• Title/Summary/Keyword: virtual clothing simulation

Search Result 82, Processing Time 0.029 seconds

Comparison of brand-name school uniform patterns for middle school boys and the development of school uniform patterns by students' body shape, using 3D virtual clothing simulation (3D virtual clothing simulation을 활용한 남자 중학생의 브랜드교복 패턴비교 및 체형별 교복 패턴개발)

  • Shin, Jang-Hee
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.23 no.1
    • /
    • pp.143-154
    • /
    • 2021
  • This study attempted to develop winter jackets and pants patterns reflecting the latest comfortable and active school uniform trends, using middle school boy avatars having various body shapes. Jacket and pants pattern-drawing methods and margins differed. Based on the results, research prototypes were prepared. Then, virtual wear prospective drawings, clothing pressure, and appearance were assessed according to body shape. Jackets were assessed using 25 factors, while pants were assessed using 19. Then, correlations between the jackets and pants were analyzed. According to the analysis, the reason why the dart & tuck position and margin were rated low was confirmed. In a virtual wear assessment on jacket patterns by body shape, a significant difference was found in all categories, except for fit and shape at the front bottom, sleeve length on the side, and the center back line. The virtual wear assessment on the pants patterns by body shape also revealed a significant difference in all categories, except for pants length. In jackets, a significant influence was observed around the shoulders and waist in Type 1 and around the belly in Type 2. On the contrary, for pants, a significant influence was found around the hip and waist in Type 1 and around back crotch in Type 2. Therefore, they should be considered when making of jackets and pants. The above results suggested that jacket and pants patterns should vary depending on body shape. It is anticipated that there should be further studies comparing brand-name school uniforms for middle school girls and school uniforms by body shape.

A Study on the Application of 3D Digital Technology for Fashion Design (3D 디지털 기술을 활용한 패션 디자인 개발에 관한 연구)

  • Kim, Ji-Eon
    • Journal of the Korean Society of Costume
    • /
    • v.57 no.2 s.111
    • /
    • pp.45-58
    • /
    • 2007
  • This study shows that clothes are made just the same as the real thing in the virtual space through 3D digital technology. This study is significant to expand the area of fashion design in the virtual space. This study analyzes the practical use of the third dimension computer graphics in the aspect of fashion, and it is proposed the 3D fashion design simulation in the virtual space used on 3D studio max, poser, photoshop program according to fashion design process. The main design concept is "temporary bridge" from rainbow. "Temporary bridge" is a rainbow bridge which connects nature, man and technology, and also the past, present, and future. This study is supposed six fashion design in accordance with three sub-theme under main concept by changing rotor and texture used on 3D simulation. The conclusion are as follows : First fashion design process, which consists of design conceptualization, design definition, and computer design process, composed of body modeling, clothing modeling, texture mapping, rendering by lighting and camera establishing are compared. Second, fashion design process is applied to digital technology. Third, the method of body modeling is both that of direct modeling in 3D Studio Max and that of importing DXF file from poser. And the method of direct clothing modeling in 3D Studio Max are two methods, polygon modeling and nurbs modeling. Polygon modeling is more satisfied than nurbs modeling in the aspect of expression to clothing and round face. Forth, this study applies textures and colors transformed by photoshop on manufactured 3D Clothes. According to this result, fashion designers are able to confirm a customer or client in their design minds viewing 3D simulation by various textures. colors and angles. It is able to advance digital fashion show in the future.

A Study on Comparing Evaluation of External Appearance between Real and 3D Simulation of Flared Skirt Focused on Flare Volume and Length

  • Cha, Sujoung
    • Journal of Fashion Business
    • /
    • v.18 no.6
    • /
    • pp.38-56
    • /
    • 2014
  • This study compared the flared skirts on 3D simulation and in real to show diverse forms in women's clothing depending on the body's gait and motion. By finding the problems, we suggested the possible methods for utilizing the 3D simulation in the clothing industry. First, the 3D simulation of flared skirts showed similar forms of appearance according to the flare length and volume. However, virtually formed drape shape was even in size and spacing, whereas it was not even in real. Second, according to the results of appearance test on the length and flare volume at $90^{\circ}$ and $180^{\circ}$, both real and 3D simulation skirts were evaluated to have outstanding appearances regardless of the skirt length. However, as the flares volume increased, the skirts with longer length were evaluated to have superior appearances compared to the skirts of shorter length. Third, it showed higher resemblance between the real and virtual simulation, when the skirt had less flare and as the skirt length shortened. However, it showed greater difference between the real and virtual simulation when flare volume and length increased. The length and volume of the skirt and the physical properties of the material are predicted to be different between the real and virtual simulation. However, they usually are similar in forms, so it is believed possible to use for predicting the design's silhouette or the feel when it is worn. This method can be applied on internet shopping malls, which can possibly reduce unnecessary time and expenses.

Effect of Fabric Properties used for the Loop Type Decorative Elements on the 3-dimensional Shape

  • Ko, Youngmin;Kim, Jongjun
    • Journal of Fashion Business
    • /
    • v.17 no.3
    • /
    • pp.30-47
    • /
    • 2013
  • In the modern fashion industry, efficiency has been increasing thanks to development of computer graphics, IT technology, and digitalization. Unlike the past when fashion design heavily depended on handwork, digitalization of fashion industry makes fabrication time shorter and enables designers to adopt comprehensive expression, generating high value-added product. The Apparel CAD, an example of the digitalized fashion industry, has been developed from 2D system into a system providing 3D simulation. Digital clothing can be determined as an activity of designers using the tool in order to fabricate pattern and simulate its designed clothes in the virtual space of computer. In this study, physical properties of eight materials, which can be utilized on a par with current fashion trend, have been specified. For more sophisticated investigation, external appearance of the material was investigated by 3D scanning. In order to examine the physical properties of fabric specimens, KES(Kawabata Evaluation System) measurements and other physical property measurements were made. With the results, virtual material and clothes were simulated via CLO 3D, one of 3D apparel CAD systems. Then, virtual fabrics and clothes of similar types were generated and analyzed.

A Study on the Cases of the Application of 3D Apparel CAD System to the Domestic and Overseas Fashion Education (국내·외 패션교육에 있어서 3D 어패럴 CAD 시스템 활용 사례연구)

  • Lee, Min-Jeong;Sohn, Hee-Soon
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.35 no.9
    • /
    • pp.1112-1124
    • /
    • 2011
  • The development of computer graphics and Internet technology has created a 3D Web-based virtual world that has transformed the global fashion industry environment. In this study, the application cases of 3D virtual fashion education were analyzed to discuss the necessity and application of a 3D apparel CAD curriculum as part of a special education for global fashion talent at Korean fashion-related colleges. Prior studies, literature, photo data and Internet data (in and out of Korea) were used for this study. The demonstration case studies were conducted for the virtual fashion education 'SLCC 2007' of Buffalo State College (U.S.), 'Ratava's Line (2004)' of SFU/FIT Collaborative Design Project (Canada and U.S.) and '2011 Graduation Fashion Show' of Ueda Fashion College (Japan). The results of the study show that the 3D apparel CAD system (as a core technology of the IT fashion industry) would allow the current mass production concept to change to a new paradigm of 'mass customization' along with new fashion business types that include global fashion companies and Web-based Internet, mobile and virtual-world shopping malls. In addition, it appears that the system should be included in the curriculum of fashion-related colleges and institutes to educate technical designers for the global fashion industry and global fashion talent with comprehensive system operation and management ability, and to promote single proprietor companies.

A Study on i-Fashion 3D Avatar's Consumer satisfaction & Comparison of 3D and Direct Masurement - Based of Domestic University Students

  • Choi, Eunhee;Do, Wolhee
    • Fashion & Textile Research Journal
    • /
    • v.17 no.3
    • /
    • pp.421-428
    • /
    • 2015
  • This research is to understand customer satisfaction with virtual fitting based on a 3D body scanner and avatars as well as differences between avatars and the 'real me'. To this end, this research examined Korean college students to facilitate 3D body scanning, avatar generation and surveys. The author used 3D body scan data with direct measurements to identify differences between the 3D body scan data-based 'my avatar' and 'real me' in the virtual dress fitting system. The survey results on 'the level of customer awareness on 3D body scanner' found that the majority of both genders did not know about it and indicated a lower usability to incorporate IT technology into the fashion industry. The question in the 3D body scanning and avatar found an affirmative attitude. Satisfaction levels on the 3D avatars' similarity with 'own body' and garment fitting were positive and indicated a need for further technological improvements to express the avatars identical to customers' own body. More research is necessary for the accuracy of sizes for 3D body scanning that measure body sizes while wearing clothes. Avatars based on such datamay be less similar to 'own body' and cause customer dissatisfaction. Thus, further technology development is required to narrow gaps using data to make avatars that provide more accurate virtual fitting simulation services to customers.

Reproduction of 3D Virtual Wear of Sleeve-expanded Power Shoulder Jacket (소매확장 파워숄더 재킷의 3D 가상착의 재현)

  • Jeongah Park;Jeongran Lee
    • Fashion & Textile Research Journal
    • /
    • v.25 no.5
    • /
    • pp.593-602
    • /
    • 2023
  • This study aimed to facilitate the use of virtual technologies such as sewing, appearance, and material expression in 3D virtual wear programs. For product production and education, we expounded how to express the shoulder shape and silhouette of sleeve-expanded power shoulder jackets. Two designs of sleeve-expanded power shoulder jackets were selected, and virtual jackets were produced using a virtual avatar based on the body dimensions of female subjects in their 20s. The essential purpose of a 3D virtual power shoulder jacket is to express the shoulder angle rise and shoulder width, which are much wider than the avatar's shoulder. Therefore, the virtual pad values were adjusted for the collision and rendering of each thickness. In addition, the position and angle of the virtual pads were controlled through simulation. Appearance similarity was evaluated using photographic data and the virtual jackets. For the set-in sleeve virtual power shoulder jacket, the wrinkle expressions of the torso and sleeve were rated as moderate, and material expression was slightly insufficient. The similarity of some ease and width items of the torso was tightly expressed, and the overall appearance, positions of lines, and details of jackets were rated high, especially at the neck and sleeve shapes. In the case of the kimono virtual power shoulder jacket, the expressions of the torso wrinkles and buttons were slightly lower; however, the overall similarity, basic lines, ease, shoulder and neck details, and material expression of the virtual jackets were highly evaluated.

A Study on the Comparing about Young Plus Size Fashion Design Application on Plus Size Body Types Using 3D Virtual Garment Simulation - Focusing on USA Market - (영 플러스 사이즈 체형별 패션 디자인 가상착의 비교 연구 - 미국 시장을 중심으로 -)

  • Ryu, Jin-Young;Syn, Hye-Young;Lee, Inseong
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.16 no.3
    • /
    • pp.163-178
    • /
    • 2014
  • In America, where obesity rate ranks no.1 in the world, the plus size market is rapidly expanding with various American brands adding plus size lines in a way to diversify their products. As obesity is expanding throughout the younger generation, the necessity to develop products according to different characteristics of body shape that can fulfill the needs of young plus size consumers is being emphasized. In this study of young plus size, our focus is on providing wider spectrum of design choices for consumers by analyzing different body shapes, categorizing them, and then identifying the differences of design among them. More specifically, the object of this study is to analyze the elements that differentiate the designs from each other by virtually trying out the same item on avatars of various body shapes. Thus, we can identify the elements that needs to be differentiated according to different body shapes after implementing virtual fitting program on plus size shapes that are rather difficult considering the reality of domestic fashion companies. In this way, we are able to provide fundamental data for American plus size fashion market and design development for Korean fashion companies that are under way of entering or planning to enter the American market. Furthermore, this will demonstrate the actual details of the designs that will eventually help the development of specialized product for the globalization of Korean fashion industry.

  • PDF

A Comparative Study on Men's Bodice Slopers - Using a 3D Virtual Garment System - (성인 남성의 기본 상의 원형 비교 연구 - 3차원 가상착의 시스템을 이용하여 -)

  • Hong, Eun-Hee;Suh, Mi-A
    • The Research Journal of the Costume Culture
    • /
    • v.20 no.3
    • /
    • pp.403-415
    • /
    • 2012
  • This study did a comparative analysis on the patterns of several male bodice slopers, followed by evaluating the appearance through a virtual garment simulation, which used a three-dimensional virtual garment system. Through this process, this study attempted to comparatively analyze the suitability of the garment or each sloper according to body parts. The analysis of the drawing formulas of bodices slopers had the following results. With a standard chest size, all six slopers had a 1:4 ratio for a front and back chest size; 1:5 or 1:6 for a front and back breast size 1:5 or 1:4 for a neck base circumference; and 1:20 or 1:12 for the chest size. When comparing the anthropometric figures and the actual measurements of each body part for the bodice slopers, the actual measurements secured extra amounts in the drawing process. The evaluation results for appearance of the six men's bodice slopers showed that the slopers used by companies (E and F) had top scores followed by the slopers made for (C and D), while the sloper for education (A) received the lowest scores. Regarding the results of the variance analysis verifying the significant difference between the slopers, twenty-five items had significant differences with the exception of four items on the front side and one item on the backside.

A Study on the Ease in Jacket Bodice Pattern for Abdomen-obese Middle-aged Men from Virtual Appearance Evaluation (가상착의 평가에 따른 복부비만 중년남성의 재킷 길 원형 여유량 설정)

  • Lim, Ji-Young
    • Fashion & Textile Research Journal
    • /
    • v.12 no.6
    • /
    • pp.789-795
    • /
    • 2010
  • The purpose of this study was to examine the appropriate surplus of clothing for a jacket bodice pattern of middle-aged obese men by using the 3D virtual twin and virtual garment simulation system. The results were as follows ; 1. BMI rate of middle-aged males was 28.13 which was equivalent to mild obesity, whereas WHR(W/H ratio from waist to hips) rate was near 1.00 which was highly dangerous against their obesity. In case of middle-aged obese men, the WHR was significantly higher than the entire middle-aged men's average and the section shape in which their thickness was relatively more than width. 2. As a result of appearances evaluation through virtual garment simulation, the cut-off amount of the side seam and the center back was regulated accordingly. Hereby, the final tolerance range was set up at 21.15 cm at the hips, so that the appearances became better and the bilateral distribution of the cross section and space length was formed symmetrically. Especially in case of increasing the cross amount of hems to produce a natural silhouette of the waist-to-hips parts, the ease of buttocks was judged to be moderate, but it turned out that a wavy cross section was made and the silhouette was not good. Thus it was found to be not good that the ease of the hips became excessively increased in proportion as circumference of waist and belly were increased in obesity. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.