• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.565-572
• /
• 2022

The white plume from the cooling tower can be generated by mixing between discharging hot and humid air and cold air outside. This causes various problems such as icing, traffic disturbances, and fire factors in the vicinity, moreover it can also damage the image of a company. Various methods can be used to prevent white plume, one of them is to install a heat exchanger at the outlet of the cooling tower so that the heat exchanger transfers as much heat as possible to lower the temperature. Therefore the air flow path in the cooling tower should be optimized. Installation of the filler can be used to make the air flow better, thus we investigate the effect of filler on the air flow using CFD method. The pressure and velocity profile in the cooling tower could be acquired by the calculations. The filler made the velocity of the air entering the heat exchanger uniform this was because high flow resistance of the filler suppresses the generation of eddy in the cooling tower. But the total air pressure drop increased about 2 times with filler because the pressure drop by the filler accounted for about 60% of the total pressure drop.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.138-156
• /
• 2023

Some of the metal cultural heritage that make up a considerable proportion of Korea's cultural heritage have been installed and displayed outdoors due to their own functions, roles, and scale. Therefore, more diverse and complex damages can occur outdoors than they are in a stable environment. Therefore, it is necessary to combine accurate diagnosis and systematic survey methods in order to utilize basic data obtained from research results as data for the long-term and continuous conservation management as well as to do the research to diagnose the conservation status of outdoor cultural heritage. The clepsydra(hereinafter referred to as Jagyeongnu) of Changgyeonggung Palace, the National Treasure has been installed and displayed outdoors since it was manufactured. Though regular conservation and maintenance of the Jagyeongnu have been carried out, damage still occurred. Therefore, the scientific research on Jagyeongnu to diagnose the state of conservation was conducted prior to the full-scale conservation treatment. First, the state of conservation was investigated with an examination of basic data, macroscopic inspections and past records of repair history according to the purpose of the research. More detailed examinations were also conducted through the 3D scan, surface pattern investigation, and color difference analysis, and the analysis on materials and contaminants were conducted through P-XRF, FT-IR, and Py-GC/MS. The scientific research reveals that squalane and silicone oil have been applied in the past for conservation treatment and directly exposed to outdoor environmental factors, which caused damage to Jagyeongnu and contaminants such as dust adhered thickly to its surface, accelerating severe damage. A greater incidence of damage was found around the part with relatively high exposure effect, which corresponded with the tendency identified by grouping color difference data. As a result of integrating various research methodologies to diagnose the state of conservation and secure basic data, the causes and types of damage were identified. Furthermore, the process of obtaining digital data to be utilized in various ways, and the color difference analysis presenting visible damage as scientific data and identifying the tendency of damage patterns were confirmed to have been effective.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1209-1220
• /
• 2020

In the case of forest areas, the installation of ground control points (GCPs) and the selection of terrain features, which are one of the unmanned aerial photogrammetry work process, are limited compared to urban areas, and safety problems arise due to non-visible flight due to high forest. To compensate for this problem, the drone equipped with a real time kinematic (RTK) sensor that corrects the position of the drone in real time, and a 3D flight method that fly based on terrain information are being developed. This study suggests to present a method for investigating damage using drones in forest areas. Position accuracy evaluation was performed for three methods: 1) drone mapping through GCP measurement (normal mapping), 2) drone mapping based on topographic data (3D flight mapping), 3) drone mapping using RTK drone (RTK mapping), and all showed an accuracy within 2 cm in the horizontal and within 13 cm in the vertical position. After evaluating the position accuracy, the volume of the landslide area was calculated and the volume values were compared, and all showed similar values. Through this study, the possibility of utilizing 3D flight mapping and RTK mapping in forest areas was confirmed. In the future, it is expected that more effective damage investigations can be conducted if the three methods are appropriately used according to the conditions of area of the disaster.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.321-330
• /
• 1993

Purpose: A retrospective analysis was performed to evaluate the incidence of radiation induced lung damage after the radiation therapy for the patients with carcinoma of the lung. Method and Materials: Sixty-six patients with lung cancer (squamous cell carcinoma 27, adenocarcinoma 14, large cell carcinoma 2, small cell carcinoma 13, unknown 10) were treated with definitive, postoperative or palliative radiation therapy with or without chemotherapy between July 1987 and December 1991. There were 50 males and 16 females with median age of 63 years (range: 33~80 years). Total lung doses ranged from 500 to 6,660 cGy (median 3960 cGy) given in 2 to 38 fractions (median 20) over a range or 2 to 150 days (median in days) using 6 MV or 15 MV linear accelerator. To represent different fractionation schedules of equivalent biological effect, the estimated single dose (ED) model, $ED=D{\dot}N^{-0.377}{\dot}T^{-0.058}$ was used in which D was the lung dose in cGy, N was the number of fractions, and T was the overall treatment time in days. The range of ED was 370 to 1357. The endpoint was a visible increase in lung density within the irradiated volume on chest X-ray as observed independently by three diagnostic radiologists. Patients were grouped according to ED, treatment duration, treatment modality and age, and the percent incidence of pulmonary damage for each group was determined. Result: In 40 of 66 patients, radiation induced change was seen on chest radiographs between 11 days and 314 days after initiation of radiation therapy. The incidence of radiation pneumonitis was increased according to increased ED, which was statistically significant (p=0.001). Roentgenographic changes consistent with radiation pneumonitis were seen in $100\%$ of patients receiving radiotherapy after lobectomy or pneumonectomy, which was not statistically significant. In 32 patients who also received chemotherapy, there was no difference in the incidence of radiation induced change between the group with radiation alone and the group with radiation and chemotherapy, among the sequence of chemotherapy No correlation was seen between incidence of radiation pneumonitis and age or sex. Conclusions: The occurrence of radiation pneumonitis varies. The incidence of radiation pneumonitis depends on radiation total dose, nature of fractionation, duration of therapy, and modifying factors such as lobectomy or pneumonectomy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.928-935
• /
• 2015

This paper presents low temperature structural tests of a UAV wing which has room temperature-curing adhesive bond. The wing structure is made of carbon fiber reinforced composites, and the skins are bonded to the inner structures (such as ribs and spars) using room temperature-curing adhesive bond. Also, to verify damage tolerance design of the wing structure, barely visible impact damages are intentionally created in the critical areas. The attachment fittings of the wing are fixed in a specially designed chamber which can simulate the low temperature environments of the operating altitudes. The test load is applied by hydraulic actuators which are placed outside the chamber. The structural tests consist of strain survey tests and a durability test for 1-life fatigue load spectrum. During the tests, strains of major parts are measured by strain gauges and FBG sensors. The change of the initial impact damages is also monitored using piezoelectric sensors. The 1-life damage tolerance of the composite structure is verified by the structural tests under the simulated environments.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.306-314
• /
• 2020

The use of synthetic resins in ceramic restoration poses several challenges, including aging and potential damage to artifacts, which has raised the need to investigate new materials and restoration methods. This study set out to incorporate full color 3D printing into the 3D digital technology-based restoration method, an emerging approach currently being researched, and to print out missing parts with color information. After examining material physical properties with an experiment, the investigator printed out missing parts from a white porcelain vessel and grayish-blue-powdered celadon plate and compared them in chromaticity and brilliance. The experimental results show that the outputs had comparable tensile strength to the original restoration materials, whereas the recorded compressive strength was approximately 1.4~2 times higher than that of the original restoration materials. According to the NIST table of color difference values, the white porcelain vessel was visible at ΔE^*ab 1.55, and the grayish-blue-powdered celadon plate was perceivable at 3.34. Even though it was impossible to express the colors accurately owing to printer limitations, this non-contact approach reduced the possibility of damage to the minimum. In conclusion, it can be applied to objects with a high chance of damage or generate display effects through purposeful color differentiation in missing parts.

• Korean Journal of Environment and Ecology
• /
• v.9 no.1
• /
• pp.1-14
• /
• 1995

To investigate the damage on the forest plant community by the air pollution around Daesan, Kunsan industrial complex, five sites(Daesan) and three sites(Kunsan) were set up and surveyed(Area : 500$m^2$/site). In the analysis of community structure, the dominant species in the canopy and understory layer were Pinus densiflora, P. thunbergiana. ones in the shrub layer appeared Rhododendron mucronulatum and Quercus spp. in the Daesan industrial complex. Species diversity of the plant community in Daesan industrial complex showed very severe difference between plots. Soil acidity measured 4.67~5.12. It was not found that plant community in Daesan industrial complex appeared serious damage by the air pollutant. In the analysis of community structure the dominant species in the canopy and understory layer were P. densiflora, P. thunbergiana in Kunsan industrial complex. Species diversity of the plant community in Kunsan industrial complex was prove to low as nearer from the pollutant. Soil acidity measured 4.32~4.76 and it was very strong acidity. It was found that plant community as nearer from the pollutant appeared visible damage entirely by the air pollutant in Kunsan industrial complex.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.743-750
• /
• 2006

Poplars and willow were planted to identify suitable species and varieties for landfill reclamation at the Sudokwon Landfill Site in 1997. Survival rate, growth performance, vitality, visible foliar injury by pollutants, fungi, and leaf insects, and stem borer damage have been investigated for 10 clones of 4 poplar species and 2 clones of one willow species from 1997 to 2005. The average survival rates of poplar and willow clones were drastically decreased from 90% in 1997 to 53% in 2005. Among poplar species, Populus alba ${\times}$ P. glandulosa showed the highest mean survival rate of 66%, while Populus koreana ${\times}$ P. nigra var. italica and Populus euramericana were the lowest of 41%, respectively in 2005. Clivus, which is one of the clones from Populus alba ${\times}$ P. glandulosa, showed the highest survival rate of 73%. For mean height, Ec028 clone(P. euramericana) showed the highest of $11.2m{\pm}2.1m$ and followed by Clivus of $11.0m{\pm}2.0m$. Clone 131-27(Salix alba) was the lowest of $7.8m{\pm}1.6m$. Vitality, defoliation, visible foliar damage, and stem borer damage were significantly different among clones. Most of Populus alba ${\times}$ P. glandulosa and Salix alba clones seemed to have strong vitality and to be tolerant to various stresses at the site. However, Populus nigra ${\times}$ P. maximowiczii was sensitive to the stress. We have selected 5 clones in total: Clivus as the best clone for waste landfill reclamation, and additionally two Salix clones 131-25, 131-27 and two clones of Populus alba ${\times}$ P. glandulosa (72-9, 72-16) have been selected. These five clones could be supplied for planting at sites having an environment similar to the Sudokwon Landfill Site.

• Journal of Environmental Health Sciences
• /
• v.43 no.4
• /
• pp.247-256
• /
• 2017

Objectives: The deaths of Korean victims exposed to the disinfectant CMIT/MIT have remained unresolved. This is mainly due to a lack of concordance between the few available toxicity tests and the abundant epidemiological data, making it difficult to establish a cause-and-effect relationship. Therefore, this study was carried out to investigate any potential associations between CMIT/MIT exposure and death. Methods: Groups of experimental and control C57BL/6 mice were instilled (in the trachea) with chloromethylisothiazolinone/methylisothiazolinone (CMIT/MIT) using a visual instillobot. CMIT/MIT was instilled over a period of three days and eight weeks, respectively, to achieve acute and chronic exposures. A threshold dose-response model was applied for estimating the threshold level as one line of evidence for a causal association between CMIT/MIT and death. Results: An acute exposure of 1.2 mg ai/kg/day of CMIT/MIT was estimated to reflect the threshold for death. The dose-response curve with this threshold showed a very steep slope and a narrow range of CMIT/MIT exposures. The narrow range of CMIT/MIT exposures, in particular, indicated an evident boundary between survival and death, thus implicating a strong causal association. A similar threshold dose-response relationship observed following acute exposure was also seen following chronic exposure to CMIT/MIT. Airborne disinfectant exposure was visible as minimal or mild lung damage with no fibrosis, as shown by histopathological tests. However, many observations are considered to be functional respiratory tract or lung failure due to death, as observed in necropsies of the mice that died due to CMIT/MIT exposures. Conclusions: There are two strong lines of evidence for a causal association between death and CMIT/MIT exposure: 1) The threshold dose-response curve, with a very steep slope and a narrow range of CMIT/MIT exposures showing a visible boundary between survival and death; and 2) many cases of functional respiratory or lung failure.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.394-402
• /
• 2010

The objective of this study was to identify the effects of ozone on the two species in controlled environment. $Sedum$ $kamtschaticum$ and $Hosta$ $longipes$ were exposed in both control and ozone chamber to investigate photosynthesis, antioxidant enzyme activity, visible damage, the number and the size of stomata and the plastogloubuli. Ozone was fumigated in the concentration of $200{\mu}g{\cdot}kg^{-1}$ for 8 hours in a day (from 08:00 AM to 04:00 PM). Firstly, net photosynthesis of two species was decreased after ozone fumigation. Secondly, glutathione reductase activities showed significant difference between control and ozone treatment. Thirdly, visible symptoms of leaves were expressed such as chlorosis, necrosis and decoloration. Also, the size of stoma was significantly decreased in ozone-exposed plants. Furthermore, the intercellular space of $Hosta$ $longipes$ showed increased phenomenon because the mesophyll was collapsed. The number and the size of the plastogloubuli were significantly larger in ozone stress.