• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.91-99
• /
• 2023

Participation in power trading using surplus power is considered a business model active in the domestic energy trade market, but it is limited only if the legal requirements according to the type, capacity, and use of the facilities to be applied for are satisfied. The hydrogen residential demonstration model presented in this paper includes solar power, energy storage system (ESS), fuel cell, and water electrolysis facilities in electrical facilities for private use with low-voltage power receiving system. The concept of operations strategy for this model focuses on securing the energy self-sufficiency ratio of the entire system, securing economic feasibility through the optimal operation module installed in the energy management system (EMS), and securing the stability of the internal power balancing issue during the stand-alone mode. An electric facility configuration method of a hydrogen residential complex demonstrated to achieve this operational goal has a structure in which individual energy sources are electrically connected to the main bus, and ESS is also directly connected to the main bus instead of a renewable connection type to perform charging/discharging operation for energy balancing management in the complex. If surplus power exists after scheduling, participation in power trading through reverse transmission parallel operation can be considered to solve the energy balancing problem and ensure profitability. Consequentially, this paper reviews the legal regulations on participation in electric power trading using surplus power from hydrogen residential models that can produce and consume power, gas, and thermal energy including hybrid distributed power sources, and suggests action plans.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.491-496
• /
• 2023

As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 ℃ The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.

• 한국의학물리학회지:의학물리
• /
• 제11권2호
• /
• pp.123-130
• /
• 2000

전리계의 성능은 방사선 선량측정의 정확도와 정밀도에 직접적으로 영향을 준다. 본 연구에서는 전리계의 성능을 유지하기 위한 정도관리의 항목들을 제시하고 구체적인 성능검사를 시행하고자 한다. 선정된 성능평가 항목들은 적절한 인가전압, 예열 및 고전압 후의 평형시간, 누설에 의한 상쇄 전류, 방사선 측정 전후의 영점이동 (배경전류), 장시간 안정성, 선형성, 외부조건의 영향 등이었다. 전리계에 연결된 자루가 단단한 전리함과 방사선원으로 스트론티움-90이 내장된 검사기가 성능검사용으로 이용되었다. 인가전압의 측정은 전리함의 입력단자에서 직접 측정하였고 평형시간의 측정은 전리계에 전원을 연결한 후와 인가전압을 바꾼 후 검사기에 연결된 전리함의 반응이 안정을 가져오는 시간으로 측정하였다. 누설은 전리계가 안정된 후 방사선을 조사하지 않은 상태에서 전리계의 측정값이 영점에서 이동하는 것으로 나타냈으며 배경전류는 안정된 전리계의 영점을 조정하고 전리계에 연결된 검사기에서 전리함을 10분 조사한 후 영점의 변화로 나타냈다. 장시간의 안정성 3개월에 걸쳐 측정되었으며 이때 검사기의 측정값을 온도-기압에 대한 보정을 한 후 그 값을 비교하였다. 선형성은 전리계에 연결된 전리함을 n번 연속하여 조사하여 그 전체의 측정값과 초기값을 n번 곱한 값을 비교하였다. 외부조건의 영향은 인위적으로 외부온도를 17-34 $^{\circ}C$ 로 변화시켜서 환경변화에 의한 전리계의 영점이동으로 나타냈다. 인가전압의 측정에서 명목상의 인가전압 300, 500V에 대한 측정값은 각각 2.5%와 5.8% 작게 나타났다. 전원을 연결한 후 전리계가 실제로 평형에 도달하는 시간은 20분으로 이는 전리계의 안정성 표시기보다 9분 지연되었으며 인가전압을 바꾼 경우에는 1분 이내에 평형에 도달하였다. 전리계의 누설의 측정에서 영점의 이동은 0.002(스케일)/15분이었고 10분 조사 후 영점의 이동은 발견되지 않았다. 전리계는 3개월 동안 99.4%의 안정성을 유지하였다. 스케일 영역 0.000-9.991 에서 전리계의 선형성에서의 이탈은 0.9% 이었다. 온도 범위 17 - 34 $^{\circ}C$ 에서 전리계의 영점이동은 0.2% 이내였다. 본 연구에서는 임상에서 사용하고 있는 전리계에 대한 성능을 평가하는 항목을 제시하고 이를 전리계의 정도관리에 이용하도록 하였다. 이러한 프로그램의 운용을 통하여 전리계에 의한 오차를 줄임으로써 방사선측정에서의 정확도와 정밀도를 향상시킬 수 있을 것으로 사료된다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• 전기화학회지
• /
• 제19권3호
• /
• pp.80-86
• /
• 2016

리튬이온 이차전지의 고용량화를 위해 high-Ni계 양극 활물질이 크게 주목받고 있으나, Ni 함량이 높아짐에 따라 고온 안정성이 감소하여 수명저하가 발생하게 된다. 본 연구에서는 $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ (NCM622)의 합성공정 중에서 전구체인 전이금속 수산화물과 리튬염의 열처리 과정에 알루미나 입자를 첨가함으로써 추가적인 표면처리 공정없이 활물질 특성을 개선시키고자 하였다. 알루미나를 첨가하게 되면 고온 사이클 수명이 개선되었으며, 특히 나노크기의 알루미나를 사용하는 경우에 초기용량의 감소도 적고 수명도 개선됨을 확인하였다. 그리고, 나노 알루미나를 함량별로 추가한 결과로 표면형상이 점차 변화함과 동시에 격자상수의 감소가 발생하는 것이 관찰되어 표면코팅과 구조 내 치환이 동시에 발생하고 있음을 확인하였다. LSTA (linear-sweep thermmametry)를 사용하여 알루미나의 함량이 증가할 수록 부반응이 감소하며 고온 안정성이 증가하는 것을 확인하였다. 또한 전이금속 대비 Al을 2.5 mol% 추가하는 경우에 가장 우수한 고온 사이클 성능이 나타나는 것을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.89.1-89.1
• /
• 2010

Since Gratzel and co-workers developed a new type of solar cell based on the nanocrystalline $TiO_2$ electrode, dye-sensitized solar cells (DSSCs) have attracted considerable attention on account of their high solar energy-to-conversion efficiencies (11%), their easy manufacturing process with low cost production compared to conventional p-n junction solar cells. The mechanism of DSSC is based on the injection of electrons from the photoexcited dye into the conduction band of nanocrystalline $TiO_2$. The oxidized dye is reduced by the hole injection process from either the hole counter or electrolyte. Thus, the electronic structures, such as HOMO, LUMO, and HOMO-LUMO gap, of dye molecule in DSSC are deeply related to the electron transfer by photoexcitation and redox potential. To date, high performance and good stability of DSSC based on Ru-dyes as a photosensitizer had been widely addressed in the literatures. DSSC with Ru-bipyridyl complexes (N3 and N719), and the black ruthenium dye have achieved power conversion efficiencies up to 11.2% and 10.4%, respectively. However, the Ru-dyes are facing the problem of manufacturing costs and environmental issues. In order to obtain even cheaper photosensitizers for DSSC, metal-free organic photosensitizers are strongly desired. Metal-free organic dyes offer superior molar extinction coefficients, low cost, and a diversity of molecular structures, compared to conventional Ru-dyes. Recently, novel photosensitizers such as coumarin, merocyanine, cyanine, indoline, hemicyanine, triphenylamine, dialkylaniline, bis(dimethylfluorenyl)-aminophenyl, phenothiazine, tetrahydroquinoline, and carbazole based dyes have achieved solar-to-electrical power conversion efficiencies up to 5-9%. On the other hand, organic dye molecules have large ${\pi}$-conjugated planner structures which would bring out strong molecular stacking in their solid-state and poor solubility in their media. It was well known that the molecular stacking of organic dyes could reduce the electron transfer pathway in opto-electronic devices, significantly. In this paper, we have studied on synthesis and characterization of dendritic organic dyes with different number of electron acceptor/anchoring moieties in the end of dendrimer. The photovoltaic performances and the incident photon-to-current (IPCE) of these dyes were measured to evaluate the effects of the dendritic strucuture on the open-circuit voltage and the short-circuit current.

• 한국전자통신학회논문지
• /
• 제15권1호
• /
• pp.71-78
• /
• 2020

신재생에너지를 활용한 발전원의 경우, 날씨 등의 영향을 많이 받아 전력 생산량이 원활하지 않을 수 있다. 태양광 및 풍력 발전의 효율성을 높이기 위해 에너지 저장 장치(ESS·Energy Storage System)를 활용한다. ESS는 배터리 보호 시스템과 운영관리, 제어체제가 미흡하거나, 설치상의 부주의 등의 원인으로 인해 화재가 속출하고 있으며, 매우 큰 인명 피해와 경제적 손실로 이어지고 있어 ESS의 안정성 및 배터리 보호 시스템 운영관리 기술이 필수적으로 요구되고 있다. 본 논문에서는 ESS 최적화 및 안정적인 운영을 위한 배터리 잔량 산출 알고리즘과 고장 예측 알고리즘을 제시한다. 제시한 알고리즘은 배터리의 충전 및 방전 수행 시 실시간으로 전류량을 누적하여 정확한 배터리 잔량을 산출하며, 배터리 셀 간의 전압불균형 현상을 이용하여 배터리의 고장 유무를 산출한다. 제시된 알고리즘들은 ESS를 최적의 상태로 운영하는데 필요한 정확한 배터리 잔량과 고장 예측이 가능하다. 따라서 ESS의 배터리의 정확한 상태 정보를 측정하고 신뢰성 있게 모니터링 하여 대형 사고를 미연에 방지할 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.406-406
• /
• 2016

To get high efficiency n-type crystalline silicon solar cells, passivation is one of the key factor. Tunnel oxide (SiO2) reduce surface recombination as a passivation layer and it does not constrict the majority carrier flow. In this work, the passivation quality enhanced by different chemical solution such as HNO3, H2SO4:H2O2 and DI-water to make thin tunnel oxide layer on n-type crystalline silicon wafer and changes of characteristics by subsequent annealing process and firing process after phosphorus doped amorphous silicon (a-Si:H) deposition. The tunneling of carrier through oxide layer is checked through I-V measurement when the voltage is from -1 V to 1 V and interface state density also be calculated about $1{\times}1012cm-2eV-1$ using MIS (Metal-Insulator-Semiconductor) structure . Tunnel oxide produced by 68 wt% HNO3 for 5 min on $100^{\circ}C$, H2SO4:H2O2 for 5 min on $100^{\circ}C$ and DI-water for 60 min on $95^{\circ}C$. The oxide layer is measured thickness about 1.4~2.2 nm by spectral ellipsometry (SE) and properties as passivation layer by QSSPC (Quasi-Steady-state Photo Conductance). Tunnel oxide layer is capped with phosphorus doped amorphous silicon on both sides and additional annealing process improve lifetime from $3.25{\mu}s$ to $397{\mu}s$ and implied Voc from 544 mV to 690 mV after P-doped a-Si deposition, respectively. It will be expected that amorphous silicon is changed to poly silicon phase. Furthermore, lifetime and implied Voc were recovered by forming gas annealing (FGA) after firing process from $192{\mu}s$ to $786{\mu}s$. It is shown that the tunnel oxide layer is thermally stable.

• 한국재료학회지
• /
• 제4권1호
• /
• pp.3-8
• /
• 1994

최근 중요하게 된 진동 흡수를 위해서 $BaTiO_{3}$ 세라믹의 흡진 특성을 측정하고 미세구조와의 연관을 조사했다.$BaTiO_{3}$ 세라믹은 비교적 물리적 화학적으로 안정하여 좋은 흡진재로 기대된다.BaTiO$_{3}$ 세라믹은 흡진 특성을 강화시키기 위해서 섬유상 분말을 소결하여 만들었다. KDC법으로 직경이 0.2$\mu\textrm{m}$, 1.2$\mu\textrm{m}$, 2.0$\mu\textrm{m}$인 각각 다른 섬유상 $K_2Ti_4O_9$을 만들고 이온교환해서 섬유상 $BaTiO_{3}$ 을 만들었다. 면상으로 배향시킨 소결체의 흡진 특성과 전기적 물성을 조사하여 미세구조와 의 관계를 밝혔다. 소결체의 입경과 등가회로, 전기기계합계수($K_{t}$), 발생 전압(V)을 조사한 결과, 사용한 섬유의 직경이 클수록 소결체의 입경은 작아졌다. 따라서 입계가 많아졌다. 흡진 특성은 입계가 많을수록 커진다. 즉 입계의 내무마찰이 클수록 흡진률은 커지며 이때의 내부마찰은 등가회로를 조사함으로써 확인되었다.

• 한국환경과학회지
• /
• 제19권8호
• /
• pp.951-960
• /
• 2010

Sediment works as a resource for electric cells. This paper was designed in order to verify how sediment cells work with anodic material such as metal and carbon fiber. As known quite well, sediment under sea, rivers or streams provides a furbished environment for generating electrons via some electron transfer mechanism within specific microbial population or corrosive oxidation on the metal surfaces in the presence of oxygen or water molecules. We experimented with one type of sediment cell using different anodic material so as to attain prolonged, maximum electric power. Iron, Zinc, aluminum, copper, zinc/copper, and graphite felt were tested for anodes. Also, combined type of anodes-metal embedded in the graphite fiber matrix-was experimented for better performances. The results show that the combined type of anodes exhibited sustainable electricity production for ca. 600 h with max. $0.57\;W/m^2$ Al/Graphite. Meanwhile, graphite-only electrodes produced max. $0.11\;W/m^2$ along with quite stationary electric output, and for a zinc electrode, in which the electricity generated was not stable with time, therefore resulting in relatively sharp drop in that after 100 h or so, the maximum power density was $0.64\;W/m^2$. It was observed that the corrosive reaction rates in the metal electrodes might be varied, so that strength and stability in the electric performances(voltage and current density) could be affected by them. In addition to that, COD(chemical oxygen demand) of the sediment of the cell system was reduced by 17.5~36.7% in 600 h, which implied that the organic matter in the sediment would be partially converted into non-COD substances, that is, would suggest a way for decontamination of the aged, anaerobic sediment as well. The pH reduction for all electrodes could be a sign of organic acid production due to complicated chemical changes in the sediment.