• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.165-171
• /
• 2003

The findings of this study indicate that intangible cultural properties are worth preservation and transmission and should be considered as very important as tangible cultural properties. If the studies of intangible cultural properties are continued focusing on their characteristics and formational system, they can be expressed more properly by adding new interactive elements to database and expressive requisites. New techniques introduced in this study are believed to provide people with most reasonable and developmental motives for expression of the existing intangible cultural properties. Concerning Korea's cultural properties centered on intangible cultural properties, information construction should be made with a new idea of information based on database from the previous studies. The result will be able to set an important factor to give wide publicity to our cultural identity, which is currently shown in the process of background communication, and serve as a foothold to deliver exact information to our descendants. The intangible cultural properties are our people's mental cultural heritage resources. If museums or initiator groups, which are organized to spread cultural heritages, can use them as the subjects of exhibition through information construction and visualization, it will function to maximize the educational effect of transmitting our national mental world. The development of digital environment will provide the optimum conditions and tools making it possible to visualize intangible forms and ideas in a virtual cyber space. Given these viewpoints, steady studies and efforts for the improvement of Korea's cultural image should be made in the way of intangible cultural properties as well as tangible ones. They start from the country's accurate appreciation of cultural properties and are embodied in systematic adjustment and relationship between interdependent elements.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.123-135
• /
• 2012

As contents go digital and networks go broadband, there are a lot of changes made to Ad market caused by multimedia and multichannel environment. While platforms as the contents distribution window are increasing, the reality is that additional Ad revenue through platforms is concentrated on mammoth exclusive media because there are small number of the media that has control over platforms is able to create production and provide capital. In addition, as Media rep laws is passed at the Assembly plenary session, tipping effect in Ad market concentrated to some media. In this reality, pay TV market is expected to be within its direct orbit as it is predicted to produce new contents and distribution growth thanks to a wide variety of genres and experimental challenge. Thus, this study is to propose the methodology and an alternative for pay Ad market expansion. As the result of this research, an improvement scheme of indirect advertisement, virtual advertisement, and prohibited advertising item is suggested, and methodology for advertising market expansion is suggested through enterprise and government.

• Journal of the Korean Home Economics Association
• /
• v.50 no.7
• /
• pp.67-79
• /
• 2012

This study analyzed the characteristics of morphing in fashion design through the documentaries on morphing and fashion. The characteristics of morphing in fine art, media, and design area were categorized as reversible metamorphosis, sequential dissolve and blurring of interpolation boundaries. The results were as follow in fashion design. Reversible metamorphosis showed an automatic silhouette transformation by remote control, the metamorphosis of folding method by wearer's own movements and the automatic silhouette transformation by the air pressurizing method. It represented the thoughts of omnipotence as in the feeling of the magical world, the human desire for control in life, the rationalization of magical thinking and imaginative power, the creation of a new dress space and the extension of dress function. Sequential dissolve showed juxtaposition in the same area by the time order, juxtaposition in virtual space through the computer graphics, the series of fashion photography by steel cut of the dress making process and the blending of digital film and fashion design. It represented the approach for the storytelling of fashion show, implication of creative fashion design process and the creation of organic forms and the feeling of fantasy through artificial technology. The blurring of interpolation boundary showed an overlay of different fabrics with transparent boundaries, an overlay of different patterns with transparent boundaries and the blending of fabrics through the visual mixing of color. It represented the obfuscation of the object, the connotation of the space order, the connotation of the extensive and various meanings and the integrative property of objects.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.33-39
• /
• 2006

Home modification has come to be recognized as an important intervention strategy to manage health care conditions, maintain or improve functioning, ensure safety, and reduce the wheelchair user's dependency on others. However, the availability of skilled professionals with experience in home modifications for accessibility is limited. A system that enables accurate remote assessments would be an important tool to improve our ability to perform home assessments more easily and at decreased cost. A Remote Wheelchair Accessibility Assessment System (RWAAS) using Virtualized Reality(VR) technology was developed that enabled clinicians to assess the wheelchair accessibility of users' built environments from a remote location. Characteristics of the camera and 3D reconstruction program chosen for the system significantly affect its overall reliability. In this study, we performed two reliability analyses on the hardware and software components: 1) Verification that commercial software can construct sufficiently accurate 3D models by analyzing the accuracy of dimensional measurements in a virtualized environment; 2) comparison of dimensional measurements with four camera settings. Based on these two analyses, we were able to specify a consumer level digital camera and the Photomodeler Pro software for this system. And we then tested the feasibility of the selected software and hardware in an actual environment. Lastly, A field evaluation was performed to test whether this new system is comparable to the traditional method of accessibility assessment to evaluate its ability to assess the accessibility of a wheelchair user's typical built environment. The results of field trials showed high congruence between the assessments by two methods. Findings suggested that the RWAAS assessments have the potential to enable specialists to assess potential accessibility problems in built environments regardless of the location of the client, home, or specialist.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.11-17
• /
• 2020

This paper proposed the design of a new window signage system architecture, which utilized a window of a building, with attached LED for visible light communication. In this paper, the proposed method using the LED strip to transmit light data and receive the data through a HMD with a smart device camera. The LED strip attached to the existing building window, as a part of semi-transparent signage. Semi-transparent signage based on a controllable LED strip-modules and attached to the window used to provide entertainment contents and the information service to people through optical camera communication (OCC) as well. Also, this work suggests using the camera supplied Head Mounted Device (HMD) as an OCC receiver. The LED attached window signage system structure described in this paper can be utilized in various buildings infrastructure like house, shopping areas, industrial building, etc.

• International Journal of Advanced Culture Technology
• /
• v.6 no.2
• /
• pp.65-71
• /
• 2018

In the digital era, news consumption is not confined in geological boundaries. Technological advances bring the instant dissemination of news into life and allow news audience to consume events that occur far away almost in real time. The transmission has blurred the boundary between traditional media and new media, and the one between physical and virtual world. That is, what if a journalist applies news framing to the news translation process? This paper aims to investigate the gap between the ST and the TT created when the source news texts undergo a translation process. To achieve this aim, the appraisal theory developed by White (2003) is employed to identify a difference between the ST and the TT. Furthermore, we have attempted to identify differences between soft news stories and hard news stories while the STs from both news stories are translated into the TTs. Two time-sensitive events, Hugh Grant's marriage and a U.S. and North Korea summit, were selected. The former (a soft news story) is extracted from the Telegraph and the latter (a hard news story) is from the Washington post. As a result, it was found that such strategies as attitude, engagement, and judgment were used when the source news texts from the hard news story are translated into the target news texts. Under the appraisal theory, the strategies involve evaluative language which refers to positive or negative language that judges the worth of entities. In general, it is said that a journalist frames the SS (especially from the hard news story) to convey his ideology to news consumers. Hypothetically, we assume that a similar framing process takes place in deriving the TT from the SS of the hard news story. Thus, we could conclude that the TT from the hard news story differs from the TT from the soft news story and that the difference can be explained within the framework of White's appraisal theory.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.66-75
• /
• 2006

This paper addresses the implementation of FTTH system based on Ethernet PON technololy. This system consists of OLT and ONT. OLT supports the maximum 24 Gigabit Ethernet interfaces, and then has the flexibility and the scalability for supplying digital communication and broadcasting convergence service in the near future. OLT system consists of switch module, subscriber module, processor module, and E-PON link module, and has the operating system based on Linux. ONT is installed in customer premise to supply both IP-TV and Internet service. Also ONT has the dedicated interface for IP-TV to improve the transmission characteristics of IP-TV signal. We measure the performance of E-PON MAC through this system and then QoS control characteristics per franc in ONT by separating the virtual link for IP-TV from that for data.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.553-558
• /
• 2008

In this paper, we develop a vibration system which can generate diverse vibration effects in realtime by analyzing signals from the sound output of PC. This system is able to detect the occurrences of particular sounds in order to generate corresponding pre-programmed vibration patterns. It contributes to the improvement of the reality and the immersiveness of games and virtual reality applications. In addition, its advantage is to easily add vibration features to applications which were originally developed without consideration for vibration. Our system consists of an external DSP board for signal processing and a vibration pad which can be put on wrists. It is superior to other sound-driven vibration devices because its DSP board can detect more diverse sounds, has higher performance and does not interfere with PC. Also the wrist-wearable vibration pad is able to generate more realistic vibration than other mouse or joystick type devices.

• Archives of design research
• /
• v.16 no.4
• /
• pp.121-128
• /
• 2003

This is the research to find out which one is the best for using manual among the 3 kinds of methods such as 'Text manual' and 'Animation I' and 'Animation II' which is made by Virtual Realities. Three kinds of methods have been experimented respectively. The manual for 'Animation I' adopt the motion video with basis sound and the additional comment and sound is added on the 'Animation II'. Every 3 manual has been studied and estimated by T-test and additional subjective estimation respectively, and the conclusions are as follows. The 1st answer is that 'Animation manual' is more easier than 'text manual', and the 2nd answer is that 'Animation II' is easier than 'Animation I'. Through post-interview and test, It is known that the animation manuals, which has been showing the multimedia, is more attractive than text manual.