• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.655-659
• /
• 2005

The environment. of electric railway has, included both fast and slow load variation, which may occur in the office or maintenance factory or running electric train. This paper investigated flicker indices according to voltage fluctuations on three different situations; The base office in new subway in the daytime and night time, inside of electric train running in conventional subway. And also the variations of harmonic frequencies(2nd, 3rd, 5th) with rime were measured at the same time. Flicker index is a good tool for evaluating the voltage fluctuation quantitatively and show some relationship with even harmonic frequencies produced by the voltage fluctuation when the electric train is running on the railway.

• 조명전기설비학회논문지
• /
• 제21권10호
• /
• pp.35-39
• /
• 2007

저압 배전계통에서 사용되는 가전제품에 의해 발생되는 전압변동 및 플리커현상을 관리하기 위해 유럽에서는 IEC 기준에 표준화된 시험방법을 규정하고 있다. 본 시험에서는 플리커의 제한치산출시 저압계통의 기준임피던스를 사용하고 있다. 그러나 IEC 기준의 기준임피던스는 230[V]/50[Hz]를 사용하는 저압 배전계통의 임피던스로 국내 저압 배전계통에 그 값을 직접 적용하는 것은 변압기 임피던스, 저압선 경간, 인입선 거리가 상이하기 때문에 불합리하다. 따라서 본 논문에서는 경제성과 확률이론을 바탕으로 국내 단상2선식(1P2W) 저압계통의 기준임피던스를 산정하였으며, 본 연구결과를 기준임피던스로 IEC TR 60725 Ed2에 게재하였다.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1163-1168
• /
• 2009

The power quality of wind energy becomes more and more important in connecting wind-farms to the grid, especially weak grid. This paper presents the simulation of a wind farm of a permanent magnet synchronous generator (PMSG) and a doubly fed induction generator (DFIG). Flicker mitigation is performed by using PMSG as a static synchronous compensator (STATCOM) to regulate the voltage at the point of common coupling (PCC). A benefit of the measure is that integrating two function of to control the active power flow and to reduce the voltage flicker in a wind farm. Simulation results show that controlling PMSG is an effective and economic measure in reducing the flicker during continuous operation of grid connected wind turbines regardless of short circuit capacity ratio, turbulence intensity and grid impedance angle.

• 한국전기전자재료학회논문지
• /
• 제27권4호
• /
• pp.262-267
• /
• 2014

This study describes that light flicker of LED lamp is improved by placing an AC-powered LED block in each phase of three-phase AC power. Rectified current is considered as an instantaneous luminous flux because the current flowing through the LED block is proportional to the amount of light emitted by the LED block. Percent flicker is calculated simply by modeling the rectified current flowing through the LED block to a triangular wave current. Percent flicker is 100% in single-phase AC powered LED lamp. Percent flicker of the same level as that in an incandescent lamp (6%~14%) is however, achieved if light emission starts before $40^{\circ}$ in each voltage phase of three-phase AC power.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.225-228
• /
• 2001

We simulated and analyzed the flicker phenomena in the poly-Si TFT-LCD using PSpice for the development of wide-area and high-quality LCD display We define the electric quantity of flicker in the TFT-LCD, which is the ratio of half frame frequency (30Hz) to DC (0 Hz) frequency. We compared two different types of TFTs, excimer laser annealed (ELA) poly-Si TFT and silicide mediated crystallization (SMC) poly-Si TFT, and found that the ELA and SMC TFTs show different flicker characteristics because of their mobility and leakage current. In addition, we showed that the gate voltage should be chosen carefully at the minimum flicker because of the larger leakage current of poly-Si Tn as compared with a-Si TFT

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1240-1246
• /
• 2006

일반적으로 전동차 보조전원장치의 출력전원 품질에 영향을 주는 주된 요인으로는 짧은 시간동안의 진폭변조로 인한 전압플리커 현상과 전동차 내부의 공기압축기 및 냉난방 환기장치 등 대용량 전동기의 반복적인 구동 등을 들 수 있다. 본 연구는 전동차내의 형광등의 전원과 관련된 플리커 현상에 대해 내장재 개조 후 형광등 32W와 개조 전 40W를 입력전원(AC220V)의 변동에 따른 광 출력(밝기) 로서 계측 비교하였다. 또한, 전압변동을 유발하는 부하변동의 주된 요인을 파악하기 위해 전동차 운행시간과 운행밀도를 고려하여 플리커 현상을 분석하였다. 연구결과, 개조 후 형광등 32W에 비해 40W 형광등이 입력전원의 변화에 대해 육안인식정도 측면에서는 20.26% 정도 덜 민감하게 반응함을 알 수 있었으며, 심한 플리커가 일어나는 전압의 경우도 19.9%로 더 낮게 측정되었다. 또한, 운행차량의 부하변동 영향에 있어서는 주로 영업차량의 운행밀도가 높고, 이용승객이 많은 혼합시간대에 보조전원장치(SIV)의 출력전압 변동으로 인한 객실형광등 플리커가 발생된다는 사실을 확인할 수 있었다. 더불어, 전동차 이용승객이 육안으로 형광등의 깜박임을 민감하게 느낄 수 있는 가능 주파수대역으로서 $8Hz{\sim}15Hz$ 임을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.153-160
• /
• 2006

This paper presents a new compensating system, which consists of a shunt active filter and passive components for mitigating voltage and current disturbances arising from an Electric Arc Furnace (EAF). A novel control strategy is presented for the shunt active filter. An extended method based on instantaneous power theory in a rotating reference frame is developed for extraction of compensating signals. Since voltages at the point of common coupling contain low frequency interharmonics, conventional methods cannot be used for dc voltage regulation. Therefore, a new method is introduced for this purpose. The passive components limit the fast variations of load currents and mitigate voltage notching at the Point of Common Coupling (PCC). A three-phase electric arc furnace model is used to show power quality improvement through reactive power and harmonic compensation by a shunt active filter using the proposed control method. The system performance is investigated by simulation, which shows improvement in power quality indices such as flicker severity index.

• 대한전자공학회논문지SD
• /
• 제40권1호
• /
• pp.20-28
• /
• 2003

In this paper, we present results of the comparative analysis of the flicker phenomena in the poly-Si TFT-LCD and a-Si:H TFT-LCD arrays for the development and manufacturing of wide-area and high-quality TFT-LCD displays. We used four different types of TFTs; a-Si:H TFT, excimer laser annealed (ELA) poly-Si TFT, silicide mediated crystallization (SMC) poly-Si TFT, and counter-doped lateral body terminal (LBT), poly-Si TFT. We defined the electrical quantity of the flicker so that we could compare the flickers quantitatively for four different 40" UXGA TFT-LCDs. We identify three factors contributing to the flicker, such as charging time, kickback voltage and leakage current, and analyze how much each of three factors give rise to the flincker in the different TFT-LCD arrays. In addition, we suggest and show that, in the case of the poly-Si TFT-LCD arrays, the low-level (minimum) gate voltages should be carefully chosen to minimize the flicker because of their larger leakage currents compared with a-Si TFT-LCD arrays.

• 조명전기설비학회논문지
• /
• 제21권10호
• /
• pp.150-158
• /
• 2007

규모가 큰 제철소는 전기로를 포함한 시간에 따라 변하는 비선형 부하를 가지고 있다. 이들 비선형 부하는 고조파 전류를 발생시키고, 전력계통의 전압을 왜곡시킨다. 플리커는 전압 변동의 크기에 따라 램프의 방출 변화에 의한 인간의 지각 효과로 정의된다. SVC의 주 목적은 공통결합점에서 전압을 한계값 이하로 유지하는데 있다. 본 논문에서는 SVC 투입 전후의 고조파와 플리커 저감 효과를 분석하고, IEC 61000-3-6과 IEC 61000-3-7에 의해 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.205-207
• /
• 2004

This paper proposes a new SSHG(Sag/swell and Harmonic Generator) injecting voltage by using series inverter. The proposed SSHG composes series inverter, DC capacitor as energy storage, rectifier and voltage clamp circuit. This SSHG is designed to generate typical power disturbances, such as voltage sag/swell, over/under voltage and voltage flicker. Also it is designed to generate unexpected voltage phase jumping waveform by controlling the series inverter. In this paper, three kinds of control methods for the proposed 2MVA SSHG are given. Typical voltage sag and swell waveforms are implemented by adopting simple control method. Also the voltage flicker is generated by changing the amplitude of the injected voltage in random. Owing to the limited bandwith of the proposed SSHG, high frequency transient waveforms can be obtained by using the open loop control. The simulation and experimental results are given to verify the operation of the proposed SSHG, Finally, conclusions are given.