• Advances in aircraft and spacecraft science
• /
• 제6권4호
• /
• pp.273-282
• /
• 2019

This article is concerned with the investigation of geometrically non-linear vibration response of refined thick porous nanobeams. To this end, non-local theory of elasticity has been adopted to provide the nanobeam formulation. Voids or pores can affect the material characteristics of the nanobeam. So, their effects have been considered in this research and also there are various void distributions. The closed form solution of the non-linear problem has been used that is adopted from previous articles. Then, it is focused on the impacts of non-local field, void distribution, void amount and geometrical properties on non-linear vibrational characteristic of a nano-size beam.

• 한국지반공학회논문집
• /
• 제21권2호
• /
• pp.17-26
• /
• 2005

함수특성곡선은 불포화지반에서의 해석과 물성 추정 등에 반드시 고려해야 하는 지반의 고유 특성이다. 하지만 기존의 실험장비에 의한 실험 중에 발생되는 시료의 부피변화는 함수특성곡선 결과에 영향을 비치게 된다. 따라서 본 연구에서는 함수특성곡선 실험 중에 발생되는 부피변화를 측정하여 보다 정확한 함수특성곡선을 얻고자 하였다. 그리고 실험과정 중에 관측된 간극비의 변화를 통해 실험 초기의 포화과정이 시료의 구조를 변화시키고 있음을 알 수 있었다. 따라서 본 연구에서는 기존의 설험방법으로 실험을 수행한 시료에 대해 실험 초기의 포화과정을 생략한 실험을 수행하여 간극비의 변화가 상대적으로 크게 감소하는 것을 알 수 있었으며, 그 결과들을 비교, 분석하였다.

• 소성∙가공
• /
• 제22권5호
• /
• pp.269-274
• /
• 2013

Experiments and numerical simulations of the incremental upsetting test were carried out to investigate void closure behavior and mechanical characteristic of a 1.5wt%C ultra-high carbon steel. The experimental results showed that the voids become quickly smaller as the reduction ratio increases. The simulation results confirmed this behavior and indicated that the voids were completely closed at a reduction ratio of about 40~45% during incremental upsetting. After the completion of the incremental upsetting tests, the process of diffusion bonding was employed to heal the closed voids in the deformed specimens. To check the appropriate temperature for diffusion bonding, deformed specimens were kept at 800, 900, 1000 and $1100^{\circ}C$ for an hour. In order to investigate the effect of holding time for diffusion bonding at $1100^{\circ}C$, specimens were kept at 10, 20, 30, 40, 50 and 60minutes in the furnace. A distinction between closed and healed voids was clearly established using microstructural observations. In addition, subsequent tensile tests demonstrated that complete healing of a closed void was achieved for diffusion bonding temperatures in the range $900{\sim}1100^{\circ}C$ with a holding time larger than 1 hour.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.568-571
• /
• 2004

This research estimated the physical. mechanical characteristic and the character of sound absorption according to target void ratio of porous concrete and the mixing ratio of recycled aggregate for the valid utilization of recycled aggregate using waste concrete and sound reduction out of a road, a railway, a residential street, and a downtown area. As a result of the test, compressive strength tended to be a radical strength fall when target void ratio was $25\%$ and contents of recycled aggregate exceeded over $50\%$. Also, the character of sound absorption of porous concrete which used recycled aggregate using waste concrete was the most excellent when target void ratio was $25\%$, and the influence by contents of recycled aggregate was trivial. Therefore, when the strength and the character of sound absorption of porous concrete are considered, it is proved valid that proper target void ratio was $25\%$ and contents of recycled aggregate using waste concrete was $50\%$ or so.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.146-153
• /
• 2004

The goals of this study are to investigate the feasibility of the reference state approach in determining the generalized soil-water characteristic curve that is essential for characterization of unsaturated soil behavior. The soil-water characteristic curves are obtained from a number of specimens of fine-grained residual soils compacted with different void ratios. Based on the experimental test results, the feasibility of using the liquid limit state as the reference state for predicting the soil-water characteristic curve are verified. Finally, through the regression analysis of experimental data using the equation of Fredlund and Xing (1994), a reliable method is proposed to predict the generalized soil-water characteristic curve of fine-grained residual soils using the liquid limit state as the reference.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1629-1638
• /
• 1990

Using a 1/10 scale model pump, which is designed and manufactured to simulate two phase performance of reactor coolant pump of Y.G.N

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.425-428
• /
• 2008

교량 바닥판은 공용기간 동안 차량하중 및 외부 열화환경(동결융해, 우수, 융빙제)에 직접적으로 노출되어 있어 교량의 주요 부재 중 가장 많은 결함이 발생되는 부위이다. 따라서, 콘크리트 교량 바닥판의 열화원인을 분석하고 향후 손상방지 및 품질향상 대책을 수립하고자, 고속도로 상에 공용 중인 교량 바닥판 중 19개소에 대해 콘크리트 코어를 채취하고, 콘크리트에 대한 공극특성 분석을 실시하였다. 실험결과, 손상이 발생된 교량 바닥판의 경우, 공기량이 기준치에 미달하거나, 기준치를 만족하는 경우에도 기포간격계수가 외국의 기준에 미치지 못하여 내구성이 저하된 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제33권4호
• /
• pp.409-422
• /
• 2001

The dynamic character of a system of the governing differential equations for the one- dimensional two-fluid model, where the momentum flux parameters are employed to consider the velocity and void fraction distribution in a flow channel, is investigated. In response to a perturbation in the form of a＇traveling wave, a linear stability analysis is peformed for the governing differential equations. The expression for the growth factor as a function of wave number and various flow parameters is analytically derived. It provides the necessary and sufficient conditions for the stability of the one-dimensional two-fluid model in terms of momentum flux parameters. It is demonstrated that the one-dimensional two-fluid model employing the physical momentum flux parameters for the whole range of dispersed flow regime, which are determined from the simplified velocity and void fraction profiles constructed from the available experimental data and $C_{o}$ correlation, is stable to the linear perturbations in all wave-lengths. As the basic form of the governing differential equations for the conventional one-dimensional two-fluid model is mathematically ill posed, it is suggested that the velocity and void distributions should be properly accounted for in the one-dimensional two-fluid model by use of momentum flux parameters.s.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.652-654
• /
• 1993

In this paper, time variation properties of acoustic emission pulse were studied from low density polyethylene by using the self developed measuring system of aucoustic emission. When AC 15[kVrms] were applied to specimen of needle shape voids(0.5, 1.0, 1.5, 2.0[mm]), the breakdown time of void specimen was quite shorter than that of non-void specimen, thus the quick accurance of inception discharge were confirmed. It is observed that the skewness of the phase angle for applied voltage distribution phase, the average pulse of amplitude and the number of pulse are characteristic quantity of discharge.

• Steel and Composite Structures
• /
• 제50권4호
• /
• pp.419-428
• /
• 2024

Prefabricated partially-encased composite (PEC) structural component is widely used in construction industry due to its superior structural performance and easy assembly characteristic. However, the solid web in traditional PEC components tends to split concrete into two halves, thus potentially reduces structural integrity and requires double concrete pouring. To overcome the above disadvantages, a new PEC beam with open-web π-shaped steel is proposed in this paper. Four open-web PEC beams with varying sectional height, flange thickness and web void rate were constructed and tested under flexural loads. During experimental tests, all beams exhibited typical flexural failure modes with strong moment capacities and excellent ductility. Owing to the unique construction form of web opening, steel-concrete bonding properties were enhanced and very small relative steel-concrete slips were observed. Experimental results also showed that the flexural capacity of such PEC beams increased with the increase of the sectional height and flange thickness, while was not affected by the web void rate. At last, a flexural capacity formula of the open-web PEC beam was proposed based on the whole section plastic rule. The formula results agreed well with experimental results.