• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제11권4호
• /
• pp.549-559
• /
• 1999

An experimental study was peformed to measure the viscosity of microencapsulated PCM slurries as the functions of its concentration and temperature, and also influence to its fluid dynamics. For the viscosity measurement, a rotary type viscometer, which was equipped with temperature control system, was adopted. The slurry was mixed with water and Sodium Lauryl Sulphate as a surfactant by which its suspended particles were dispersed well without the segregation of particles during the experiment. The viscosity was increased as the concentration of MicroPCM particle added. The surfactant increased 5% of the viscosity over the working fluid without particles. Experiments were proceeded by changing parameters such as PCM particles'concentration as well as the temperature of working fluid. As a result, a model to the functions of temperature for the working fluid and its particle concentration is proposed. The proposed model, for which its standard deviation shows 0.8068, is agreed well with the reference's data. The pressure drop was measured by U-tube manometer, and then the friction factor was obtained. It was noted that the pressure drop was not influenced by the state of PCM phase, that is solid or liquid in its core materials at their same concentration. On the other hand, it was described that the pressure drop of the slurry was much increased over the working fluid without particles. A friction factor was placed on a straight line in all working fluids of the laminar flow regardless of existing particles as we expected.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.543-544
• /
• 2009

The fiber(NY, PP) known to the effective material on improvement of the fire-resistance of HSC(high strength concrete) has a difference for fluidity according to the variation of a length and contents of fiber. In this study, to analyze the effect of a length and contents of the fiber on the fluidity of HSC and fheological characteristics, we calculated a viscosity of mortar by mini slump-flow, simple V-lot and viscometer. With the test results, the fluidity characteristic showed a moderate difference by a length and contents of the fiber, but showed a significant difference by increase of the fiber contents. ${\ast}$ AFR Concrete (Advenced Fire Resistant Concrete)

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.122-127
• /
• 2004

In this study, we evaluated the effect of the molecular weight of the polymer on electrospun poly(ethylene terephthalate) (PET) nonwovens, and their mechanical properties as a function of the linear velocity of drum surface. Polymer solutions and electrospun PET nonwovens were characterized by means of viscometer, tensiometer, scanning electron microscope(SEM), wide angle X-ray diffraction measurement (WAXD) and universal testing machine (UTM). By keeping the uniform solution viscosity, regardless of molecular weight differences, electrospun PET nonwovens with similar average diameter could be obtained. In addition, the mechanical properties of the electrospun PET nonwovens were strongly dependent on the linear velocity of drum surface. From the results of the WAXD scan, it was found that the polymer took on a particular molecular orientation when the linear velocity of drum surface was increased. The peaks became more definite and apparent, evolving from an amorphous pattern at 0 m/min to peaks and signifying the presence of crystallinity at 45 m/min.

• Journal of the Korean Ceramic Society
• /
• 제44권8호
• /
• pp.430-436
• /
• 2007

Rheological properties of cement paste containing ultrafine blastfurnace slag (UBS, $9600cm^2/g$) were investigated by mini-slump test, pH meter, conduction calorimeter and coaxial cylinder viscometer. In order to improve rheological properties of the cement paste, granulated blastfurnace slag (GBS, $3500cm^2/g$) and polycarboxylate type superplasticizer (PC) were also used in this experiment. The fluidity of cement paste containing UBS was decreased. The yield stress and plastic viscosity of cement paste was increased with increasing UBS. But the rheological properties were improved when GBS and PC were added to UBS blended cement paste. In the relationship between the yield stress and the plastic viscosity or the mini-slump value, the yield stress of the cement paste was proportional to the plastic viscosity of it. However the cement paste mini-slump value was in inverse proportional to the yield stress.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제28권6호
• /
• pp.1293-1297
• /
• 1999

Effect of rice protein and lipid on rheological properties of gelatinized rice flour solutions(4%) with three rice varieties(Dongjin, Jinmi, Tamjin) known for varying taste of cooked rice was investigated with Haake viscometer. The rheological behaviors of all rice flour solutions were illustrated by Herschel Bulkley equation and exhibited pseudoplastic behavior with yield stress. When rice flour solutions treated with protease and dithiothreitol, there was decreased in flow behavior index value. Flow behavior index was decreased by dealbumin and deglutelin rice flour solutions among deprotein groups. The Jinmi rice flour solutions exhibited slightly lower consistency index than Dongjin and Tamjin. Defatted rice flour solutions exhibited lower consistency index than rice flour solutions, while dealbumin, deglutelin rice flour solutions exhibited high consistency index. Protease treated rice flour solutions exhibited increase in Dongjin and Tamjin. The yield stress was increased in sequence eating quality. Yield stress of defatted rice flour solutions was decreased, while deglutelin and rice starch flour solutions was increased. The time dependent charac teristics of all rice flour solutions appeared forming hysteresis loop and thixotropic behavior showed. The time dependent characteristics was appeared in sequence eating quality. Rice starch and deglutelin flour solutions appeared greatly time dependent characteristics, but defatted rice flour solutions appeared very little.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권1호
• /
• pp.9-15
• /
• 2005

The objective of this study is screening the shear stress related proteins in chondrocytes using twodimensional electrophresis and MALDI-TOF. C-28/I2 cell line were grown. The fluid-induced shear stress(FISS) was applied using a cone viscometer at a rotational velocity of 80rpm for periods of 12 hours. Control cultures were tested under identical conditions without mechanical load application. Collected samples were used for the two-dimensional electrophoresis and MALDI-TOF. The identified proteins were calcyclin, RPE-spondin, interleukin-2, extracellular signal regulated kinase (ERK), lamin B2, porA protein, and RET-ELE1 protein. All of them showed a decreased expression. In conclusion, seven proteins were identified as a shear stress related proteins in chondrocytes. As the destruction of articular cartilage is one of main pathogenesis of TMJ internal derangement, this study will give useful information for the understanding of the molecular aspect of TMJ disease.

• Journal of Life Science
• /
• 제8권5호
• /
• pp.526-531
• /
• 1998

In this study, the composition and characteristics of poly-$\beta$-hydroxybutyrate (PHB) biosynthesized by Actinobacillus sp. EL-9 are investigated. PHB produced by Actinobacillus sp. EL-9 was identified as the homopolymer of 3-hydroxy-butyric acid (PHB) by infrared spectroscopy and nuclear magnetic resonance spectroscopy analysis. The melting tem-perature (T$_{m}$), and crystallization temperature(T$_{c}$) of PHB was 169.7$^{\circ}C$ and 69.13$^{\circ}C$, respectively. The viscosity on he basis of Brookfield viscometer was 6.01 ㎗/g. The viscosity-average molecular weight estimated by Mark-Ho-wink-Sakurada equation was 1.08$\times$10$^{6}$ ($\pm$3,000).00).

• YAKHAK HOEJI
• /
• 제35권4호
• /
• pp.319-325
• /
• 1991

Aluminum phosphate gel was synthesized by reacting aluminum sulfate as a soluble aluminum salt to tribasic sodium phosphate in this study. The optimal synthesis conditions based on the yield of product were investigated by applying Box-Wilson experimental design. It was found that optimal synthesis conditions were as follows: Reaction temperature; $61~71^{\circ}C$, concentration of two reactants; 12.27~13.83%, concentration ratio of two reactants; [AI$_{2}$(SO$_{4}$)$_{3}$]/[Na$_{3}$PO$_{4}$]= 0.5, reaction time; 10.9~12.1 minutes, drying temperature of product; $60~72^{\circ}C$. Aluminum phosphate gel prepared by the optimal synthesis conditions was suspended with four types of natural and synthetic gums at the concentration of 0.375~1.5wv%. Their Theological properties of aluminum phosphate gels were examined with Haake-Rotovisco RV 20 rotational viscometer. It showed that the higher concentration of suspending agents and lower temperature, the higher viscosity. Aluminum phosphate gel suspended by pectin and agar showed plastic flow with rheopexy, and their gels suspended by sodium alginate and sod. CMC showed plastic flow with thixotropy.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• 제37권1호
• /
• pp.37-42
• /
• 2011

The rheological properties of the aqueous solution of scleroglucan industrially produced by Sclerotium rolfsii at concentrations ranging from 0.1 % to 2 % (w/w) were determined by using brookfield viscometer and rheometer. Gel matrices of scleroglucans were stable over a wide range of pH and ionic strength in the aqueous medium. In the oil dispersion with phytosqualane in oil phase and three kinds of thickening agent in aqueous phase, scleroglucan showed the highest dispersion properties. The synergistic effect between scleroglucan and locust bean gum was also examined. The highest viscosity was obtained for the solution mixture at scleroglucan/locust bean gum weight ratio of 5 : 5. The results of this study suggest the potential of scleroglucan as thickner for a wide variety of cosmetic formulations.

• Food Science and Preservation
• /
• 제8권1호
• /
• pp.102-108
• /
• 2001

Flow properties of the concentrated pigment solutions extracted from purple-fleshed sweet potatoes were determined using a cone and plate rotational viscometer for soluble solids concentration range of 25 to 65% at temperature range of 20 to 60 $^{\circ}C$. The purple-fleshed sweet potato pigment solutions exhibited Newtonian behavior. Temperature dependency for the viscosity of the solution followed the Arhenius relationship with activation energy values between 14.23 and 43.00 kJ/mol, which increased linearly with soluble solids concentration. A relationship between viscosity, temperature and soluble solids concentration was investigated. At the same temperature, the viscosity of the concentrated pigment solutions increased exponentially as the concentration increased with higher degree of such phenomena at lower temperatures.