• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.49-49
• /
• 2010

The most commonly used numerical modelling techniques for acoustics and vibration are based on element based techniques, such as the nite element and boundary element method. Due to the huge computational eorts involved, the use of these deterministic techniques is practically restricted to low-frequency applications. For high-frequency modelling, probabilistic techniques such as SEA are well established. However, there is still a wide mid-frequency range, for which no adequate and mature prediction techniques are available. In this frequency range, the computational eorts of conventional element based techniques become prohibitively large, while the basic assumptions of the probabilistic techniques are not yet valid. In recent years, a vast amount of research has been initiated in a quest for an adequate solution for the current midfrequency problem. One family of research methods focuses on novel deterministic approaches with an enhanced convergence rate and computational eciency compared to the conventional element based methods in order to shift the practical frequency limitation towards the mid-frequency range. Amongst those techniques, a wave based prediction technique using an indirect Tretz approach is being developed at the K.U.Leuven - Noise and Vibration Research group. This paper starts with an outline of the major features of the mid-frequency modelling challenge and provides a short overview of the current research activities in response to this challenge. Next, the basic concepts of the wave based technique and its hybrid coupling with nite element schemes are described. Various validations on two- and threedimensional acoustic, elastic, poro-elastic and vibro-acoustic examples are given to illustrate the potential of the method and its benecial performance as compared to conventional element based methods. A closing part shares some views on the open issues and future research directions.

• 전자공학회논문지 IE
• /
• v.49 no.1
• /
• pp.18-23
• /
• 2012

In this paper, a potable device application for DC-DC converter was designed for voltage protection circuit. Voltage protection circuit to offer the under voltage lock out and over voltage protection consists of a comparator and bais circuits were implemented using. XFAB 1um CMOS process, SPICE simulations was confirmed through the characteristics. Simulation results, under voltage lock out input voltage is 4.8 V higher when the turn-on and, 4.2 V less when turn-off. When the input voltage is low voltage is applied can be used to prevent malfunction of the circuit. Over voltage protection is 3.8 V reference voltage when the output voltage caused by blocking circuit prevents device destruction can be used to improve the stability and reliability. The virtual control circuits of the DC-DC converter connected. According to the results of the abnormal voltage, voltage protection circuit behavior was confirmed. The proposed voltage protection circuit of the DC-DC converter cell is useful are considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.546-554
• /
• 2016

Free-viewpoint video (FVV) is a synthesization technology that generates a virtual viewpoint video using multiple videos recorded via wireless devices at heterogeneous locations. In order to introduce a new service that grafts the FVV onto the real-time streaming service using wireless devices, we need to overcome several constraints. Two main factors of those constraints are the limited wireless capacity that are shared fairly by multiple devices, and the transmission time constraint with which live streaming services have to comply. Therefore, for optimal quality of entire videos, a set of transmitting devices should be effectively selected depending on the condition of wireless channel and the required video popularity of specific viewpoint requested from users. For optimal selection, this study proposes a heuristic algorithm that takes into account the aforementioned factors from possible wireless transmission error behaviors and the requested viewpoint popularity. Through analysis and simulation, we show that with this algorithm, quality of most popular viewpoint videos is guaranteed. Furthermore, performance comparison against the existing scheme which is based only on the location of recording devices is made.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.455-465
• /
• 2020

The purpose of this study is to evaluate the photoneutron characteristics generated by the linear accelerator target and collimator. The computer simulation design firstly, consisted of a target, a single material target and a composite material target. Secondly, it consisted of a cone beam and a fan beam depending on the type of the collimator. Finally, the material of the fan beam collimator is composed of a single material composed of only lead (Pb) and a composite material collimator composed of tungsten (W) and lead (Pb). The research method calculated the photoneutron production rate and energy spectrum using F2 tally from the surface of a virtual sphere at a distance of 100 cm from the target. As a result, firstly the photoneutron production rate was 20% difference, depending on the target. Secondly, depending on the type of the collimator, there was a 10% difference. Finally, depending on the collimator material, there was a 40% difference. In the photoneutron energy spectrum, the average photoneutron flux tended to be similar to the photoneutron production rate. As a result, it was confirmed that the 9 MeV linear accelerator photoneutron are production increased more by the collimator than by the target, and by the material, not the type of the collimator. Selecting and operating targets and collimator with low photoneutron production will be the most active radiation protection. Therefore, it is considered that this research can be a useful data for introducing and operating and radiation protection of a linear accelerator for container security inspection.

• Journal of Trauma and Injury
• /
• v.23 no.2
• /
• pp.113-118
• /
• 2010

Purpose: Prolonged stay in the emergency department (ED), which is closely related with the time interval from the ED visit to a decision to admit, might be associated with poor outcomes for trauma patients and with overcrowding of the ED. Therefore, we examined the factors affecting the delay in the decision to admit severe trauma patients. Also, a multidisciplinary department system was preliminarily evaluated to see if it could reduce the time from triage to the admission decision. Methods: A retrospective observational study was conducted at a tertiary care university hospital without a specialized trauma team or specialized trauma surgeons from January 2009 to March 2010. Severe trauma patients with an International Classification of Disease Based Injury Severity Score (ICISS) below 0.9 were included. A multivariable logistic regression analysis was used to find independent variables associated with a delay in the decision for admission which was defined as the time interval between ED arrival and admission decision exceeded 4 hours. We also simulated the time from triage to the decision for admission by a multidisciplinary department system. Results: A total of 89 patients were enrolled. The average time from triage to the admission decision was $5.2{\pm}7.1$ hours and the average length of the ED stay was $9.0{\pm}11.5$ hours. The rate of decision delay for admission was 31.5%. A multivariable regression analysis revealed that multiple trauma (odds ratio [OR]: 30.6, 95%; confidence interval [CI]: 3.18-294.71), emergency operation (OR: 0.55, 95%; CI: 0.01-0.96), and treatment in the Department of Neurosurgery (OR: 0.07, 95%; CI: 0.01-0.78) were significantly associated with the decision delay. In a simulation based on a multidisciplinary department system, the virtual time from triage to admission decision was $2.1{\pm}1.5$ hours. Conclusion: In the ED, patients with severe trauma, multiple trauma was a significant factor causing a delay in the admission decision. On the other hand, emergency operation and treatment in Department of Neurosurgery were negatively associated with the delay. The simulated time from triage to the decision for admission by a multidisciplinary department system was 3 hours shorter than the real one.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.45-54
• /
• 2002

This paper proposes a video compression algorithm using characteristics of wavelet coefficients. The proposed algorithm can provide lowed bit rate and faster running time while guaranteeing the reconstructed image qualify by the human virtual system. In this approach, each video sequence is decomposed into a pyramid structure of subimages with various resolution to use multiresolution capability of discrete wavelet transform. Then similarities between two neighboring frames are obtained from a low-frequency subband which Includes an important information of an image and motion informations are extracted from the similarity criteria. Four legion selection filters are designed according to the similarity criteria and compression processes are carried out by encoding the coefficients In preservation legions and replacement regions of high-frequency subbands. Region selection filters classify the high-frequency subbands Into preservation regions and replacement regions based on the similarity criteria and the coefficients In replacement regions are replaced by that of a reference frame or reduced to zero according to block-based similarities between a reference frame and successive frames. Encoding is carried out by quantizing and arithmetic encoding the wavelet coefficients in preservation regions and replacement regions separately. A reference frame is updated at the bottom point If the curve of similarity rates looks like concave pattern. Simulation results show that the proposed algorithm provides high compression ratio with proper Image quality. It also outperforms the previous Milton's algorithm in an Image quality, compression ratio and running time, leading to compression ratio less than 0.2bpp. PSNR of 32 dB and running tome of 10ms for a standard video image of size 352${\times}$240 pixels.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.27-38
• /
• 2011

This study was aimed to investigate the effects of restaurant in-store color and music congruency on consumer's emotional responses and behavioral intentions. The web survey was conducted among 400 customers(aged from 20~39 years old) who lived in Seoul and Kyunggi, Incheon Province. To find ensemble effect of color and music, 3D studio MAX were used to make high-stimulus(exciting) and low-stimulus(calm) and 3D virtual reality restaurant simulation stimulus were applied. The statistical data analyses were performed using SPSS/WIN 18.0 and reliability analysis, factor analysis, regression analysis were used. Based on the result of the conducting factor analysis, emotional responses were classified into 2 factors: positive emotion and negative emotion. Satisfaction was classified into 1 factor: satisfaction. Loyalty was classified into 1 factor: loyalty. Cronbach's alpha was calculated for the reliability of the survey instrument. Consequently, restaurant in-store color and music congruency were shown to affect positive emotion and negative emotion. Positive emotion and negative emotion were shown to affect satisfaction. Satisfaction were shown to affect loyalty. Music congruency had a higher effect on positive emotion than color congruency. Color congruency had a higher effect on negative emotion than music congruency. The results of this study will serve as a basis of color and music congruency with restaurant atmospherics.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.5
• /
• pp.239-246
• /
• 2017

Communications for mobile sink groups such as rescue teams or platoons bring about a new challenging issue for handling group mobility in wireless sensor networks. Recently, a group region-based approach has been proposed to send data to a mobile sink group. However, it uses excessive flooding for 3 steps (group region discovery, region information notification, and data dissemination) to support mobile sink group. Thus, it causes high energy consumption and data delivery failure. Moreover, its per-sink mobility supporting scheme makes energy consumption and data delivery failure more serious. Thus, this paper proposes an Energy-efficient and Reliable Mobile Group communication protocol (ERMG) to support a mobile sink group, which exploits a virtual grid structure. For the group region discover and notification and the data dissemination, ERMG uses communications with only cell heads of grid cells that manages group sinks. ERMG also uses a per-grid based scheme to support sink mobility. Simulation results show that ERMG has 30% less energy consumption and 6% more desired delivery deadline success ratio than the existing protocols.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.2
• /
• pp.9-14
• /
• 2012

Exposed dose of young child should be managed necessarily. Young child is more sensitive than adult of a Radioactivity, especially, and lives longer than adult. Must reduce exposed dose which follows The ALARA(As Low As Reasonably Achievable)rule is recommended by ICRP(International Commission on Radiological Protection)within diagnostic useful range. Therefore, We have to prepare Pediatric DRL(Diagnostic Reference Level) in Korea as soon as possible. Consequently, in this study, wish to estimate organ dose and effective dose using PCXMC Program(a PC-Based Monte Carlo Program), and measure ESD(Entrance surface dose)and organ dose using Glass dosimeter, and then compare with DRL which follows EC(European Commission)and NRPB(National Radiological Protection Board). Using glass dosimeter and PCXMC programs conforming to the International Committee for Radioactivity Prevention(ICRP)-103 tissue weighting factor based on the item before the organs contained in the Chest, Skull, Pelvis, Abdomen in the organ doses and effective dose and dose measurements were evaluated convenience. In a straightforward way to RANDO phantom inserted glass dosimeter(GD352M)by using the hospital pediatric protocol, and in a indirect way was PCXMC the program through a virtual simulation of organ doses and effective dose were calculated. The ESD in Chest PA is 0.076mGy which is slightly higher than the DRL of NRPB(UK) is 0.07mGy, and is lower than the DRL of EC(Europe) which is 0.1mGy. The ESD in Chest Lateral is 0.130mGy which is lower than the DRL of EC(Europe) is 0.2mGy. The ESD in Skull PA is 0.423mGy which is 40 percent lower than the DRL of NRPB(UK) is 1.1mGy and is 28 percent lower than the DRL of EC(Europe) is 1.5mGy. The ESD in Skull Lateral is 0.478mGy which is half than the DRL of NRPB(UK) is 0.8mGy, is 40 percent lower than the DRL of EC(Europe) is 1mGy. The ESD in Pelvis AP is 0.293mGy which is half than the DRL of NRPB(UK) is 0.60mGy, is 30 percent lower than the DRL of EC(Europe)is 0.9mGy. Finally, the ESD in Abdomen AP is 0.223mGy which is half than the DRL of NRPB(UK) is 0.5mGy, and is 20 percent lower than the DRL of EC is 1.0mGy. The six kind of diagnostic radiological examination is generally lower than the DRL of NRPB(UK)and EC(Europe) except for Chest PA. Shouldn't overlook the age, body, other factors. Radiological technician must realize organ dose, effective dose, ESD when examining young child in hospital. That's why young child is more sensitive than adult of a Radioactivity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.271-280
• /
• 2014

In wireless sensor networks, there have been two methods for sensing continuously moving object tracking: user-query based method and periodic report based method. Although the former method requires overhead for user query rather than the latter method, the former one is known as an energy-efficient method without transferring unnecessary information. In the former method, a virtual tree, consisting of sensor nodes, is exploited for the user querying and sensor reporting. The tree stores the information about mobile objects; the stored information is triggered to report by the user query. However, in case of fast moving object, the tracking accuracy reduces due to the time delay of end-to-end repeated query. To solve the problem, we propose a query relaying method reducing the time delay for mobile object tracking. In the proposed method, the nodes in the tree relay the query to the adjacent node according to the movement of mobile object tracking. Relaying the query message reduces the end-to-end querying time delay. Simulation results show that our method is superior to the existing ones in terms of tracking accuracy.