• International Journal of Computer Science & Network Security
• /
• v.21 no.3
• /
• pp.219-228
• /
• 2021

The adoption of new technology in any organization will represent change, and such change needs user acceptance for its successful implementation. Saudi Arabian health centers are no exception; therefore, the current study will investigate the adoption of new technology, namely that of virtual reality (VR), within health centers in Saudi Arabia and specifically in Riyadh City. This study explores the current state of VR technology adoption, factors that influence such adoption, and the extent of this technology's efficiency when it is used for vaccinating children. The data were collected from two samples: workers in vaccination clinics who responded to a survey and a group of children who participated in the VR technology experiment. The current study proposed a model based on the unified theory of acceptance and use of technology 2 (UTAUT2), with the addition of two variables: personal innovativeness and satisfaction. The results indicated that the respondents' perceptions regarding the health centers' infrastructure in terms of adopting VR were moderate. Among the factors affecting VR adoption, satisfaction, personal innovativeness, and behavioral intention were identified as vastly influential factors. From the eight hypotheses, six were found to be supported, with their factors significantly influencing behavioral intention with regard to VR technology adoption. Besides, the experiment concerning the use of VR technology on children verified the technique's high efficiency in terms of providing pain management and fear removal. These findings support the continuity of VR technology use, expand its future application fields, and integrate this study into the literature on technology acceptance models for VR adoption, as limited studies have covered this topic; consequently, this will benefit future research in this field.

• KIEAE Journal
• /
• v.11 no.5
• /
• pp.13-18
• /
• 2011

The overall aim of this study is to mitigate urban environmental problems. In particular, to reduce the effects of urban heat island phenomenon which is one of the urban planning perspective. This study focused on the analysis of the relationship between the urban heat island effect and the thermal and wind properties. To do this analysis, water space was virtually made at Yeol_Mae village Apt. Because it is very difficult to set up water space for the existing apartment complexes due to realistic constraints. This study, therefore has a strong sort of guidelines to create water space for newly formed city. It was based on the concept of virtual city through an in-depth analysis on reduction of urban heat island effects for the existing apartment along with creation of water space. To analysis site, Envi-Met Model developed by Michael Bruse was used. The results are as follows. The temperature went from 298.9K to 297.82K and The wind speed went from 1.42m/s to 1.43m/s. The results are slight in this study because creation of water space is planned to a small area of an apartment complex. But if the water space would be applied to a whole city, the mitigation effect of urban heat island would be bigger.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.78-88
• /
• 2016

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In design phase, especially, collaboration based on BIM system has being a key factor for successful next generation building project. Through the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. In various industrial fields, cloud computing technology is utilized as a promising solution which can reduce time and cost of hardware infrastructure. Among the cloud computing technology, VDI is receiving a great deal of attention from it market as an essential part cloud computing. VDI enables to host multiple individual virtual machines by using hypervisor. It has an advantage to easy main device management. Therefore, this study implements a step-by-step user's DaaS by analyzing the desktop resource data of the workers from Pre-design phase to Schematic design, Design develop and Construction design phase. It also develops BIM environment based on test of BIM modeler and designers in architectural design firm. The goal of the study is to enable the cloud computing BIM server. It provides cost saving, high-performance quality of working environment and cooperation's convenience and high security when doing BIM work in small and medium sized architectural design firm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.161-168
• /
• 2010

This study aims to propose a method that shall rapidly acquire 3D information of the fast and frequently changing city areas by using the images taken by the UAV photogrammetric method, and to develop the process of the acquired data. For this study's proposed UAV photogrammetric method, low-cost UAV and non-metric digital camera were used. The elements of interior orientation were acquired through camera calibration. The artificial 3D model of the artificial structures was constructed using the image data photographed at the target area and the results of the ground control point survey. The digital surface model was created for areas that were changed due to a number of civil works. This study also analyzes the proposed method's application possibility by comparing a 1/1,000 scale digital map and the results of the ground control point survey. Through the above studies, the possibilities of constructing a 3D virtual city model renewal of 3D GIS database, abstraction of changed information in geographic features and on-demand updating of the digital map were suggested.

• Journal of Digital Convergence
• /
• v.8 no.1
• /
• pp.71-79
• /
• 2010

Impact of online social network to cyber community has increased much attention recently. The biggest challenge in fostering a social network is to the extent whether it helps to build human capital network or social community. We propose what critical factors influence the formation of online capital network. The study uses three independent factors as motivation, self disclosure, and interactivity and two dependent factors as knowledge sharing and strengthening relationships to create virtual capital connection. Data collected from 256 university students to test the proposed model. The results of the study shows that all hypothesis are supported except one with strengthening relationship. Implications and limitations of this research are discussed.

• International Journal of Contents
• /
• v.18 no.2
• /
• pp.32-46
• /
• 2022

In recent years, large-scale and high-density use of LED on facades has exposed some disadvantages, such as light pollution, high energy consumption, unsustainability, and poor interactivity. Because of the development of smartphones and augmented reality (AR), AR has emerged as a new technology available to users to interact with the media façade. As an augmented reality app for public space, the AR map app can superimpose virtual images on the surface of a building to form an AR media façade, which can be applied in the fields of navigation, advertising, interactive public art, smart retail, etc. This study establishes the variables influencing usage intention and the consequent outcomes of Huawei AR map app and uses the technology acceptance model (TAM) to discuss their relationship. Results show that consumer innovativeness, information quality, and design quality have a strong influence on perceived ease of use. Information quality has a positive impact on perceived usefulness, but design quality has a weak influence. Also, the design quality of Huawei AR map app and consumer innovativeness have a higher effect on perceived enjoyment than information quality. Users' usage attitude and perceived usefulness when using Huawei AR map app are key factors determining their usage intention. This study inspires city planners, architects, developers, and designers of AR apps that augmented reality can partly replace media façade, and that investment in augmented reality will achieve significant sustainable economic and social benefits.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.70-74
• /
• 1999

Remote sensing (RS) data show the surfaces of the earth only but cannot provide the shape data of building sides. The proposed method recovers a 3D shape of building sides from stereo images. Its result shows a higher possibility for recovering a large shaped object by overcoming the difficulties of traditional stereo matching techniques. The urban area will be visualized more realistically than the current model based on graphic and vector data.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.633-636
• /
• 2004

Airborne laser scanning thechnology has been studied in many applications, DSM(Digital Surface Model) development, building extraction, 3D virtual city modeling. In this paper, we will evaluate the possibility of airborne laser scanning technology for transportation application, especially for recognizing moving vehicles on road. First, we initially segment the region of roads from all LiDAR DATA using the GIS map and intensity image. Secondly, the segmented region is divided into the roads and vehicles using the height threshold value of local based window. Finally, the vehicles will be classified into the several types of vehicles by MDC(Minimum Distance Classification) method using the vehicle's geometry information, height, length, width, etc

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.328-333
• /
• 2003

GIS기술은 실세계의 분석에서부터 3D 가상도시의 구축까지 매우 빠르게 발전하고 있다. 3D가상도시는 GIS 기술, 컴퓨터그래픽스 기술, 가상현실 기술, 데이터베이스 기술에 의해 컴퓨터 속에 구현이 되는 도시를 말한다. 본 연구에서는 1/1,000 수치지도를 이용하여 3D건물모델을 형성하였고, 건물모델을 형성할 때는 삼각형 메쉬를 형성하고 최적의 메쉬를 형성하기 위하여 Divide and Conquer 알고리즘을 사용하였다. 메쉬가 형성된 수치지도의 건물모델에 대하여 기존의 기하파이프라인을 개선함으로서 건물모델을 빠르게 렌더링할 수 있도록 하였다. 건물측면에 대하여는 디지틀 카메라를 이용하여 측면에 대한 이미지를 취득하고 2D Projective Transformation을 적용하여 이미지를 조정하였다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.505-507
• /
• 2003

This paper describes techniques for the automated creation of geometric 3D models of the urban area us ing two 2D laser scanners and aerial images. One of the laser scanners scans an environment horizontally and the other scans vertically. Horizontal scanner is used for position estimation and vertical scanner is used for building 3D model. Aerial image is used for registration with scan data. Those models can be used for virtual reality, tele-presence, digital cinematography, and urban planning applications. Results are shown with 3D point cloud in urban area.