• 전자공학회논문지 IE
• /
• 제47권4호
• /
• pp.18-27
• /
• 2010

본 논문은 회전체의 진동 데이터를 효율적으로 획득하기 위해 데이터 획득 시스템을 설계하였다. 데이터획득 장치는 필터와 증폭기로 구성한 아날로그 로직과 ADC와 DSP, FPGA, FIFO 메모리를 갖고 있는 디지털로직으로 구성하였다. 센서로부터 회전체의 진동신호는 아날로그 로직을 통과하여 FPGA에 의해 제어되고, 그 신호는 ADC를 통해 변환되고 FIFO 메모리에 저장하였다. 디지털 선호 처리는 FPGA 제어어의해서 FIFO 메모리에 들어온 데이터를 이용하여 DPS에서 신호처리를 수행할 수 있도록 구성하였다. 회전체 진동을 진단 및 분석하기 위한 진동 요소는 데이터 선호로서 실수 변환, Peak to Peak, 평균 값 산출, GAP, 디지털 필터, FFT 둥을 DSP에서 처리하고 설정된 이벤트를 추적하며, 그 결과 값을 도출하여 조기 경보 구축하였다 묘든 신호처리 과정 및 이벤트 추적은 여러 분석 단계 의해서 처리 시간이 소요되며, 특정 이벤트에 따라 처리 소요 시간에도 변동이 발생한다. 데이터 획득 및 처리는 연속적으로 실시간 분석을 수행해야 하지만, DSP에서는 입력된 신호를 처리하는 동안에 입력된 이후의 데이터에서 다음 입력처리 시간동안 획득한 데이터는 처리 될 수 없고, 특히 다수의 채널에서는 더 많은 데이터 손실이 일어날 수 있다. 따라서 본 논문에서는 데이터 손실이 적고 빠른 처리를 위하여 DPS와 FPGA을 효과적인 사용하였고, 이러한 여러 분석 단계 신호처리에서 발생되는 시간을 최소한으로 줄일 수 있는 방법으로 DSP에서 처리되는 신호단계 중 일부를 FPGA에서 처리할 수 있도록 설계 하였고 그리고 단일의 신호 처리에 의해 수행되는 분석 단계를 병렬 처리로 데이터를 실시간으로 처리하였다. 그 결과로 DSP 만으로 구성된 신호처리 보다 DSP와 FPGA로 구성된 시스템이 훨씬 빠르고 안정된 신호 처리 방법을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.303-305
• /
• 2014

This paper is concerned with the vibration measurement of cable by image processing technique. The measurement system consists of a CCD camera and zoom lens. The image data can be transferred to PC via USB or IEEE1394 port. In this study, a Matlab program was made to process the acquired image data. After acquiring an image data for each frame, this data is binarized for tracing cable vibrations. Then the area occupied by the cable is marked by 1 and the background is covered by 0. In this way, we can calculate the displacement of the cable. Experimental results show that the tracing of cable displacements is possible and natural frequencies and mode shapes can be computed. The accuracy of the image processing system for vibration measurement depends on the maximum frame rate of the CCD camera. The use of a high-speed camera enables us to compute more higher modes. The laboratory experiments guarantee the vibration measurement of real transmission lines.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.114-120
• /
• 2007

Vibration performance of a 6 kW stand-alone wind turbine(W/T) generator is investigated under the wind environment of Daegwanryung mountain area. In the W/T, wind condition, power performance and structural stability are correlated each other An integrated monitoring system which consists of accelerometers, anemometers, power meters and auxiliary sensors for atmospheric data are constructed to measure the required data simultaneously. Based upon the data acquired over a long period of time, vibration performance of the W/T structure is estimated with annual wind data and generating power performance. Within the operating speed range, possibility of severe nitration is diagnosed. Vibration sources are identified and countermeasures are proposed. The goal of the study is to offer the basic information on W/T vibration performance at the design stage of a small stand alone W/T structure.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.71-77
• /
• 2022

In times of war or emergencies, weapon systems, such as radars, must receive stable power. This can be achieved using improved onboard portable power systems made of steel containers. However, a breakdown can occur in the event of random vibration during transportation via a vehicle or train. Electrical-power shortages or restrictions pose a significant threat to security. In this study, Composite Wheeled Vehicle(CWV) data and rail cargo data with Acceleration Spectral Density(ASD), specified in MIL-STD-810H METHOD 514.8, were interpreted as input data of the three-axis random vibration method using ANSYS 19.2. Modal analysis was performed up to 500 Hz, and deformations in modes 1 to 117 were calculated to utilize all ASD data. The maximum equivalent stress in the three-axis direction was obtained using a random vibration analysis. Similarly, the margin of safety was calculated using the derived equivalent stress and material properties. Overall, the analysis verified that the portable container designed for the power supply system satisfied the required vibration demands.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.195-196
• /
• 2005

We report the new design of a miniature electromagnetic actuator for probe-based data storage with anti-vibration mechanism. The actuator consists of a media substrate, silicon frame, 2 pairs of magnets, a spacer, and a printed circuit board (PCB). The total area of the device is $11.2{\times}11.2 mm^2$ while the data recording area is $7.4{\times}7.4 mm^2$. A net momentum fee structure was included for high vibration resistance. The simulation shows that the lateral vibration can be reduced to below 100 nm for 1 G acceleration if the counter mass is adjusted with $1\%$ difference. The peak power for ${\pm}50 {\mu}m$ displacement is below 50 mW for a actuator with a resonance at 200 Hz.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.422-430
• /
• 1996

The automated scanning laser Doppler vibrometer (LDV) has been designed, and built to measure in-plane displacements associated with waves propagating on vibrating structures. Use of optical fibers allows the compact design of a laser probe head which can be scanned over the vibrating structures. An algorithm for automated self-alignment of the laser probe is developed. The system is completely automated for scanning over the structures, focusing two laser beams at each data point until the detected vibration signal is stable, and for recording and transferring the data to a system computer. The automated system allows one to get extensive data of the vibration field over the structures. The system is tested by scanning a piezoelectric cylindrical shell and a plate excited by a continuous signal and by a pulse signal, respectively. Results show that the automated scanning LDV system can be a useful tool to measure the in-plane vibration field and to detect the elastic waves propagating on the vibrating structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.797-800
• /
• 2006

The power flow analysis(PFA) can be effectively used to predict structural vibration in medium-to-high frequency ranges. In this paper, vibration experiment has been performed to observe the analytical characteristics of the power flow analysis of the vibration of a plate. In the experiment, the loss factor of the plate and the input mobility at a source point have been measured. The data for the loss factor has been used as the input data to predict the vibration of the plate with PFA. The frequency response functions have been measured over the surface of the plate. The comparison between the experimental results and the predicted results for the frequency responsefunctionshasbeenperformed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.816-820
• /
• 2003

The objective of this paper is to develop an experimental technique to measure the in-plane vibration intensity of a plate. In order to measure the in-plane vibration intensity at a data point, the frequency response functions for the 2 components of an acceleration vector are measured at each point of 4 points in the neighborhood of the data point. This experimental technique has been implemented to measure the in-plane vibration intensity of a plate. The experimental result has been compared with a theoretical result. It showed that the experimental technique can be effectively used to measure the in-plane vibration intensity of plates.

• 한국소음진동공학회논문집
• /
• 제11권5호
• /
• pp.108-122
• /
• 2001

As bridge design is advancing toward the performance-based design. it becomes increasingly important to monitor and re-evaluate the long-term structural performance of bridges. Such information is essential in developing performance criteria for design. In this research. sensor systems for long-term structural performance monitoring have been installed on two highway bridges. Pre1iminary vibration measurement and data analysis have been performed on these instrumented bridges. On one bridge, ambient vibration data have been collected. based on which natural frequencies and mode shapes have been extracted using various methods and compared with those obtained by the preliminary finite element analysis. On the other bridge, braking and bumping vibration tests have been carried out using a water truck In addition to ambient vibration tests. Natural frequencies and mode shapes have been derived and the results by the breaking and bumping vibration tests have been compared. For the development of a three dimensional baseline finite element model, the new methodology using a neural network is proposed. The proposed one have been verified and applied to develop the baseline model of the bridge.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.869-874
• /
• 2001

In order that precision equipment using high precision industrial operate normally. vibration criteria of expected area that equipment be set up is micrometer level. that method is a trust design for apply to in field, when there attend to quantifiable method. Hence, semi -empirical method that using on the basis of experimental data about undefined information (properities of vibration source, dynamic properities of structure, etc.,) for prediction of vibration response make the use of dynamic structure design of semiconductor ＆ TFT-LCD in the inside and outside country. Like this, for doing an optimal design of dynamic about structure, it is best important to get trust data that apply to semi-empirical method that is method of prediction vibration level. In this paper, on the basis of experimental data which was offered by a manufacturing company Of precisin equipment that plan to set up in semiconductor factory, we predicted vibration response on expected area that equipment be set up.