributed and the lamellar body and nematosome were not found. A few axosomatic synapses in the subtype I and II were shown to be symmetric or asymmetric. The ratios of the symmetric synapse to the asymmetric one were investigated to be 1 : 2 and 1 : 4 in the subtype I and II, respectively. The axodendritic ones were almost asymmetric. But, the fusiform and triangular immunoreactive nerve cells were shown only to be subtype I. According to observations in this study, it is considered that the ultrastructural characterization in the 2 subtypes of each cell type may reflect the differences of the metabolic activities and projecting distances to the target cells.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.255-264
• /
• 2009

To evaluate the effects of chemical pretreatments of lignocellulosic biomass on enzymatic hydrolysis process, Populus euramericana was pretreated for 1 hr with 1% sulfuric acid ($H_2SO_4$) at $150^{\circ}C$ and 1% sodium hydroxide (NaOH) at $160^{\circ}C$, respectively. Before the enzymatic hydrolysis, each pretreated sample was subjected to drying process and thus finally divided into four subgroups; dried or non-dried acid pretreated samples and dried or non-dried alkali pretreated samples and chemical and physical properties of them were analyzed. Biomass degradation by acid pretreatment was determined to 6% higher compared to alkali pretreatment. By the action of acid ca. 24.5% of biomass was dissolved into solution, while alkali degraded ca. 18.6% of biomass. However, reverse results were observed in delignification rates, in which alkali pretreatment released 2% more lignin fragment from biomass to the solution than acid pretreatment. Unexpectedly, samples after both pretreatments were determined to somewhat higher crystallinity than untreated samples. This result may be explained by selective disrupture of amorphous region in cellulose during pretreatments, thus the cellulose crystallinity seems to be accumulated in the pretreated samples. SEM images revealed that pretreated samples showed relative rough and partly cracked surfaces due to the decomposition of components, but the image of acid pretreated samples which were dried was similar to that of the control. In pore size distribution, dried acid pretreated samples were similar to the control, while that in alkali pretreated samples was gradually increased as pore diameter increased. The pore volume which increased by acid pretreatment rapidly decreased by drying process. Alkali pretreatment was much more effective on enzymatic digestibility than acid pretreatment. The sample after alkali pretreatment was enzymatically hydrolyzed up to 45.8%, while only 26.9% of acid pretreated sample was digested at the same condition. The high digestibility of the sample was also influenced to the yields of monomeric sugars during enzymatic hydrolysis. In addition, drying process of pretreated samples affected detrimentally not only to digestibility but also to the yields of monomeric sugars.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.45
• /
• pp.191-238
• /
• 2010

The purpose of this paper is to make research on the trend of the worldwide medical device market, the trend of the medical device market in the major foreign countries, the present status of the medical device industry in Korea and Gangwon area, the present status of export competitive power and the SWOT analysis of competitive power of the medical device industry in Gangwon area, and the strengthening methods of export competitive power of the medical device industry in Gangwon area. As the research method, the questionaire for the strengthening of export competitive power of the medical device industry in Gangwon area was carried out from August 13 to Otober 22, 2009. The worldwide medical device market in 2008 is estimated at USD 210.2 billion, with the United States being the largest market, followed closely by Japan and Western Europe. In 2006, the worldwide export amount of medical devices recorded USD 121.1 billion and the worldwide import amount of medical devices recorded USD 126.3 billion. As of the end of 2008, the number of Korea's medical device manufacturers expanded to 1,726. The production amount of Korea's medical device industry in 2008 recorded 2,525 billion won, and the domestic market volume of medical devices in 2008 recorded 3,618 billion won. Korea's export amount of medical devices in 2008 recorded USD 1,132 million and recorded a 9.67% growth compared to the previous year, and the import amount of medical devices recorded USD 2,123 million and recorded a 1.43% reduction compared to the previous year. As of the end of 2008, the number of Gangwon area's medical device manufacturers expanded to 81. The production amount of Gangwon area's medical industry in 2008 recorded 380 billion won, and Gangwon area's export amount of medical devices recorded USD 269 million and recorded a 0.25% reduction compared to the previous year, and the import amount of medical devices recorded USD 3 million and recorded a 39.63% reduction compared to the previous year. According to the result analysis of the questionaire for the strengthening of export competitive power of medical device industry in Gangwon area(August 13~October 22, 2009), the competing country of the export medical device is the United States being the highest ranking. Comparing to the collective competitive power level 100 of the competing country, the collective competitive level of the export medical device is 60 below and 70-80 below being the highest ranking. Comparing to the quality level 100 of the United States, EU and Japan, the quality level of the export medical device is 80-90 below being the highest ranking. Comparing to the design level 100 of the United States, EU and Japan, the design level of the export medical device is 90-100 below being the highest ranking. Comparing to the technology level 100 of the United States, EU and Japan, the technology level of the export medical device is 80-90 below being the highest ranking. According to the SWOT analysis of competitive power of medical device industry in Gangwon area, the strength is the abundant expert manpower of the medical device in Wonju area. The weakness is the fragility of the brand recognition of the medical device industry. The opportunity is the demand increase of the new medical device owing to the advanced age of population. The threat is the difficulty of entry into overseas market owing to the request of the new specification certification of the medical device. In order to strengthen the export competitive power of the medical device industry in Gangwon area, the following measures should be taken by the government, local self-government body, related organization and medical device industry : the development of new technology and design, the enhancement of brand recognition. the acquisition of the foreign specification certification, the building of overseas distribution channel and after sales service channel, the positive participation in overseas medical device exhibition and opening of medical device exhibition, the training of expert manpower, the strengthening of overseas marketing, and the application of FTA and the establishment of counter measures against FTA. In conclusion, the medical device industry in Gangwon area has the difficulty in the entry into the overseas market owing to the shortage of overseas marketing capability. Therefore, the government and local self-government body should make the intensive and systematical support for overseas marketing of the medical device industry. For the support of overseas marketing, the government and local self-government body should provide positively the support of expenses for the acquisition of foreign specification certification, the support of participation in the overseas medical device exhibition, the despatch of market development mission, the increase of the support amount for R&D investment fund, and the training of expert manpower of medical devices.