• 대한의용생체공학회:의공학회지
• /
• 제41권5호
• /
• pp.179-184
• /
• 2020

Purpose: The purpose of this study was to evaluate the effect according to the NEX, VENC, targeted cardiac phases on the velocity measurement of 4D phase-contrast MRI. Materials and Methods: The abdominal aortic phantom was made to experiment. The working fluid was mixed with water and glycerin to mimic the density and viscosity of human blood. The inlet velocity was Reynolds number 2000. The experimental conditions were NEX 1 and 4, VENC 102 cm/s and 200 cm/s, and 10 and 15 targeted cardiac phases, respectively. The average flow rate, average velocity, maximum velocity, and cross-section area were measured. Results: As a result of the case-by-case comparison, the error rate was less than 5%. There was no significant difference (p > 0.05). Conclusion: It is expected that this result will be useful for acquiring blood flow information in clinical practice.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.64-72
• /
• 2001

According to the regulation of IMO, oil discharge from ships is allowed under 15ppm only and an oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. A parallel plate type oily water separator which is one of gravity type separators can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is an efficient method in dealing with a large amount of rich oil with high specific gravity. This work is focused on the fundamental investigation of the performance of the plate type oily water separator by visualization method and PIV(Particle Image Velocimetry) measurement to acquire multi-point velocity data simultaneously. The experimental results showed that the space of the plates acts a significant role in separating process and it was found that an important point to minimize a vortex flow is to flow a large amount of fluid in space of the plates in order to promote the efficiency of separation.

• 한국소음진동공학회논문집
• /
• 제20권12호
• /
• pp.1147-1152
• /
• 2010

The wet brakes used in an industrial forklift often produce noise on braking. Elimination or reduction of this squeal noise is an important task for the improvement of comforts. In this paper, a test rig was developed which was possible for testing of brake noise and an experimental measurement on squeal noise was performed. The causes of the brake noise are identified by experimenting how the factors such as automatic transmission fluid, the groove of friction-plate pad and the material of friction-plate pad affect the squeal noise. In order to identify the squeal characteristics, the signal analyses for noise are performed by using frequency spectrums. Experimental results showed that the viscosity of automatic transmission fluid and the groove pattern of friction-plate pad largely affect the reduction of the wet brake squeal noise in an industrial forklift.

• 공업화학
• /
• 제3권4호
• /
• pp.614-619
• /
• 1992

Soft segment가 각각 ester 및 ether형 polyol로된 2종의 polyurethane(PU) ionomer를 emulsion 블렌딩하여, 블렌드의 분산점도, 및 emulsion cast film의 접촉각, 기계적 특성을 조성의 함수로 측정하였다. 블렌드의 기계물성은 혼합법칙으로부터 심한 scattering이나, negative deviation을 보였으며, 이는 ester 및 ether형 polyol간의 상용성의 결여에 기인하는 것으로 보았다. 접촉각 측정 결과로부터 유화입경이 작은 PPG PU 입자가 주로 도막표면층을 형성하는 것을 확인할 수 있었다.

• 비파괴검사학회지
• /
• 제20권5호
• /
• pp.402-411
• /
• 2000

이 연구에서는 점탄성 재료중의 하나인 아스팔트 세멘트의 점탄성 특성을 초음파를 이용하여 측정하는 방법에 대하여 고찰하였다. 2.25MHz의 주파수에서 $-20^{\circ}C$부터 $60^{\circ}C$까지의 온도변화에 따른 파속도와 감쇠를 측정한 후, 선형 점탄성 이론에 근거하여 저장 및 손실 종탄성율, 손실 탄젠트, 저장 및 손실 종컴플라이언스와 같은 물성변화를 구하였다. Maxwell과 Voigt-Kelvin 점탄성 모델을 이용하여 응력완화 및 크리프 거동과 점도의 변화도 예측하였다. 또한 중첩원리와 이동인자의 타당성을 문헌에 보고된 결과와 비교함으로써 입증할 수 있었다.

• Journal of Applied Biological Chemistry
• /
• 제50권4호
• /
• pp.234-238
• /
• 2007

The effects of ultra-fine pulverization on the physicochemical properties of rice starch (RS) were investigated using a high impact planetary mill. After pulverization, RVA characteristics, peak viscosity, break down, and set back values of RS decreased from 274.75 to 9.42 RVU, 214.46 to 6.17 RVU, and 87.80 to 17.00 RVU, respectively. The pasting properties also changed significantly. X-Ray diffractogram revealed RS had four A-type peaks, which disappeared after pulverization. The peak temperature and gelatinization enthalpy of RS using differential scanning calorimetry (DSC) were 13.99 J/g at $75.14^{\circ}C$, whereas the pulverized RS (PRS) had two peaks, 0.13 J/g at $63.88^{\circ}C$ and 1.23 J/g at $101.24^{\circ}C$. DSC measurement showed the retrogradation degree of PRS was lower than that of RS after storage at 4 and $25^{\circ}C$. The enzymatic (${\alpha}$-amylase) digestibilities of RS and PRS were 72.7 and 77.3%, respectively.

• 공업화학
• /
• 제17권1호
• /
• pp.62-66
• /
• 2006

본 연구에서는 폐 알루미늄을 이용하여 제조한 환경친화형인 발포 알루미늄 기능성 판넬의 특성을 조사하였고, 증점 공정, 교반 혼합 공정, 발포 공정, 냉각 공정을 거쳐 첨색 공정에 의한 제품 품질의 고급화를 추구하였다. 시험은 크게 세 가지로 구분하여 음향투과 손실 시험, 흡음율 측정 시험, 그리고 발포작업조건 및 스크랩 혼합시험을 시행하였다. 그 결과 폐 알루미늄을 이용해 만든 기능성 판넬은 초경량성이며 방음과 차음, 유해전자파 차폐에 탁월하고 약 $2.2kcal/mh^{\circ}C$ 정도로 낮은 열전도율 및 뛰어난 단열효과를 보이는 것으로 나타났다.

• 한국식생활문화학회지
• /
• 제26권3호
• /
• pp.283-294
• /
• 2011

The purpose of this study was to determine the optimal mixing conditions for three different amounts of mulberry juice, sugar, and agar powder for Yanggaeng prepared with mulberry juice. The experiment was designed according to the central composite design for estimating the response surface, which demonstrated 16 experimental points including 2 replicates for mulberry juice, sugar and agar powder each?? The mechanical and sensory properties of test materials were measured, and these values were applied to the mathematical models. A canonical form and perturbation plot showed the influence of each ingredient on the final product mixture. Measurement results of the mechanical properties showed a significant increase or decrease?? in pH, sugar content, water content, viscosity, l-value, a-value, b-value, hardness, springiness, chewiness, gumminess, cohesiveness. Also the sensory measurements showed a significant improvement?? in appearance, flavor, color, sweetness, texture, overall quality. As a result, the optimum formulation by numerical and graphical methods was calculated as mulberry juice 41.99 g, sugar 90.00 g, agar powder 3.18 g.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.127-133
• /
• 2001

There are several factors affecting the effectiveness of polymerization of the esthetic restorative materials. Among those factors, the initiator. camphoroquinone has the unique characteristic. of which the light sensitivity is very dependent on the wavelength of blue light. Camphoroquinone shows the most light absorption ability in the wavelength range of 470nm. So most of clinically used light curing systems adopt this phenomenon as their polymerization mechanism. The most popular way of light curing system is standard 40 second curing. But the problem of standard curing technique shows the rapid increase of resin viscosity followed by the acceleration of polymerization and the limited resin flow, resulted in reduction of the physicalproperty of restoration by retained stress. The object of this study was to verify the effects of narrow-banded wavelength on the microhardness of the esthetic restorative materials. a composite resin and a compomer, using filters which have peak wave length of 430nm, 450nm, 470nm, respectively. The results were as follows: 1. All the experimental groups showed lower hardness value than the control group. 2. In DyractAP, the hardness value by wavelength showed the same changing pattern on both upper and lower surfaces. 3. In DenFil, the hardness value by wavelength showed different changing pattern on upper and lower surfaces. 4. The hardness ratio showed similar pattern to the hardness variation of lower surface. but there was no significant difference between measurement in 10 minutes and 3 days later, besides the increase of hardness value.

• Preventive Nutrition and Food Science
• /
• 제8권4호
• /
• pp.343-348
• /
• 2003

To elucidate the effect of gamma-irradiation on the physicochemical properties of zein films, the molecular and mechanical properties of the films were examined after irradiation at various irradiation doses. Gamma-irradiation of zein solutions caused the disruption of the ordered structure of the zein molecules, as well as degradation, cross-linking, and aggregation of the polypeptide chains based on an SDS-PAGE study. Gamma-irradiation increased the solubility of zein and decreased the viscosity due to cleavage of the polypeptide chains. Protein solubility of the zein films in urea/2-mercaptoethanol also increased with increasing irradiation doses. Alterations of the zein molecules by irradiation decreased water vapor per-meability by 12% and increased the elongation of zein films. However, mean tensile strength of the zein films was decreased by gamma-irradiation treatment. Measurement of Hunter color values indicated that irradiation caused a destructive effect on yellow pigments, resulting in a significant decrease in Hunter b values. The microstructure as observed by scanning electron microscopy showed that irradiated zein film had a smoother and glossier surface than the non-irradiated films.