• 한국해양공학회지
• /
• 제5권2호
• /
• pp.198-198
• /
• 1991

Not only difference of fatigue crack growth and propagation behavior resulted from the grain size, the hardness ratio and volume fraction in M.E.F. dual phase steel composed of martensite in hard phase and ferrite in soft phase, but also the effects of the plastic constraint were investigated by fracture mechanics and microstructural method. The main results obtained are as follows: 1) The fatigue endurance of M.E.F. steel increases with decreasing the grain size, increasing the ratio of hardness and volume fraction. 2) The initiation of slip and crack occures faster as the stress level goes higher. These phenomena result from the plastic constraint effect of the second phase. 3) The crack propagation rate in the constant stress level is faster as the grain size gets larger, the ratio of hardness lower and volume fraction smaller.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.85-91
• /
• 2009

W/C and unit volume, which significantly affect quality of concrete related to strength and durability, are regulated at below $185kg/m^3$ for regular concrete generally used in standard specification for constructions. The aim of this research is to develop chemical admixture and find out its potential use by identifying characteristics of admixtures added to soft concrete and hardening concrete, of which content ratio of component for each type of admixtures is subject to change in accordance with unit volume within KS' allowable range. Sodium gluconate, polyoxyethylene nonylphenyl ether, poly carboxylic copolymer in slump, which is characteristic of soft concrete, are deemed highly sensitive while there is no air entrainment except for $10\sim70%$ in WE, WR component content ratio and NP. In hardening concrete, strength in general showed higher action in compressive strength and tensile strength than in plain strength. Use of proper AE agent and AE water reducing agent at the same time is deemed to be used as chemical admixtures capable of manufacturing high-quality, high-quantity concrete.

• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.443-448
• /
• 2006

For development of an on-line monitoring unit of fermentation process, an auto dilution unit based on traditional chemical and biological analytical method was developed and the performance was evaluated. The dilution unit was constructed with two syringe pumps and flow direction change valves and fully automated. Total delivery volume of two pumps using distilled water was measured to confirm the operating stability And diluted concentrations of three substrate solutions (glucose, lactic acid, ethanol) were compared with a standard method with a high performance liquid chromatograph (glucose, lactic acid) and gas chromatograph (ethanol). Relative error values of total delivery volume of the pumps were below 3% and standard deviation values were 0.003 (n=5). Relative error values of diluted concentration of the dilution unit measurements were below 2% with 1/10 of dilution ratio and 70, $80{\mu}{\ell}$ of sample volume conditions for glucose and lactic acid, 1/30 of dilution ratio and $70{\mu}{\ell}$ of sample volume conditions for ethanol, respectively. In case of the ethanol, cause of the evaporative characteristics, the relative error values showed over 5% whole experimental conditions.

• Journal of Chest Surgery
• /
• 제29권8호
• /
• pp.867-874
• /
• 1996

이 연구는 대동맥판역류증이 있으면서 좌심실수축말기용적(left ventricular end-systolic volullle)이 커져있는 환자에서 수술전 좌심실 최고수축기압수축말기용적비(left ventricular peak systolic presslle/end-systolic volume ratio)를 판막치환후의 증상적 호전 판단의 자료로서의 적용 여부를 검토하기위한 것이 다 대상은 중정도 이상의 대돈맥판역류증이 있고다른 심혈관계의 이상이 없으면서 좌심실수축말기용적이 60mm2 넘는 21명(남 15, 여 6, 15까에서 60세가지 연령 분포)이었다. 이들을 대상으로 심도자시 통 상적으로 측정하는 여러 변수와 판막치환후 증상적 호전과의 관계에 대해서 분석하였다. 수술 6개월후 증세의 호전이 13명(62%)의 환자에서 있었고, 8명(38%)에서는 증세의 변화가 없었다. 복합변수분석을 통해서 좌심실최고수축기압$\boxUl$수축말기 용적 비는 통계적으로 유의하게 수술 a개월후의 기능적분류상태(p=0.005)와 수술전에 비해 수술 6개월후 기능적분류상태의 변화 정도(p=0.032)를 판단 하는 지표임을 나타냈었다. 판막치환 6개월후 비가 1.71 mmHg/ml/m2 이상되는 모든 환자는 기능상태 I 혹은 II를 유지한 반면 비가 1.71 mmHg ml/m2 미만인 환자에서는 40%가 기능적분류상태 III이 있다. 좌심실 수축말기 용적이 60 ml/m2 이상 커져 있는 대동맥 판역류증 환자에서 좌심실최고수축기 압1수축 말기용적비는 판막치환후의 증상적 호전을 예측하는 지표로 사용될 수 있다.

• 설비공학논문집
• /
• 제25권6호
• /
• pp.317-323
• /
• 2013

A multi-perforated tube indicates the existence of multiple holes of various shapes on the surface of a long cylinder-type or rectangular tube, and a hole installed on the surface is called an orifice, as it is relatively small in size, compared with the surface area of the tube. In this study, the flow characteristics of a circular multi-perforated tube with many orifices on the surface were investigated experimentally and numerically. The volume flowrate issuing from each orifice, discharge angle, effective flow area ratio, and the flow fields around the orifices were measured and visualized, with the variation of the orifice area ratio, at the same blockage ratio. The volume flowrate distributions along the flow direction of the multi-perforated tube tends to be more uniform, as larger orifices were positioned at the inlet side of the multi-perforated tube, compared with no orifice area change along the flow direction.

• 한국조경학회지
• /
• 제40권4호
• /
• pp.1-17
• /
• 2012

본 연구는 서울시 아파트단지의 시기별 녹지배치구조와 식재구조의 변화과정을 분석하여 보다 친환경적인 아파트단지 내 녹지조성 개선방안을 제시하고자 하였다. 연구대상지는 서울시에 조성된 아파트단지 중 조성시기, 용적률, 지하주차장에 의한 지반현황, 녹지율의 차이가 뚜렷한 아파트단지 12개소를 선정하였다. 연구대상지 유형화는 시기별로 녹지율과 지반현황을 기준으로 녹지율이 높은(40% 이상) 자연지반 아파트, 녹지율이 낮은(40% 미만) 자연지반 아파트, 녹지율이 낮은(40% 미만) 인공지반 아파트, 녹지율이 높은(40% 이상) 인공지반 아파트 네 가지로 구분하였다. 아파트단지 녹지배치 구조의 가장 근원적 변화요인은 녹지율과 인공지반 여부로 용적률이 상승하면서 주차장 면적비율도 높아져 상대적으로 녹지율은 낮아졌다. 녹지배치구조가 가장 많이 변한 녹지유형은 전면녹지와 완충녹지로 전면녹지는 녹지율이 높은 자연지반 아파트의 평균 녹지 폭 10.0m에서 3.5m, 2.7m, 4.5m로 시기별로 축소 변화하였다. 완충녹지는 녹지율이 높은 자연지반 아파트에서 평균 녹지 폭 15.0m로 단지외곽 경계부를 연결하였으나, 녹지율이 낮은 인공지반 아파트에서 주차장 확대로 평균 녹지 폭이 7.7m, 2.7m로 점차 축소되고 일부 구간은 단절되었으나, 2001년 이후 녹지에 대한 인식변화로 다시 평균 녹지 폭이 3.8m로 넓어지면서 연결되었다. 녹량 변화를 살펴보면, 녹지율이 높은 자연지반 아파트 녹지용적계수가 $1.27m^3/m^2$이었고, 식재밀도가 높아지면서 녹지율이 낮은 자연지반 아파트의 녹지용적계수가 $3.47m^3/m^2$로 가장 높았다. 반면에 녹지율이 높은 인공지반 아파트의 녹지용적계수는 $0.72m^3/m^2$로 매우 낮은 상태이었다. 식재밀도는 교목 아교목층의 경우 5.0주/$100m^2$에서 14.5주/$100m^2$로 증가하였다. 아파트단지 녹지를 보다 친환경적이고 기능적으로 조성하기 위한 방안으로 녹지율 40% 이상의 아파트단지 내 전면녹지는 녹지 폭 4.5m 이상으로 확대하여 정원개념의 경관 식재지로 조성하고, 후면녹지는 녹지 폭 5.0m이상으로 확대하고 복층구조로 식재하여 녹지량을 증진하는 것을 제시하였다. 측면녹지는 수고가 높은 수종을 식재하여 벽면 차폐와 녹음기능을 증진하고, 완충녹지는 자생수종을 자연림에 가까운 다층구조로 조성하는 생태적 배식기법을 적용하면서 단지내부녹지와 연결해야 할 것으로 판단되었다.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.54-61
• /
• 2015

본 연구에서는 공정 플랜트시설의 설비 밀집정도에 따른 폭발크기의 경향을 파악하기 위해 CFD 해석을 수행하였다. 설비의 밀집정도는 VBR(Volume Blockage Ratio)과 장애물의 평균크기로 단순화하였다. 밀집정도에 따른 이상적인 형태의 공간에 대해 폭발전용해석 코드인 FLACS를 이용하여 폭발의 특성을 파악하였다. 해석결과 VBR과 장애물의 수가 증가할수록 폭발압력은 증가하는 경향을 보였다. 장애물의 개수가 25개 이하에서는 VBR의 영향은 크지 않았다. 본 연구의 결과 공정에서 가연성 가스 누출 사고시 설비혼잡도를 고려한 피해저감 설계의 기초자료로 활용될 수 있을 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.45-50
• /
• 2004

In this study, we processed two procedures of application test of filler for special-purpose utility that are new application methods of aerated concrete and properties test of aerated concrete according to mixing ratio because we investigated the better use of aerated concrete as filler for fireproof safety and we proposed basic data about standardization of mixing of aerated concrete. We measured flow and volume change of aerated concrete. And if its volume doesn't change, we added measuring unit weight and compressive strength. To test application of aerated concrete as filler for fireproof safety, we filled up aerated concrete to fireproof safety according to suitable mixing ratio. Then we measured maximum temperature of inner part of fireproof safety in accordance with the standard test of fireproof. According to the results, aerated concrete as filler for fireproof safety could be possibly used. So when we make aerated concrete, we should consider using an adding agent as well as a foaming agent.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.1-8
• /
• 2006

In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch in the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Dynamic simulations of the influence of white water usage ratio and uncoated broke addition ratio on the variation of process variable was monitored as a function of time. Results from the dynamic simulations showed that the volume of reservoirs affected the dynamic behavior of the process. The dynamic behavior of flow rate and dissolved starch concentration in process units were different from each other. The speed of the change of dissolved starch concentration in process units was depend on the starting point of the change of dissolved starch concentration, the length of circulation loop, and the volume of reservoirs.

• Computers and Concrete
• /
• 제26권1호
• /
• pp.31-52
• /
• 2020

This paper investigates the size dependent effect on the vibration analysis of a porous nanocomposite viscoelastic plate reinforced by functionally graded-single walled carbon nanotubes (FG-SWCNTs) by considering nonlocal strain gradient theory. Therefore, using energy method and Hamilton's principle, the equations of motion are derived. In this article, the effects of nonlocal parameter, aspect ratio, strain gradient parameter, volume fraction of carbon nanotubes (CNTs), damping coefficient, porosity coefficient, and temperature change on the natural frequency are perused. The innovation of this paper is to compare the effectiveness of each mentioned parameters individually on the free vibrations of this plate and to represent the appropriate value for each parameter to achieve an ideal nanocomposite plate that minimizes vibration. The results are verified with those referenced in the paper. The results illustrate that the effect of damping coefficient on the increase of natural frequency is significantly higher than the other parameters effect, and the effects of the strain gradient parameter and nonlocal parameter on the natural frequency increase are less than damping coefficient effect, respectively. Furthermore, the results indicate that the natural frequency decreases with a rise in the nonlocal parameter, aspect ratio and temperature change. Also, the natural frequency increases with a rise in the strain gradient parameter and CNTs volume fraction. This study can be used for optimizing the industrial and medical designs, such as automotive industry, aerospace engineering and water purification system, by considering ideal properties for the nanocomposite plate.