• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.529-534
• /
• 2004

Millimeter waves are potentially useful for high resolution ranging and imaging in low optical visibility conditions such as fog and smoke. Also, They are used for wide band communications. However, it is necessary to develop a theoretical and experimental understanding of millimeter wave propagation to assess the performance of millimeter wave systems. The intensity fluctuations and mutual coherence function (MCF) describe atmospheric effects on the millimeter wave propagation. Using the quasi-optical method (QOM), an efficient and practical method was suggested to obtain the intensity distribution of the antenna focal plane from MCF which can be determined using meteorological data.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.630-639
• /
• 2001

This study proposes a new calculation method for generating real nighttime lamp-lit images. In order to improve the color appearance in the prediction of a nighttime lamp-lighted scene, the lamp-lit image is synthesized based on spectral distribution using the estimated local spectral distribution of the headlamps and the surface reflectance of every object. The Principal component analysis method is introduced to estimate the surface color of an object, and the local spectral distribution of the headlamps is calculated based on the illuminance data and spectral distribution of the illuminating headlamps. HID and halogen lamps are utilized to create beam patterns and captured road scenes are used as background images to simulate actual headlamp-lit images on a monitor. As a result, the reproduced images presented a color appearance that was very close to a real nighttime road image illuminated by single and multiple headlamps compared to the conventional graphic-based algorithm.

• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.183-190
• /
• 2020

In this paper, the illuminating optics of asymmetric light distribution was studied, which allowed the light distribution to be uniform even for short-range irradiation on a wide illumination area. In the case of a light installed at a short distance, the light is not diffused enough because of the short irradiation distance. For this reason, it is difficult to satisfy uniformity of illumination. In addition, lighting design for asymmetric distribution is required because the lighting device is installed tilted, for visibility. Therefore, the design of lighting systems with asymmetric light distribution could achieve uniform illumination of the target surface even under short-distance irradiation. This was then applied to the license lamp, a lighting system featuring short light irradiation distance, to confirm that it satisfies the legal standards.

• Clean Technology
• /
• v.14 no.2
• /
• pp.136-143
• /
• 2008

The objective of this study is to investigate the visibility of plume at the Y power plant stack, which fires the orimulsion as a fuel. The plume contains numerous primary particles under $1\;{\mu}m$ size and inorganic ions possibly inferred by the chemicals of secondary aerosol formation. We evaluated the visibility of the plume using the modified PLUVUE-II model. The monitoring data on the particle size distribution (PSD) and secondary aerosols of sulfate were applied to estimate and evaluate the main factors of plume opacity. The chemical reactions were applied to the model for the secondary aerosol formation of $(NH_4)_2SO_4(s)$. The maximum plume length was estimated by an optic method using threshold contrast. The results showed that the plume length was strongly dependent upon the PSD and $(NH_4)_2SO_4(s)$ concentration of the plume emitted from the stack.

• Journal of the Optical Society of Korea
• /
• v.15 no.1
• /
• pp.90-95
• /
• 2011

12-year LIDAR observations of tropospheric aerosol vertical distribution using a Mie scattering LIDAR in Hefei ($31.9^{\circ}N$, $117.2^{\circ}E$) from 1998 to 2009 are presented and analyzed in this paper. Characters of temporal variation and vertical distribution of tropospheric aerosol over Hefei are summarized from the LIDAR measurements. The impacts of natural source and human activities on the aerosol vertical distribution over Hefei could be seen clearly. Dust particles from the north in spring could affect the aerosol distributions below about 12 km over Hefei, and aerosol scale height in April reaches $2.29{\pm}0.68\;km$. Both LIDAR measurements and surface visibility imply that aerosols in the lower troposphere have been increasing since about 2005.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2004

Nowadays the soccer becomes one of the best spot lighting sports in the world Especially the 2002 Korea-Japan World Cup was deeply impressed on all the korean. One goal of illuminating engineering should be the design of lighting system that can provide consistently high task visibility regardless of where a task might be located within a working space. The television broadcasting on the soccer has been an important role in the media. The standard of FIFA(The Federation Internationale do Football Association) requires recommended illuminance levels for artificial lighting for a player, an audience, TV broadcasting, as well as everybody in the stadium. This paper has proposed an algerian to select the suboptimal lighting tower position for watching and TV broadcasting a soccer game within a pleasant environment and an optimum illuminance distribution. The position using the software Philip's Calculux was chosen based an the calculations of a horizontal illuminance, vertical illuminance, uniformity, glare, and so on by changing lighting tower positions.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.79-85
• /
• 2020

Ahn-heung Proving Ground(APG) of Agency for Defense Development(ADD) is the only weapon test site which has been performing firing tests for many kinds of missile, artillery and ammunition. APG has been performing the firing tests of so many times every year. The tests related to missiles, artillery and ammunitions cover 80% among the quantity of annual test events. The target area of many kinds of missile, artillery and ammunition is on the sea. Therefore, APG has its marine firing ranges which were approved by the ministry of Defense. Both weapons and ships can run into each other on the sea. APG has to monitor and detect the positions of the ships in the specific dangerous zone on the sea. The positions of the ships are detected by Scanter 2001 radar and GPS100 detection radar. Evading the time period when the ships appear very often on the sea may be a good solution to keep the maritime safety. And evading the place where the ships appear very often on the sea may be a good solution as well. This paper is to analyze the ships' distribution characteristics of marine firing range, which are to raise the efficiency of many kinds firing tests which have been performed in APG of ADD. Ship distribution data from February 2014 to December 2016 were used in this paper. Ship distribution was analyzed with monthly data, seasonal data and etc. The number of the ships in approved sea area is higher in the morning than in the afternoon, and in fall than other seasons, and from August to November, and below 0.5 m in the hight of wave. Using the these conditions, we can raise the test efficiency of many kinds firing tests and guarantee maritime safety. The number of the ships in approved sea area is entirely unrelated to visibility of the sea. The time period when the number of the ships are high on the sea is morning. The season when the number of the ships are comparatively high on the sea is fall. APG of ADD could raise the efficiency of the firing tests and improve the maritime safety, using the analysis results of the characteristics on the ship distribution.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.3
• /
• pp.454-467
• /
• 2013

A practical Ship Inner Shell Optimization Method (SISOM), the purpose of which is to improve the safety of the seagoing transport ship by decreasing the maximum Still Water Bending Moment (SWBM) of the hull girder under all typical loading conditions, is presented in this paper. The objective of SISOM is to make the maximum SWBM minimum, and the section areas of the inner shell are taken as optimization variables. The main requirements of the ship performances, such as cargo hold capacity, propeller and rudder immersion, bridge visibility, damage stability and prevention of pollution etc., are taken as constraints. The penalty function method is used in SISOM to change the above nonlinear constraint problem into an unconstrained one, which is then solved by applying the steepest descent method. After optimization, the optimal section area distribution of the inner shell is obtained, and the shape of inner shell is adjusted according to the optimal section area. SISOM is applied to a product oil tanker and a bulk carrier, and the maximum SWBM of the two ships is significantly decreased by changing the shape of inner shell plate slightly. The two examples prove that SISOM is highly efficient and valuable to engineering practice.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.3
• /
• pp.115-140
• /
• 2010

Great concerns about atmospheric aerosols are attributed to their multiple roles to atmospheric processes. For example, atmospheric aerosols influence global climate, directly by scattering or absorbing solar radiations and indirectly by serving as cloud condensation nuclei. They also have a significant impact on human health and visibility. Many of these effects depend on the size and composition of atmospheric aerosols, and thus detailed information on the physicochemical properties and the distribution of airborne particles is critical to accurately predict their impact on the Earth's climate as well as human health. A single particle analysis technique, named low-Z particle electron probe X-ray microanalysis (low-Z particle EPMA) that can determine the concentration of low-Z elements such as carbon, nitrogen and oxygen in a microscopic volume has been developed. The capability of quantitative analysis of low-Z elements in individual particle allows the characterization of especially important atmospheric particles such as sulfates, nitrates, ammonium, and carbonaceous particles. Furthermore, the diversity and the complicated heterogeneity of atmospheric particles in chemical compositions can be investigated in detail. In this review, the development and methodology of low-Z particle EPMA for the analysis of atmospheric aerosols are introduced. Also, its typical applications for the characterization of various atmospheric particles, i.e., on the chemical compositions, morphologies, the size segregated distributions, and the origins of Asian dust, urban aerosols, indoor aerosols in underground subway station, and Arctic aerosols, are illustrated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.821-827
• /
• 2008

This paper presents the prediction model of attenuation characteristics of satellite communication signals operating in the range from 1 to 20GHz, associated with the effects of the Asian Dust. And this paper analyze the effects of the Asian Dust in theory that dust particles size and density, OPC, signal levels, exponentail distribution and the permittivity. The prediction model of the dust attenuation was got, combining the formula of the complex dielectric constant of Asian dust. Expressions for specific attenuation and attenuation are derived in terms of the height, visibility. Therefore it make an investigate to the prediction model of attenuation characteristics continuously.