• The KSFM Journal of Fluid Machinery
• /
• v.4 no.4 s.13
• /
• pp.22-27
• /
• 2001

The pump/motor selection program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements, and calculates specific speed based on flow rate, total head and rotational speed. Then the calculated specific speed is used to select pump types and speed prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program match very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• Structural Monitoring and Maintenance
• /
• v.3 no.3
• /
• pp.277-296
• /
• 2016

There is a need for rapid and objective assessment of concrete bridge decks for maintenance decision making. Infrared Thermography (IRT) has great potential to identify deck delaminations more objectively than routine visual inspections or chain drag tests. In addition, it is possible to collect reliable data rapidly with appropriate IRT cameras attached to vehicles and the data are analyzed effectively. This research compares three infrared cameras with different specifications at different times and speeds for data collection, and explores several factors affecting the utilization of IRT in regards to subsurface damage detection in concrete structures, specifically when the IRT is utilized for high-speed bridge deck inspection at normal driving speeds. These results show that IRT can detect up to 2.54 cm delamination from the concrete surface at any time period. It is observed that nighttime would be the most suitable time frame with less false detections and interferences from the sunlight and less adverse effect due to direct sunlight, making more "noise" for the IRT results. This study also revealed two important factors of camera specifications for high-speed inspection by IRT as shorter integration time and higher pixel resolution.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.71-77
• /
• 2007

High speed electric trains have time-varying nonlinear loads causing voltage fluctuations to the power system. A cumulative probablistic approach is the most commonly used method to solve time varying loads. Flicker can be defined as the effect produced on the human visual perception by a changing emission of light lamps subjected to magnitude fluctuations of their supply voltage. This paper provides an in depth analysis on harmonics and flickers measurement of the high speed electric train loads. And the measurement results are evaluated by the IEC 61000-3-6 and IEC 61000-3-7.

• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.481-490
• /
• 2013

In this paper, an investigation of weapon tracking performance is shown in regard to improving individual weapon performance of aiming objects. On the battlefield, a battle can last only a few hours, sometimes it can last several days until finished. In these long-lasting combats, a wide variety of factors will gradually lower the visual ability of soldiers. The experiments were focusing on enhancing the degraded aiming performance by applying visual tracking technology to roof mounted sights so as to track the movement of troops automatically. In order to select the optimal algorithm among the latest visual tracking techniques, performance of each algorithm was evaluated using the real combat images with characteristics of overlapping problems, camera's mobility, size changes, low contrast images, and illumination changes. The results show that VTD (Visual Tracking Decomposition)[2], IVT (Incremental learning for robust Visual Tracking)[7], and MIL (Multiple Instance Learning)[1] perform the best at accuracy, response speed, and total performance, respectively. The evaluation suggests that the roof mounted sights equipped with visual tracking technology are likely to improve the reduced aiming ability of forces.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.67-74
• /
• 2001

According as the patterns of PCB (Printed Circuit Board) become denser and complicated, quality and accuracy of PCB influence the performance of final product. It's attempted to obtain trust of 100% about all of parts. Because human inspection in mass-production manufacturing facilities are both time-consuming and very expensive, the automation of visual inspection has been attempted for many years. Thus, automatic visual inspection of PCB is required. In this paper, we used an algorithm which compares the reference PCB patterns and the input PCB patterns are separated an object and a scene by filtering and edge detection. And than compare two image using pattern matching algorithm. We suggest an defect inspection algorithm in PCB pattern, to be satisfied low cost, high speed, high performance and flexibility on the basis of $640{\times}480$ binary pattern.

• Speech Sciences
• /
• v.15 no.1
• /
• pp.53-62
• /
• 2008

The purpose of this study was to examine the English l sound in an English short story produced by 16 Korean students in order to determine various allophones of the sound using acoustic visual displays and perceptual judgments. The subjects read the story in a quiet office at normal speed. Each word included the lateral sound in onset or coda positions and before a vowel of the following word. Results showed as follows: Firstly, there was a durational difference between the two major groups. Also the majority of the subjects produced the clear l regardless of the contexts. Some students produced the sound as the Korean flap or the English glide [r]. A few missing cases were also seen. The dark l was mostly produced by the subjects of English majors in coda position with a few cases before a vowel in a phrase. Visual displays using the computer analysis were very helpful in distinguishing lateral variants but sometimes perceptual process would be necessary to judge them in fast and weak production of the target word. Further studies would be desirable to test the discrepancies between the acoustical and perceptual decisions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.950-955
• /
• 2005

This paper describes an intelligent filler wire feeding device which can control 3- dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. By means of visual sensor controlled filling the missing material into the joint gap and 3 dimensional seam tracking, lineup errors from manufacturing tolerances and the repeatability of lineup jigs and weld robot can be balanced and at an even seam quality which avoids weld defects. In this paper, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the intelligent filler wire feeding device.

• Journal of Korea Multimedia Society
• /
• v.4 no.3
• /
• pp.222-229
• /
• 2001

Many techniques have been proposed for digital image enlargement, which use spatially neighbored pixels information in a still image. In this paper, we propose the digital image interpolation method that improves edge characteristics by selectively transposing the sub-windows of pseudomedian filter, which results in relatively better performance than others. We have simulated the proposed algorithm using Visual C++ and verified performance of the algorithm by PSNR(Peak signal Noise Ratio) and edge characteristics. Finally, we have designed the adaptive pseudomedian by using synopsys VHDL(Very high speed integrated circuit Hardware Description Language).

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1973-1979
• /
• 2000

Driving the need for machine vision system is growing consumer demand for quality and defect-free products. Especially it is the most important in tarpaulin's manufacturing process achieves automatically by machine vision instead of by man vision. In this paper pinholes detection is performed by using morphology algorithms. Top hat transform is one of morphology applications. This transform take high performance of defect detection in the case that unexpected changes occur in some non-uniform background. For pinholes defect, automatic visual inspection system has been developed, which was composed by a line-scan camera, illumination, a frame grabber, a motor driver and control units. This system has excellent capacity to defect pinholes to the 0.1 mm by 0.5 mm in size and to work in moving objects by maximum 20 m/min in speed.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.486-490
• /
• 1989

In this paper, a program controlling an auto-audio media - cassette deck - by a 16 bit personal computer is studied in order to execute audio and visual learning in CAI. The results of this study are as follows. 1. Audio and visual learning is executed efficiently in CAI. 2. Access rate of voice information to text/image information is about 98% and 60% in "play" and "fast forward" respectively. 3. In "fast forward", quality of a cassette tape affects voice information access rate in propotion to motor driving speed. 4. Synchronizing signal may be mistaken by defects of tape itself.