• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.91-95
• /
• 2004

In this paper, we propose a fuzzy controller for the evaluation of the quantization parameters in the H.263 coder. Our method adopts the Mamdani method for fuzzification and adopts the centroid method for defuzzification respectively. The inputs are variance, entropy in the spatial domain, current motion vector and previous motion vector in the temporal. Fuzzy variables are determined to be compatible in visual characteristics and fuzzy membership function is induced and then, FAM banks are designed to reduce the number of rules. In this paper, fuzzy quantization has been applied to a practical video compression. This results show that the quality of decode image enhances and the rate control method using fuzzy quantization is effective.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.77-83
• /
• 2012

In this paper, a low-complexity embedded compression (EC) Codec algorithm for the wavelet video coder is applied to reduce excessive external memory requirements. The EC algorithm is used to achieve a fixed compression ratio of 50 % under the near-lossless-compression constraint. The EC technique can reduce the 50 % memory requirement for intermediate low-frequency coefficients during multiple discrete wavelet transform stages compared with direct implementation of the wavelet video encoder of this paper. Furthermore, the EC scheme based on a forward adaptive quantization and fixed length coding can save bandwidth and size of buffer between DWT and SPIHT to 50 %. Simulation results show that our EC algorithm present only PSNR degradation of 0.179 and 0.162 dB in average when the target bit-rate of the video coder are 1 and 0.5 bpp, respectively.

• Journal of Broadcast Engineering
• /
• v.7 no.4
• /
• pp.327-334
• /
• 2002

This paper addresses an efficient loop filter algorithm to improve visual quality by simultaneously reducing blocking and ringing artifacts in H.26L video coder. H.26L video coding standard using the different coding mechanism to existing video coding standards has different distribution of blocking and ringing artifacts that is dependent on coding type, quantization step size, and motion vector. Therefore, the information is used to define the filter type and the filter coefficients. and a projection operator is defined to avoid the over-smoothness. In addition, in order to avoid over-smoothing coming from filtering processing, a constraint projection operator is defined. Since the above information is available both in encoder and in the decoder, a loop filter is used, and the algorithm is simplified to reduce the computational cost. Experimental results show the capability of the proposed algorithm.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.66-69
• /
• 2000

In this paper, we propose a progressive transmission of a video using a 2$\times$2$\times$2 DCT First of all, the video data is transformed into multiresolution represented video data using a 2$\times$2$\times$2 DCT. Then. it is represented by a 3-D EZT(Embedded Zero Tree) coding fur the progressive transmission with a bit-rate scalability. The proposed progressive transmission algorithm needs much less computations and buffer memories than the higher-order convolution based wavelet filter. Also, since the 2$\times$2$\times$2 DCT requires independent local computations, parallel processing can be applied.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.323-324
• /
• 2007

In this paper, we present the method of skipping the quantization for fast video encoding. Based on the theoretical analyzes for the integer transform and quantization in H.264 video coder, we can derive a sufficient threshold under which each quantized coefficient becomes zero. In addition, in order to reduce the complexity of the fast video encoding, complexity is improved, leading to improvement of total encoding time saving for given threshold. The simulation results show the capability of the proposed algorithm.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.221-230
• /
• 2015

Rateless codes have been shown to be able to provide greater flexibility and efficiency than fixed-rate codes for multicast applications. In the following, we optimize rateless codes for unequal error protection (UEP) for multimedia multicasting to a set of heterogeneous users. The proposed designs have the objectives of providing either guaranteed or best-effort quality of service (QoS). A randomly interleaved rateless encoder is proposed whereby users only need to decode symbols up to their own QoS level. The proposed coder is optimized based on measured transmission properties of standardized raptor codes over wireless channels. It is shown that a guaranteed QoS problem formulation can be transformed into a convex optimization problem, yielding a globally optimal solution. Numerical results demonstrate that the proposed optimized random interleaved UEP rateless coder's performance compares favorably with that of other recently proposed UEP rateless codes.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.31-40
• /
• 2005

In this paper, we develop an approach toward JSC(Joint Source-Channel Coding) method for MPEG-4 based FGS(Fine Granular Scalability) video coding and transmission in fixed and mobile receiving environment(Digital Audio Broadcasting, DAB). The source coder used MPEG-4 FGS video codec, the channel coder used RCPC(Rate Compatible Punctured Convolution) code and the modulation method used QPSK modulation. We have considered channel environment of AWGN and mobile receiving environment. This study determined optimum Trade-off point between source bit rate and channel coding rate in variable channel states. We compared FGS-JSC method and general single layer CBR(Constant Bit Rate) transmission. In this results, FGS-JSC was appeared better performance than CBR transmission.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1219-1228
• /
• 1995

In this paper, we propose a dynamic bandwidth allocation scheme for the transmission of VBR video source through ATM based BISDN. In order to efficiently evaluate the required bandwidth, the characteristics of the VBR video sources generated by the MPEG coder are analyzed with variations in the number of GOP and quantizer scale. The required bandwidth for VBR video source is estimated by a prediction algorithm using scene and frame correlations as well as the statistical properties of the VBR video source. Scene correlation represents a strong correlation among the adjacent slices in a frame, and frame correlation represents a strong correlation among the frames. The statistical properties based on the traffic parameters of video sources such as peak rate, average rate, and standard deviation of source are determined through simulation. The performance of the proposed bandwidth allocation scheme is evaluated in terms of the over-allocated bandwidth, bandwidth utilization, and cell loss rate with variations in the quantizer scale and the number of GOP. It is shown that the results of simulation based on the proposed scheme are superior to those of the conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1132-1140
• /
• 1996

In video coding systems, an effective rate control method is one of the most improtant issues for the good video quality. This paper presents an adaptive rate control scheme based on the buffer fullness, quantization, and buffer utilization for very low bit rate communication lines, such as 16kbit/s, 24bit/s, and so on. The strategy is implemented on H.263, whichis a vide coding algorithm for narrow band telecommunication channels up to 64kbit/s recommended by ITU-T SG15, to show the effectiveness. The simulation result shows that the suggested rate control scheme has better SNR performance and buffer utilization of source coder than those of linear and non-linear[9] buffer control strategies.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.56-61
• /
• 2005

In this paper, we present a video rate control scheme for storage and delivery in which the time-varying viewing interests are controlled by human gaze. To track the gaze, the pupil's movement is detected using the three-step process : detecting face region, eye region, and pupil point. To control bit rates, the quantization parameter (QP) is changed by considering the static parameters, the video object priority derived from the pupil tracking, the target PSNR, and the weighted distortion value of the coder. As results, we achieved human interfaced visual model and corresponding region-of-interest rate control system.