• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.258-266
• /
• 2007

CFD calculations are performed for KRISO 3600TEU container ship(KCS) models with different Reynolds numbers. Numerical calculations of the turbulent flows with the free surface around KCS have been carried out at $Re=0.791{\times}106\;and\;Re=1.4{\times}107$ using a standard Fluent package. In both cases, Froude number is fixed with 0.26 and wave elevation is simulated by using the VOF method. The calculated results at $Re=1.4{\times}107\;and\;Re=0.791{\times}106$ are compared with the experiment data of KRISO towing tank test and RIMS CWC test, respectively. Boundary layer thickness and wake field shows Reynolds number differences. There are some changes in wave pattern behind transom stern.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.370-378
• /
• 2007

In this study. a numerical analysis has been performed for the turbulent flow around a 15,000TEU twin-skeg container ship using a commercial CFD code. FLUENT. The computed results have been compared with the model test data from MOERI. We investigated viscous resistance coefficient. wake distribution and characteristics of the shear flow according to the grid numbers. Although the free surface is approximated by the plane of symmetry in this work. the calculated axial velocity and transverse vector show a good agreement with the MOERI experimental data except for the region of 0.9 level of axial velocity at the propeller plane. The numerical analysis show that commercial CFD code is useful tool for the evaluation of complex hull form with twin-skegs.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권4호
• /
• pp.477-487
• /
• 2012

We investigated the aerodynamic characteristics of a three-dimensional (3D) wing with an endplate in the vicinity of the free surface by solving incompressible Navier-Stokes equations with the turbulence closure model. The endplate causes a blockage effect on the flow, and an additional viscous effect especially near the endplate. These combined effects of the endplate significantly reduce the magnitudes of the velocities under the lower surface of the wing, thereby enhancing aerodynamic performance in terms of the force coefficients. The maximum lift-to-drag ratio of a wing with an endplate is increased 46% compared to that of wing without an endplate at the lowest clearance. The tip vortex of a wing-with-endplate (WWE) moved laterally to a greater extent than that of a wing-without-endplate (WOE). This causes a decrease in the induced drag, resulting in a reduction in the total drag.

• Kyungpook Mathematical Journal
• /
• 제57권4호
• /
• pp.651-665
• /
• 2017

Some computational fluid dynamics problems concerning the thin films flow of viscous fluid with a free surface and draining or coating fluid-flow problems can be delineated by third-order ordinary differential equations. In this paper, the aim is to introduce the numerical solutions of the boundary value problems of such equations by variational iteration method. In this paper, it is shown that the third-order boundary value problems can be written as a system of integral equations, which can be solved by using the variational iteration method. These solutions are gleaned in terms of convergent series. Numerical examples are given to depict the method and their convergence.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.190-201
• /
• 1998

The numerical methodology for computing the impact forces of the water entry bodies has been developed. The present method assumed the impact occurs within a very short time interval and the viscous effects do not have time enough to play a significant role in the impact forces, that is, the flow around a water-entry object was assumed as an inviscid potential flow and is solved by the source panel method. The elements fully submerged into the water are routinely treated, but the elements intersected with the effective planar free surface are redefined and reorganized to be amendable to the source panel method. To validate the present code, it has been applied to disk and ogive model and compared with experimental data. Good agreement has been obtained.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.37-44
• /
• 2000

수면 하에서 정속으로 움직이는 MACA0012 수중익에 의하여 생성되는 정상파 및 쇄파에 대한 실험적 연구를 회류수조에서 수행하였다. 실린더의 몰수깊이에 따른 자유표면 파형을 관측하였고, PIV를 이용하여 수중익과 자유표면 사이 유동장의 순간속도와 평균속도를 계측한 후 와도분포를 구하였다. 쇄파의 발생, 전개 그리고 소멸과정을 조사하였고, 특히 자유표면 부근의 와류 구조와 같은 복잡 순간유동장의 가시화를 통하여 수중익과 쇄파 간의 상호작용을 해석하고자 하였다. 본 실험으로 PIV 계측기법은 조선해양공학의 다양한 연구분야에 훌륭히 적용될 수 있음을 보았고 더욱이 정량적인 해석이 필요한 실험에도 사용이 가능함을 확인하였다.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.1-10
• /
• 2000

저항 및 자항등의 유체성능이 뛰어난 선형을 개발하기 위해서는 선체에 작용하는 여러 방향의 힘은 물론 그러한 결과를 발생시키는 선체 주위의 유동 현상에 대한 이해가 필수적이다. 이러한 국부 유동 현상의 규명을 위해 일반 상선 및 특수선 주위의 전체 파형과 속도 분포 등의 국부 유동현상을 관측할 수 있는 종합적인 국부유동 계측 시스템이 개발되었다. 이를 사용하여 KRISO 3600TEU 컨테이너선(KCS) 주위의 국부유동을 계측하였다. 본 자료는 날씬하고 빠른 현대적인 상선의 유동을 이해하는데 매우 귀중한 자료일 뿐만 아니라 계산유체역학 기법을 이용한 계산 결과의 검증을 위해서도 매우 중요한 자료로 평가된다.

• 한국항해항만학회지
• /
• 제37권1호
• /
• pp.1-7
• /
• 2013

본 연구에서는 개발된 선미부에 수직날개를 부착한 선박의 조파저항성능을 예측할 수 있는 수치해석기법의 검증에 관한 것이다. 수치해석기법은 비점성 유동장 해석기법인 랜킨소오스 패널법과 와류격자법을 사용하여 개발하였으며, 자유수면 경계조건의 비선형성은 반복해법을 사용하여 만족시켰고, 선박의 트림과 침하량을 구하는 알고리즘을 포함하고 있다. 수치해석을 위한 선체표면의 패널을 생성하기 위하여 패널절단법을 사용하였다. 4000TEU 컨테이너 운반선을 대상 선박으로 하여 선미부 6개소의 서로 다른 위치에 수직날개를 부착하여 수치해석을 수행하였으며, 수치해석기법의 타당성을 검증하기 위하여 상용 점성 유동장 해석 프로그램인 FLUENT를 사용하여 선체 주위의 점성 유동장을 계산하였고, 모형시험을 수행하여 얻은 실험 결과를 수치해석 결과와 서로 비교하였다.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.508-516
• /
• 2010

This study aims at investigating the effect of the chamfer on the liquid sloshing in the three-dimensional (3D) rectangular tank. In order to simulate the 3D incompressible viscous two-phase flow in the 3D tank with partially filled liquid, the present study has adopted the volume of fluid (VOF) method based on the finitevolume method which has been well verified by comparing with the results of the relevant previous researches. The effects of the chamfering top corners of the tank on the liquid sloshing characteristics have been investigated. The angle of the chamfering top corners (${\theta}$) has been changed in the range of $0^{\circ}{\leq}{\theta}{\leq}60^{\circ}$(${\Delta}{\theta}=15^{\circ}$) to observe the free surface behavior, and the effect on wall impact load. Generally, as the angle of the chamfering top corners increases, the impact pressure on the upper knuckle point decreases. However it seemed that a critical angle of the chamfering top corners exists to reveal the lowest impact pressure on the wall.

• 한국해양공학회지
• /
• 제32권4호
• /
• pp.228-236
• /
• 2018

The performance of a porous swash bulkhead for the reduction of the resonant liquid motion in a swaying rectangular tank was investigated based on the assumption of linear potential theory. The Galerkin method (Porter and Evans, 1995) was used to solve the potential flow model by adding a viscous frictional damping term to the free-surface condition. By comparing the experimental results and the analytical solutions, we verified that the frictional damping coefficient was 0.4. Darcy's law was used to consider the energy dissipation at a porous bulkhead. The tool that was developed with a built-in frictional damping coefficient of 0.4 was confirmed by small-scale experiments. Using this tool, the free-surface elevation, hydrodynamic force (added mass, damping coefficient) on a wall, and the horizontal load on a bulkhead were assessed for various combinations of porosity and submergence depth. It was found that the vertical porous bulkhead can suppress sloshing motions significantly when properly designed and by selecting the appropriate porosity(${\approx}0.1$) and submergence depth.