• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.583-585
• /
• 2002

The effects of phosphor properties such as the granular sizes and shape on the crosssectional shape of phosphor layer and plasma discharge characteristics for improving the luminance and luminous efficiency in ac PDP have been investigated. As the granular size decreases, the thickness of vertical side of barrier rib in blue cell decreases, and wheras the thickness of bottom side increases due to increased dispersibility. In addition, the phosphor with round granular shape showing good dispersibility shows better voltage margin and higher luminous efficiency due to their improved discharge volume and packing density.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.768-776
• /
• 2014

Using a simplified high-frequency small-signal equivalent circuit model for BSIM3 MOSFET, the fully differential two-stage folded-cascode CMOS operational amplifier is analyzed to obtain its small-signal voltage transfer function. As a result, the expressions for dc gain, five zero frequencies, five pole frequencies, unity-gain frequency, and phase margin are derived for op amp design using design equations. Then the analysis result is verified through the comparison with Spice simulations of both a high speed op amp and a low power op amp designed for the $0.13{\mu}m$ CMOS process.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.7
• /
• pp.341-348
• /
• 2002

Recently, an SVC(Static Var Compensator) was installed at Seo-daegu substation in order to maintain the voltage level and reserve stability margin of the Korean Power System. This paper deals with the development of the simulation model for the Seo-daegu SVC. As a simulation platform, PSCAD/EMTDC is adopted and library components for the SVC are developed. The model includes detailed control system functions of Seo-daegu SVC. In order to verify the developed model, simulation results are compared with the TNA test performed by ABB. The results show a good agreement of the developed model with the real system.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.911-914
• /
• 1998

This paper presents an algorithm that evaluates the transfer capability of composite power systems using probabilistic approaches. The reliability indices calculated by using probabilistic method are expected maximal flow, expected transfer capability margin, and expected power not supplied. In this paper, a successive linear programming technique is used to evaluate transfer capability named maximal flow. Physical constraints considered in the maximal flow problem are the limits of toad voltage, line overloading, and real & reactive power generation. Numerical results on IEEE RTS show that the proposed algorithm is effective and useful.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.19.1-19.1
• /
• 2009

Phase change random access memory (PRAM)은 large sensing signal margin, fast programming speed, low operation voltage, high speed operation, good data retention, high scalability등을 가지는 가장 유망한 차세대 비휘발성 메모리이다. 현재 PRAM용 상변화 재료로는 주로 Ge2Sb2Te5가 사용되고 있지만 reset 전류가 높고 reliability 가 좋지 않아서 새로운 상변화 물질 연구가 필요하다. AgInSbTe (AIST)는 GST와 더불어 열에 의한 가역적 상변화를 하는 소재로 광기록 매체에서는 기록 속도가 빠르고 동작 특성이 우수하다는 특징이 있다. 본 연구에서는 XRD, 비저항측정등을 통해 온도에 따른 AIST의 물성 및 결정화 특성을 분석하고 나노 소자제작을 통해 그 전기적 특성을 평가하였다.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.253-263
• /
• 2006

A high performance and low cost single switch current fed energy recovery circuit (ERC) for an alternating current (AC) plasma display panel (PDP) is proposed. Since it is composed of only one power switch compared with the conventional circuit consisting of four power switches and two large energy recovery capacitors, the ERC features a simpler structure and lower cost. Furthermore, since all power switches can be switched under soft switching operating conditions, the proposed circuit has desirable merits such as increased reliability and low switching loss. Specifically, there are no serious voltage notches across the PDP with the aid of gas discharge current compensation, which can greatly reduce the current stress of all inverter switches, and provide those switches with the turn on timing margin. To confirm the validity of proposed circuit, its operation and performance were verified on a prototype for 7-inch test PDP.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.781-788
• /
• 2011

This paper proposes a boost-input self-driven active clamp ZVS converter eliminating the extra dirve circuit for the active clamp switch. The converter used the auxiliary winding of the transformer to drive the active clamp switch and to achieve asymmetrical duty control. This paper presents the operation principle and the analyzed results of dynamic characteristics including steady state characteristics of the converter proposed. The experimental results were used to verify the theoretical predictions. A 300W (15V/20A) prototype converter that only exhibited 2-turn winding number in the auxiliary winding was sufficient to drive the active clamp switch on the input voltage of 80V. Finally, the maximum efficiency of 91.2% was achieved for the prototype converter and the proposed converter had stable closed loop characteristic with phase margin $55^{\circ}$.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.171-173
• /
• 2004

This paper presents the selection of optimal placement for STATCOM (Static synchronous Compensator) which is one of the FACTS (Flexible Alternating Current Transmission System) devices, considering line contingency. Line contingency ranking is gotten by using sensitivity of load margin. According to line contingency ranking line contingency was considered. And IOP (Index for selecting optimal Placement of STATCOM) is calculated by the variation of each bus's reactive mum for several line contingencies. The bus where has the biggest value of lOP is the most optimal placement to install STATCOM for voltage stability. IPLAN is used to program this part which get IOP. This study is carried out on the modified IEEE14 Bus Test System to confirm the efficiency of the method.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.76-78
• /
• 2004

본 논문에서는 전력시스템에서 상정 사고로 인해서 부하가 급변할 때 계통의 신뢰도를 유지하기 위해서 발전 모선의 전압을 조절하여 부하 모선의 전압을 정상상태의 범위에서 유지시키기 위한 알고리즘을 구조개편 후 비상시에 취할 수 있는 중요한 조치 중 하나로서 재조명한파. 이에 먼저 전력 계통의 상태를 발전기의 예비력을 기준으로 정상상태와 비상상태로 나누고, 계통에서 발생한 상정사고에 대하여 발전 모선의 전압변동을 통해서 부하 모선의 전압을 정상상태의 범위에서 유지하도록 한다. 하지만 심각한 상정사고가 발생하여 발전기의 출력이 정상상태의 예비력 기준을 초과하여 발전을 해야만 하는 상황이면, 이를 계통의 비상상태로 선언하고, 이를 다시 정상상태로 회복시킬 수 있도록 하는 새로운 알고리즘을 제안하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.121-127
• /
• 2016

We propose a algorithm to calculate power factor of fundamental waveform in an environment where the voltage and current have been distorted by harmonics. In the proposed power factor computation algorithm, voltage and current are converted to rotating DQ reference frame, and power factor is calculated from active power and reactive power. We compare the proposed method with the conventional power factor measurement method as mathematically. In a condition that voltage and current are distorted by harmonics, the proposed method accurately measure the power factor of fundamental wave, and it is confirmed by simulation using MATLAB. If the proposed power factor measurement method is applied to an automatic power factor control system, a power factor compensation performance can be maximized in harmonic distortion environment. As a result, it is possible to reduce electricity prices, reduce line loss, increase load capacity, ensure the transmission margin capacity, and reduce the amount of power generation.