• Journal of Multimedia Information System
• /
• v.7 no.3
• /
• pp.221-230
• /
• 2020

Used optimization techniques as solution for mobile network have been implemented as a reference systems for various applications against fading and signals perturbation, in addition each transition to 5th generation telecommunication standards require a deep studies in order to park an applied instantaneous process. The paper describes a preliminary planning and a careful preparation to update both subscriber radio access network as well as data transmission network this approach conducts to make network resource updates invisible for customers and with minimal costs for mobile operators basically in terms of delay. In addition, network operators transit to mobile networks, multimedia services efficient delivery are considered the challenging application and the most promising for mobile network operators today, this work conduct to optimize video consumption of mobile users which are exponentially increasing. The interference is a complex phenomenon in mobile radio telecommunication system, and a mobile phone can be a source of interference to another one. Actual advances in technology necessitate the need for the complicated software solution that can take several unexpected phenomena in consideration to rise to a level higher than ever. The capability needs today require the use of Drive test which is used to take the performance of network in the field by using a special software called TEMS investigation, it have been implemented as standalone systems for various applications. The paper focuses on considering as the best technical for optimization of mobile networks, analysis and processing of signal, a Drive Test is the method used to take the performance of network in the field by using a special software called TEMS investigation. Most used in the world, this software is reputed to detect and analyze many problems of mobile network between the mobile phone and the transmitter: BTS in case of GSM and Node B for UMTS. An example of that is interference in radio communication. It exists permanently and it degrades considerably the quality of received signal when it exceeds certain levels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12B
• /
• pp.1017-1027
• /
• 2006

Recently, Internet service providers are offering triple play service which combines voice and video services with the existing high speed Internet service under the common network infrastructure of IP protocol, so that they can create more benefit from operating a single network architecture. In line with this movement in the convergence of network and services, in this work we propose a bandwidth dimensioning method for the subscriber network of the IP network at flow level. To that purpose, let us propose a series of bandwidth dimensioning methods: bandwidth for best effort service only, bandwidth dimensioning for premium services, and bandwidth dimensioning schemes for the premium Internet services as well as the best effort service which comprise the TPS. Our link dimensioning method is based on the flow level that incorporates the flow blocking probability as a measure of grade of services(GoS), and investigates the characteristics of the proposed methods via extensive numerical experiments. After that, let us carry out a simulation experiment concerning the delay and loss performance of the packet scheduling for the premium services (QoS) using the bandwidth designed by our proposed method, via which the packet level quality of service (QoS) for the proposed link dimensioning method can be observed.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.30-35
• /
• 2007

H.264/AVC provides better quality than other algorithms by using a deblocking filter to remove blocking distortion on block boundary of the decoded picture. However, this filtering process includes lots of memory accesses, which cause delay of overall decoding time. In this paper, we propose a data-reuse algorithm to speed up the process for the deblocking filter. To reuse the data, a new filtering order is suggested. By using this order, we reduce the memory access and accelerate the deblocking filter. The modeling of proposed algorithm is compiled under ARM ADS1.2 and simulated with Armulator. The results of the experiment compared with H.264/AVC standard are achieved on average 58.45% and 57.93% performance improvements at execution cycles and memory access cycles, respectively.

• Journal of Digital Contents Society
• /
• v.3 no.1
• /
• pp.47-57
• /
• 2002

Recently, wireless networks have been pursuing multimedia data service as voice, data, image, video and various form of data according to development of information communication technology. It guarantees cell delivery delay of real time data in efficient real time multimedia data transfer. Also, it minimizes cell loss rate of non-real time multimedia data. In the wireless ATM, there are based on Asynchronous Transfer Mode(ATM). It implies that there are various service with difficult transmission rates and qualities in the wireless communication network. As a result, it is important to find out the ways to guarantee the Quality of Service(QoS) for each kind of traffic in wireless network. In this thesis, we propose an improved TCRM scheduling algorithms for transmission real-time multimedia data service in wireless ATM Networks. We appear real time multimedia scheduling policy that apply each different method to uplink and downlik to wireless ATM network. It can guarantee QoS requirements for each real time data and non-real time data. It also deals the fairness problem for sharing the scarce wireless resources. We solve fault of TCRM as inefficient problem of non-real data by using arbitrary transmission speed and RB(Reservation Buffer) through VC(Virtual Control) and BS(Base Station).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.176-190
• /
• 2019

The prevention of pedestrian accidents in crosswalks and intersections is very important. The C-ITS services provide a warning service for preventing accidents between cars and pedestrians. In the current pedestrian collision prevention warning service according to the C-ITS standard, however, it is difficult to provide real-time service because it detects pedestrians from a video-analysis server in the control center and sends service messages through the ITS system. This paper proposes a pedestrian collision-prevention warning system that detects pedestrians in the local field using an edge camera and sends a warning message directly to the driver through a roadside unit. An evaluation showed that the proposed system could deliver the pedestrian collision prevention-warning message to the driver satisfying the delay time within the 300 ms required by the C-ITS standard, even in the worst case.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.203-210
• /
• 2013

Majority of the wireless ad hoc routing protocols are proposed to find feasible routes without considering the network load, end-to-end link quality and bandwidth requirements of the application. Therefore, protocol may not provide sufficient quality of service (QoS) to a high speed traffic such as multimedia. In this paper, we propose a path-quality and bandwidth-estimation based routing protocol (PBBR) for the high quality multimedia stream that can meet the application's bandwidth requirements and find the best reliable route. The novelty of this protocol is to select a reliable path to respond the application's requirements based on available bandwidth at each intermediate node and end-to-end path loss ratio. Obtained results from the simulation demonstrates that our protocol can achieve sufficient performance in terms of throughput and end-to-end delay.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.313-324
• /
• 2005

The success of the IEEE 802.11 standard has prompted research into efficiency of the different medium access methods and their support for different traffic types. A modified version of the point coordination function (PCF) called modified PCF has been introduced as a way to improve the efficiency over the standard method. It has been shown through a simulation study and a mathematical analysis that channel utilization can be much improved compared to the standard, in case there is no so-called hidden station problem. However, under the hidden station problem, the efficiency of the modified PCF would obviously decrease. In this paper, some enhancements of the modified PCF are introduced. Firstly, we propose a retransmission process to allow frames involved in collisions to be retransmitted. Then, we propose a collision resolution mechanism to reduce the frame collision probability due to the hidden station problem. In addition, we propose a priority scheme to support prioritization for different traffic types such as interactive voice and video, and real-time data traffic in the modified PCF. To prevent the starvation of one low priority traffic, minimum transmission period is also guaranteed to each traffic type via an admission control algorithm. We study the performance of the modified PCF under the hidden station problem and the performance of the modified PCF with priority scheme through simulations. To illustrate the efficiency of the priority scheme, we therefore compare its simulation results with those of some standardized protocols: The distributed coordination function (DCF), the enhanced distributed channel access (EDCA), the PCF, and our previously proposed protocol: The modified PCF without priority scheme. The simulation results show that the increment of delay in the network due to the hidden station problem can be reduced using the proposed collision resolution mechanism. In addition, in a given scenario the modified PCF with priority scheme can provide better quality of service (QoS) support to different traffic types and also support a higher number of data stations than the previous proposals.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.101-109
• /
• 2011

In this paper, we present a new routing protocol, multipath and multi-priority based routing protocol, (MMRP) for wireless multimedia sensor networks. The proposed MMRP chooses the multiple routing paths from source to the sink, then the selected paths are assigned with different priority levels depending upon the residual energy and transmission delay in the routing paths. That is, the highly prioritized I frames of the MPEG video are transmitted over the high priority routing paths, and other P and B frames are transmitted over the lower priority routing paths. The proposed MMRP protocol can be applied to time critical applications which require both lower latency and low power consumption over wireless multimedia sensor network. Simulations results of MMRP protocol show respectively an improvement of 23.48% and 23.11% in energy conservation and 81.6% and 32.01% improvement in latency as compared to protocols without and with multipath routing.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.36-45
• /
• 1998

This paper discusses multiple access control aspects for a wireless extension of high-speed asynchronous transfer mode(ATM) networks. One challenging requirement is that mobile systems convey of diverse types of information including voice, computer data, facsimile, and video data that have different quality of service constraints. Basically, a centralized control scheme for a coordinated multiple access is required in order to efficiently accommodate multimedia traffic on wireless links. The proposed scheme dynamically scheduling the mobile terminal, which has data to transfer according to the service, types at base station. In this scheme, the scheduling algorithm is performed on the basis of traffic descriptors and QoS parameters, which required in the connection set up phase. As a consequence, the transmission scheduling is very flexible and can account for the different traffic rate and delay constraints that emerge from voice and data integration. The simulation result shows that the proposed scheme has better performance over other scheduling algorithms.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.34-43
• /
• 2008

An OpenLDI receiver circuit for flat-panel display systems was designed and fabricated using $1.8-{\mu}m$ high-voltage CMOS technology. Designed circuit roughly consists of DLL circuit and parallelizers, which recovers clock and parallelize data bits, respectably. It has one clock input and four data inputs. Measurement results showed that it successfully recovers clock signal from input whose frequency is $10Mhz{\sim}65Mhz$, which corresponds data rate of $70Mbps{\sim}455Mbps$ per channel, or $280Mbps{\sim}1.82Gbps$ when all of the four data channels were utilized. A commercial LCD monitor was modified into a test-bench and used for video data transmission at clock frequency of 49Mhz. In the experiment, power consumption was 19mW for core block and 82.5mW for output buffer.