• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.559-569
• /
• 2020

In the present study, the fracture toughness of U-shaped notches made of aluminum alloy Al7075-T6 under combined tension/out-of-plane shear loading conditions (mixed mode I/III) is studied by theoretical and experimental methods. In the experimental part, U-notched test samples are loaded using a previously developed fixture under mixed mode I/III loading and their load-carrying capacity (LCC) is measured. Then, due to the presence of considerable plasticity in the notch vicinity at crack initiation instance, using the Equivalent Material Concept (EMC) and with the help of the point stress (PS) and mean stress (MS) brittle failure criteria, the LCC of the tested samples is predicted theoretically. The EMC equates a ductile material with a virtual brittle material in order to avoid performing elastic-plastic analysis. Because of the very good match between the EMC-PS and EMC-MS combined criteria with the experimental results, the use of the combination of the criteria with EMC is recommended for designing U-notched aluminum plates in engineering structures. Meanwhile, because of nearly the same accuracy of the two criteria and the simplicity of the PS criterion relations, the use of EMC-PS failure model in design of notched Al7075-T6 components is superior to the EMC-MS criterion.

• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.

• 대한토목학회논문집
• /
• 제30권5A호
• /
• pp.425-431
• /
• 2010

2가지 이상의 재료로 구성된 다상(multi-phase) 재료는 상 분포에 따라 재료 특성이 다르기 때문에, 상 분포를 묘사할 수 있는 적절한 방법이 필요하다. 본 연구에서는 확률 분포 함수 two-point correlation function과 lineal-path function을 사용하여 재료 내부의 상 분포 상태를 확률적으로 묘사하였다. 수치 계산 방법으로 계산되는 확률 분포 함수를 3개의 매개 변수를 사용한 곡선 접합(curve fitting)을 이용하여 수식으로 표현하고, 적용성을 살펴보기 위하여 2상 합금 미세구조 가상 시편과 지반 모델 시편을 사용하였다. 이를 통해, 확률 분포 함수는 곡선 접합을 이용하여 지수 형태의 수식으로 표현이 가능하며, 이는 시편의 RVE로서의 활용 가능성을 판단하는데 사용될 수 있음을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.26-29
• /
• 2006

We present the structural, magnetic, and electrical properties in the (Al,Mn)N films with various Mn concentrations grown by plasma-enhanced molecular beam epitaxy. X-ray diffraction analyses reveal that the (Al,Mn)N films have the wurtzite structure without secondary phases. All (Al,Mn)N films showed the ferromagnetic ordering. Particularly, ($Al_{1-x}Mn_{x}$)N film with x = 0.028 exhibited the highest magnetic moment per Mn atom at room temperature. Since all the films exhibit the insulating characteristics, the origin of ferromagnetism in (Al,Mn)N might be attributed to either indirect exchange interaction caused by virtual electron excitations from Mn acceptor level to the valence band within the samples or a percolation of bound magnetic polarons arisen from exchange interaction of localized carriers with magnetic impurities in a low carrier density regime.

• Steel and Composite Structures
• /
• 제49권4호
• /
• pp.393-405
• /
• 2023

In this paper, the energy absorption capability of a novel cruciform composite lattice structure was evaluated through the simulation of compression tests. For this purpose, several test samples of Polylactic acid cellular reinforced with continuous glass fibers were prepared for compression testing using the additive manufacturing method of material extrusion. Using a conventional path design for material extrusion, multiple debonding is probable to be occurred at the joint regions of adjacent cells. Therefore, an innovative printing path design was proposed for the cruciform lattice structure. Afterwards, quasistatic compression tests were performed to evaluate the energy absorption behaviour of this structure. A finite element model based on local material property degradation was then developed to verify the experimental test and extend the virtual test method. Accordingly, different combinations of unit cells' dimensions using the design of the experiment were numerically proposed to obtain the optimal configuration in terms of the total absorbed energy. Having brilliant energy absorption properties, the studied cruciform lattice with its optimized unit cell dimensions can be used as an energy absorber in crashworthiness applications. Finally, a cellular structure will be suitable with optimal behavior in crush load efficiency and high energy absorption.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.12-15
• /
• 2006

We present the structural, magnetic, and electrical properties in the (Al,Mn)N films with various Mn concentrations grown by plasma-enhanced molecular beam epitaxy. X-ray diffraction analyses reveal that the (Al,Mn)N films have the wurtzite structure without secondary phases. All (Al,Mn)N films showed the ferromagnetic ordering. Particularly, ($Al_{1-x}Mn_{x}$)N film with x = 0.028 exhibited the highest magnetic moment per Mn atom at room temperature. Since all the films exhibit the insulating characteristics, the origin of ferromagnetism in (Al,Mn)N might be attributed to either indirect exchange interaction caused by virtual electron excitations from Mn acceptor level to the valence band within the samples or a percolation of bound magnetic polarons arisen from exchange interaction of localized carriers with magnetic impurities in a low carrier density regime.

• Computers and Concrete
• /
• 제7권1호
• /
• pp.39-51
• /
• 2010

The system of pores of autoclaved aerated concrete (AAC) is described by the so-called cherry-pit model, a random system of partially interpenetrating spheres. For the simulation of fracture processes, the solid phase is approximated by an irregular spatial network of beams obtained by means of the so-called radical tessellation with respect to the pore spheres. FE calculations using standard software (ANSYS) yield the strain energies of the beams. These energies are used as fracture criterion according to which highly loaded beams are considered as broken and are removed from the network. The paper investigates the relationship between mean fracture strength and microstructure for structures close to real AAC samples and virtual structures with particular geometrical properties.

• 한국전산구조공학회논문집
• /
• 제24권1호
• /
• pp.9-16
• /
• 2011

다상 재료는 상(phase) 분포 상태에 의해 그 특성이 다르기 때문에 상 분포에 따른 재료의 특성을 이해하는 것이 중요하다. 본 연구에서는 미세구조의 상 분포 특성을 묘사할 수 있는 확률 분포 함수를 사용하여 등방성/이방성 미세구조의 상분포 상태를 표현하는 방법을 살펴보았다. 다양한 상 분포를 가진 미세구조들에 유한요소해석 기법을 적용하여 미세구조의 역학적인 거동을 분석함으로서, 상 군집의 분포 상태에 따른 재료의 강도 및 특성의 변화를 살펴보았다. 이를 통해 상 군집의 위상에 의한 재료 강도의 영향 및 군집 크기가 커질수록 강도가 낮아지는 현상을 확인하였다.

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.31-37
• /
• 2011

다상 재료는 상(phase) 분포의 차이에 따라 재료의 특성이 다르기 때문에 상 분포 상태의 특성을 이해하는 것이 중요하다. 본 연구에서는 확률 분포 함수를 사용하여 미세구조의 상 분포 상태를 나타내고, 이를 사용한 미세구조 재구성 방법을 이용해서 특정 2상 미세구조와 통계적으로 유사한 상 분포를 가진 미세구조를 생성하여 기존의 미세구조와 재구성된 미세구조의 특성을 비교하였다. 그리고 서로 다른 임의의 상 분포를 가진 미세구조들에 유한요소해석 기법을 적용하여 서로 다른 하중 방향에 대한 미세구조의 역학적 거동을 분석하였다. 이를 통해, 미세구조 재구성 방법을 사용하여, 제한된 정보만을 이용해서 통계적으로 유사한 특성을 나타내는 미세구조를 모델링 할 수 있음을 확인하였고, 확률 분포 함수와 미세구조의 역학적 거동이 방향에 따라 동일함을 통하여 재생성 된 재료의 등방성을 확인하였다.