• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.72-77
• /
• 2010

During the period of reinforcement work for the licensing renewal of CANDU NPP, the fuel channels, Calandria tubes and feeders of CANDU Reactor are replaced. The remote visual inspection of Calandria internal is also performed during the period of reinforcement work. This period is a unique opportunity to inspect the inside of the Calandria. The visual inspection for the Calandria vessel and its internals of Wolsong NPP Unit 1 was performed by Nuclear Engineering & Technology Institute(NETEC) of KHNP. To perform this inspection, NETEC developed equipment applied new technology such as the synchronization of 3D CAD, automatic alignment and control system. The inspection confirmed that the Calandria integrity of Wolsong NPP Unit 1 is perfect.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.3
• /
• pp.39-44
• /
• 2012

Electronics in modern lives have become more miniaturized and precise. Multi Layered Ceramic Capacitor (MLCC) occupies 50% of electronic components consisting of electronics. This high volume of the production needs high speed and more precise machine performances. The dominate parts of the production equipments are the module transporting components and the visual inspection module. Most visual inspection has been off-line because of the image processing time. In this paper, a new image processing method is proposed to reduce thousands of matrix calculation for image processing and realize on-line high speed inspection.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.26-35
• /
• 1998

This paper presents a visual inspection algorithm looking for solder joint defects of IC chips on PCBs (Printed Circuit Boards). In this algorithm, seven features are proposed in order to categorize the solder joints into four classes such as normal, insufficient, excess, and no solder, and optimal back-propagation network is determined by error evaluation which depend on the number of neurons in hidden and out-put layers and selection of the features. In the end, a good accuracy of classification performance, an optimal determination of network structure and the effectiveness of chosen seven features are examined by experiment using proposed inspection algorithm.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.4
• /
• pp.205-213
• /
• 2001

The condition assessment of bridges is one of the important procedures in the safety evaluation of the structures. The current inspection guideline is rather ambiguous and vague so that the inspection results based on the existing guidelines are highly subjective and varing from person to person and even day to day for a given person. It is therefore, necessary to improve the current inspection criteria in order to provide consistent results in safety assessment. To circumvent possible inconsistencies in inspection and rating of bridge components, the revised criteria have been proposed in this study. The proposed guideline and criteria may be efficiently used for the realistic and consistent assessment of bridge structures.

• IE interfaces
• /
• v.9 no.1
• /
• pp.63-71
• /
• 1996

A wire harness is an assembly cables and/or wires to transmit signals between electronic assemblies in automobiles and electronic appliances. Inspection of such a wire harness is to check the sequence of assembled cabled each of which is identified by its own color. This paper presents an automated visual inspection system for wire harnesses incorporating back-propagation neural network as a color identification device. The tests performed by using real test specimens show that the inspection system works well enough.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.8-14
• /
• 2011

The clogging of the flow area at the tube support plates(TSPs), especially at the upper TSPs results in the water level oscillation of a steam generator during normal operation. A reduction of the TSP flow area causes to increase in pressure drop within the two-phase flow zone, which destabilizes the boiling flow through the tube bundle. This phenomenon was occasionally observed at a few domestic and foreign nuclear power plants. One of the methods for defining the flow area clogging is visual inspection, which is the most effective inspection method. The results of the visual inspection for TSPs' flow area are clogging images on TSPs' quartrefoil lobes. These images are complexly distorted due to lens aberration and external factors like the distance to a subject and angle etc. In this work, we developed the analysis algorithm for clogging image of the TSP flow area of steam generators. For this purpose, we designed an image verification device applicable to the camera employed in the field for visual inspection and then, we demonstrated the validity of image analysis algorithm by using this device and commercial autoCAD program.

• Journal of the Korean Institute of Gas
• /
• v.19 no.2
• /
• pp.45-53
• /
• 2015

In order to improve the performance of the visual inspection process, in addition to existing automatic visual inspection machine and human inspectors have developed a new process configuration using a Naive Bayes classifier. By applying the classifier, defect leakage and human inspector's work amount could be improved at the same time. New classification method called AMPB was applied instead of conventional methods based on MAP classification. By experimental results using the filter product for camera modules, it was confirmed that it is possible to configure the process at the level of leakage ratio 1.14% and human inspector's work amount ratio 75.5%. It is significant that the result can be applied in such a wide range as gas leak detection which is the collaboration process between inspection machine and human inspector's

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.80-85
• /
• 2010

BGA 409 chip currently the most as a visual inspection of the exterior inspection is conducted. Human depending on visual inspection of the exterior inspection of the current state of testers, depending on how the test results because the change is difficult to expect reliable results. Therefore, the challenges of visual inspection of BGA solder balls to improve the visual inspection technique was developed. However, BGA solder ball size of the microstructure and the characteristics of the distinction between hard test the accuracy of the fall orientation error has a problem. In this paper BGA solder balls exterior inspection of the accuracy to improve the edge detection algorithm, the complement of features and only the comparison proposed a pattern-matching techniques, based on the characteristics of spatial configuration of the area by improving the standard error of the orientation proposed improvements.

• Journal of Gifted/Talented Education
• /
• v.20 no.1
• /
• pp.1-30
• /
• 2010

The purpose of this study was to develop the inspection model of cognitive ability to identify visual artistic giftedness of the elementary school children with considering the relation between visual artistic giftedness and cognitive ability based on literature and preceding research. The research method applied literature research and quantitative research. Through literature review on the relation between art education and cognitive thinking and visual artistic of giftedness, it was suggested to prescribe the validity of cognitive ability as an element for identification of visual artistic giftedness identification, and then prescribed the elements of cognitive ability, and developed the inspection model of cognitive ability by measuring specific variables. Based on the results of literature research through the quantitative research, verified significance of developed inspection instrument on cognitive ability, validity and reliability of the inspection model of cognitive ability according to visual artistic giftedness identification of the elementary school children. As a result of reviewing related literature and preceding research, it could be referred that visual thinking ability, spatial perception power and critical thinking ability coincided with a characteristic of an art field can show excellent ability in various art activities and be valid criteria of visual artistic giftedness as cognitive ability of the visual artistic gifted with potential possibilities. In conclusion, as the elements of cognitive ability for the visual artistic giftedness identification of the elementary school children, visual thinking ability, spatial perception power and critical thinking ability were verified to be valid in terms of logical and experimental. Therefore, the result of the research will be able to provide a new approach in education program development of visual artistic giftedness of the elementary school children and a various developmental possibility in identification of visual artistic giftedness.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.145-146
• /
• 2008

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight cannot bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. However the inspection result of machine vision is changed by the illumination of workplace. Therefore we proposed histogram specification in this paper for machine vision inspection accuracy. As a result of histogram specification algorithm, we could increase the exactness of visual inspection and prevent system error from physical and spirit condition of human. More specifically, average inspection error rate was 7.5[%] in existing inspection method but we could see 0.6[%] error rate after applying the algorithm which is presented in this paper.