• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 추계학술대회 및 정기총회
• /
• pp.113-121
• /
• 2005

Virtual Manufacturing is a powerful methodology for developing a new product, new equipment and new production system. It enables us to check the errors in design before production. This paper deals with a case study of virtual manufacturing in an excavator factory. Boom and rotating table of upper body are selected for application. 3D models of parts and fixtures are developed with CATIA and 3D simulation models are developed with IGRIP. These models are used for the design of fixture to verify the motion of the equipment. As a result, the manual welding systems are replaced by automatic systems and many design errors are corrected in the design phase, which enables us to reduce the developing cost and time.

• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.55-66
• /
• 2015

The objective of this study is to propose a method by which movement fitness can be evaluated using a three-dimensional virtual garment simulation program. To this end, five types of jean pants for men were evaluated on the program by setting the avatars to make particular movements to examine the level of pressure on each body part. To verify whether the clothing pressure measurement produces valid and reliable results, virtual garment simulation program was utilized. The results indicated that there were significant differences in the levels of pressure on body parts depending on the type of test garment and motion. In addition, the clothing pressure measurement results were in line with the appearance evaluation results suggested by a previous study. Based on this set of results, the nomological validity of the clothing pressure measurement program used in this study was verified. Moreover, we employed an appearance evaluation along with the clothing pressure measurement to verify the reliability of the program; there was a high correlation between clothing pressure measurements and appearance evaluation measurements, indicating that measuring clothing pressures may well compensate for the limitations of appearance evaluation. We expect the results of this study to make valuable contributions in facilitating the digitalization of the fashion industry. Furthermore, this study also is significant in that it has suggested 3D virtual fitting programs as a solution to the long-criticized problem related to the evaluation of movement fitness in existing virtual garment simulation programs.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권2호
• /
• pp.167-173
• /
• 2002

본 시스템은 웹 상에서 가상으로 메이크업과 헤어스타일 그리고 액세서리 등을 사용자 자신의 얼굴에 적용시켜 볼 수 있는 시뮬레이션 시스템이다. 시뮬레이션의 결과는 데이타베이스에 저장되며 프린터로도 출력이 가능하다. 본 시스템은 자바 애플릿으로 제작되어 서비스가 되므로 웹 브라우저 이외의 클라이언트 프로그램은 필요하지 않으며, 웹 브라우저에 자바 플러그인만 설치되어 있으면 실행이 가능하다. 윈도 2000의 IIS 웹 서버와 MS-SQL7 데이타베이스를 이용하여 구현하였으며, 자바 애플릿과 데이타베이스의 연결은 상용화된 JDBC Driver Type 4를 이용하였다. 구현된 VMSS는 웹 기반의 서비스 제공을 위한 새로운 컨텐츠 개발의 유형을 제시하였으며, 다양한 분야에 대한 응용이 가능할 것으로 생각된다.

• 한국콘텐츠학회논문지
• /
• 제3권3호
• /
• pp.19-33
• /
• 2003

군사분야에서 컴퓨터 시뮬레이션의 활용은 이미 수십년전부터 이루어지고 있다. 컴퓨터 시뮬레이션을 통해서 실제전투자산을 가동하지 않고 실전과 같은 전투경험을 부여하고 있다. 이러한 시뮬레이션이 실제와 똑같은 환경을 구축하기 위해서는 페더레이트(federate)간의 연동(federation)이 네트워크 상에서 잘 수행되어야 한다. 이에 본 논문에서는 전장 데이터(이하 액티브 패킷)의 신속한 전달을 필요로 하는 긴급한 실제상황과 유사한 전장공간을 구축할 수 있도록 액티브네트워크 상에서의 동적기술(혹은 액티브 네트워크 기술)을 이용해 페더레이트(혹은 액티브 노드) 간의 효율적인 트래픽처리가 가능한 가상 전장 환경을 구성하고, 이에 대한 유효성을 모의실험을 통하여 검증하였다.

• 대한족부족관절학회지
• /
• 제27권3호
• /
• pp.112-116
• /
• 2023

A 74-year-old female patient, who underwent surgery for a left distal tibiofibular fracture 40 years earlier, visited the hospital with an ankle varus deformity due to malunion. The patient complained of discomfort while walking due to the ankle and hindfoot varus deformity but did not complain of ankle pain. Therefore, correction using supramalleolar osteotomy was planned, and through virtual surgical simulation, it was predicted that a correction angle of 24° and an osteotomy gap open of 12 mm would be necessary. An osteotomy guide and an osteotomy gap block were made using three-dimensional (3D) printing to perform the osteotomy and correct the deformity according to the predicted goal. One year after surgery, it was observed that the ankle varus was corrected according to the surgical simulation, and the patient was able to walk comfortably. Thus, for correction of deformity, virtual surgical simulation and a 3D-printed osteotomy guide can be used to predict the target value for correction. This is useful for increasing the accuracy of correction of the deformity.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권6호
• /
• pp.493-499
• /
• 2023

This study developed education contents of measuring spatial dose with virtual reality simulation and applied to students majoring radiological science. The virtual reality(VR) contents with measuring spatial dose rate in the radiation controlled area was developed based on the simulation from pilot study. In this simulation, the tube voltage and tube current can be set from 60 to 120 kVp in 10 kVp steps and 10 to 40 mAs in 10 mAs increments, and the distance from source can be set from 30 to 400 cm continuously. Iron and lead shields can be placed between the source and the detector, and shielding thickness can be set by 1 mm increments ranging from 1 to 20 mm. We surveyed to students for evaluating improvement of understanding spatial dose rate between before and after education by VR simulation. The survey was conducted with 5 questions(X-ray exposure factors, effects by distance from the source, effects from using shield, depending on material and thickness of shield, concept and measuring of spatial dose rate) and all answers showed significant improvement. Therefore, this VR simulation content will be well used in education for spatial dose rate and radiation safety environments.

• 한국소음진동공학회논문집
• /
• 제14권4호
• /
• pp.319-326
• /
• 2004

The soundscape is a novel attempt to offer comfortable sound environments at the urban public spaces by adding pleasant sounds and removing unagreeable ones. Most important factors to be considered therein are to determine what kind of sounds to offer and how to adjust them to the changing circumstances. But, installing, maintaining and adjusting the soundscape system directly in the field will ensue numerous problems as well as high costs. Thus, it is essential to devise a test method to analyse and verify the outcome before the actual installation in the field takes place. This study aims at devising the instrument system that enables to control. with a great ease, numerous variables. reproduce most agreeable sound sources, and can verify the effects on the virtual simulatory settings, which is named as Virtual Acoustic Field Simulation System (VAFSS).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.989-992
• /
• 2004

In general, it is known that walking stability of a quadruped is determined by its COG(Center of Gravity). In this paper, in order to know whether our virtual quadruped robot is applicable to the real quadruped robot, we simulated our virtual model using the data from the real robot‘s walking. We were able to evaluate the stride of quadruped based on direct and inverse kinematics and compared the stride of the simulation with real robot’s it. During the simulation we calculated the COG of the virtual model and evaluated the walking stability of real model.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.612-615
• /
• 2007

This research studies the Virtual Reality simulation of Newton's physics law on rigid body type of objects for physics learning. With network support, collaborative interaction is enabled so that people from different places can interact with the same set of objects in Collaborative Virtual Environment. The taxonomy of the interaction in different levels of collaboration is described as: distinct objects and same object, in which there are same object - sequentially, same object - concurrently - same attribute, and same object - concurrently - distinct attributes. The case studies are the interaction of users in two cases: destroying and creating a set of arranged rigid bodies. We identify a specific type of application for contents authoring with modeling systems integrated with real-time physics and implemented in VR system. In our application called Virtual Dollhouse, users can observe physics law while constructing a dollhouse using existing building blocks, under gravity effects.

• 한국CDE학회논문집
• /
• 제14권4호
• /
• pp.225-233
• /
• 2009

The objective of this paper is to examine a construction method and verify PLC logic using the logical modeling and simulation of a virtual plant has complex manufacturing system and the domain of application is car body assembly line of automotive industrial operated by PLC Program. The proposed virtual plant model for the analysis of the construction method consists of three types of components which are virtual device, intermediary transfer and controller is modeled by logical model but it the case of the verification of PLC program, HMI and PLC logic in the field substitute for the controller. The implementation of the proposed virtual plant model is conducted PLC Studio which is an object-oriented modeling language based on logical model. As a result, proposed methods enable 3D graphics is designed in the analysis step to use for verification of PLC program without special efforts.