• Journal of Information Technology Services
• /
• v.11 no.2
• /
• pp.19-47
• /
• 2012

Contemporary smartphone competition is generally described as the battle between Apple's proprietary platform and Google's open platform. However, this competition is not limited within smartphone adoption itself. User's pre-adoption of one mobile platform via smartphone can be connected to the post-adoption of the same mobile platform based on the other smart devices (e.g. smart pad). In this study, we investigate whether user's preference to a certain platform is persistent over mobile ecology, from the pre-adoption of one smart device to the post-adoption of following devices. For this investigation, we adopt the dual-model as the ground theory, where post-adoption of IT product is explained by both dedication and constraint factors. The empirical testing first evidences that dual model works well as our research model for identifying the reasons of post-adoption. Next, we group our data into two parts in order to compare the switching behavior of iPhone users and Android phone users. iPhone users show much lower switching rate to Android based smart pads, while Android phone users show higher churn rate to iPad (49.3% : 96.3%). Especially, satisfaction showed much stronger effect than switching cost on the continuing intention of existing platform, when the analysis is given to the iPhone user's group. From this result, we can conjecture the relatively stronger loyalty of iPhone users. More managerial implications on the mobile platform strategy are driven.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.4 s.33
• /
• pp.1-5
• /
• 2004

A multi-layer flexible substrate is composed of copper(Cu)/polyimide that are known as good electrical conductivity, and low dielectric constant, respectively. In this study. conductor line of $5{\mu}m$-pitch was successfully fabricated without non-uniform pattern shape by electroplating copper and coating polyimide on patterned stainless steel. For multi-layer flexible substrate, via holes were drilled by UV laser and filled with electroplating copper and tin. And then, the PI layer with vias and conductor lines was stripped from stainless steel substrate. The PI layers were laminated at once with careful alignment between layers. Solid state reaction between tin and copper during lamination formed the intermetallic compounds of $Cu_6Sn_5$($\eta$-phase) and $Cu_3Sn$($\epsilon$-Phase) and achieved a complete inter-connection by vertically positioning the plugged via holes on via pad. The via formation process has several advantages; such as better electrical property and lower cost than V type via and paste via.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.83-91
• /
• 2021

In this study, to improve the connection performance between the existing reinforced concrete (R/C) frame and the strengthening member, we proposed a new H-section steel frame with elastic pad (HSFEP) system for seismic rehabilitation of existing medium-to-low-rise reinforced concrete (R/C) buildings. This HSFEP strengthening system exhibits an excellent connection performance because an elastic pad is installed between the existing structure and reinforcing frame. The method shows a strength design approach implemented via retrofitting, to easily increase the ultimate lateral load capacity of R/C buildings lacking seismic data, which exhibit shear failure mechanism. Two full-size two-story R/C frame specimens were designed based on an existing R/C building in Korea lacking seismic data, and then strengthened using the HSFEP system; thus, one control specimen and one specimen strengthened with the HSFEP system were used. Pseudodynamic tests were conducted to verify the effects of seismic retrofitting, and the earthquake response behavior with use of the proposed method, in terms of the maximum response strength, response displacement, and degree of earthquake damage compared with the control R/C frame. Test results revealed that the proposed HSFEP strengthening method, internally applied to the R/C frame, effectively increased the lateral ultimate strength, resulting in reduced response displacement of R/C structures under large scale earthquake conditions.

• Acta Via Serica
• /
• v.7 no.2
• /
• pp.39-64
• /
• 2022

Ancient Iranians highly esteemed the horse and horse tacks, one of which is the jul (saddlecloth). It is a felt, sheepskin, or woven pad placed between the horse's back and saddle. The aim of this paper is to identify and categorize jul designs in the Sāsānian period. The research questions are about the variety of jul designs and how to categorize them. This is fundamental research and the method is descriptive and analytical. Neither a jul nor a saddle-cover remains from the Sāsānian period, therefore the statistical population includes all available items, such as metal and stone items and parget and plasterworks, in which juls are recognizable. Due to the scarcity of such items, all the available samples were studied; so the sampling method is a total enumeration. This is documentary research by means of note-taking and using reliable websites; the data has been analyzed qualitatively. The results show that jul designs were not diverse in the Sāsānian period. All-over designs were dominant. In terms of pattern types, these designs are classified into five groups, each of which has its own formal and aesthetic characteristics: all-over design with a four-petal flower pattern, allover design with a checkered pattern, all-over design with a spotted pattern, allover design with a tiger stripe pattern, and all-over design with a zigzag pattern.

• Journal of Biosystems Engineering
• /
• v.26 no.1
• /
• pp.21-28
• /
• 2001

Major deficiencies of current automation scheme including various robots for bioproduction include the lack of task adaptability and real time processing, low job performance for diverse tasks, and the lack of robustness of take results, high system cost, failure of the credit from the operator, and so on. This paper proposed a scheme that could solve the current limitation of task abilities of conventional computer controlled automatic system. The proposed scheme is the man-machine hybrid automation via tele-operation which can handle various bioproduction processes. And it was classified into two categories. One category was the efficient task sharing between operator and CCM(computer controlled machine). The other was the efficient interface between operator and CCM. To realize the proposed concept, task of the object identification and extraction of 3D coordinate of an object was selected. 3D coordinate information was obtained from camera calibration using camera as a measurement device. Two stereo images were obtained by moving a camera certain distance in horizontal direction normal to focal axis and by acquiring two images at different locations. Transformation matrix for camera calibration was obtained via least square error approach using specified 6 known pairs of data points in 2D image and 3D world space. 3D world coordinate was obtained from two sets of image pixel coordinates of both camera images with calibrated transformation matrix. As an interface system between operator and CCM, a touch pad screen mounted on the monitor and remotely captured imaging system were used. Object indication was done by the operator’s finger touch to the captured image using the touch pad screen. A certain size of local image processing area was specified after the touch was made. And image processing was performed with the specified local area to extract desired features of the object. An MS Windows based interface software was developed using Visual C++6.0. The software was developed with four modules such as remote image acquisiton module, task command module, local image processing module and 3D coordinate extraction module. Proposed scheme shoed the feasibility of real time processing, robust and precise object identification, and adaptability of various job and environments though selected sample tasks.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.204-209
• /
• 2016

The analyses on self-heating effect in 7 nm node non-rectangular Bulk FinFET device were performed using 3D device simulation with consideration to contact via and pad. From self-heating effect simulation, the position where the maximum lattice temperature occurs in Bulk FinFET device was investigated. Through the comparison of thermal resistance at each node, main heat transfer path in Bulk FinFET device can be determined. Self-heating effect with device parameter and operation temperature was also analyzed and compared. In addition, the impact of interconnects which are connected between the device on self-heating effect was investigated.

• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.757-766
• /
• 2015

Recent technological advancements, along with an increase in mobile Internet access, have spurred on significant developments in the production of e-textbooks. This case study explored the affordances of an iPad e-textbook through teacher and student experiences in English lessons using observation and interviews. The results showed that English learners and teacher benefited from handy and quick web access and the all-in-one features of the e-textbook (dictionary, hyperlinks, and note-taking functions). However, information oversupply by the e-textbook confused students' learning and both students and teacher pointed out technical difficulties in using the e-textbook. In order to implement English pedagogy with technologies such as iPad e-textbooks, teachers should be equipped with the relevant technical skills and content knowledge in order to assist them in becoming autonomous learners in the digital classroom.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.491-497
• /
• 2005

Brake system is indispensible functional part to the transportation machines such as railroad cars, and all of industrial machines. It is mechanical element to stop the movement or slow the speed, transforming kinetic energy of motion object into thermal energy through solid friction. According that recently the railroad cars have become high-speed, the technique in braking domain to secure the overall braking effort is making rapid progress. In particular, material development and manufacturing process are so important to secure friction performance, which is the core in braking performance of mechanical brake units. Wear of brake disk could mainly result in the diminishment of its life span due to thermal cracking, so the endurance against high temperature is required. On the other hand, in this case, the problem is that the side wear of pad, relative material is slightly increased because of enlargement of plastic deformation. It is necessary, therefore, to develop a disk material that will be used in the Tilting System mechanical brake units. The purpose of this paper is to make a study prior to developing brake disk of Tilting Train travelling at 200km/h and to propose the component of brake disk. Accordingly, I will conduct sufficient researches on technical documents of brake disk, that are basic documentations, analyze an impact on components, and further, considering braking degree of train, study for the basic proposal on brake disk's component of the train travelling at 200km/h, which has relatively minor influence of heat stress and maintains the friction. In this respect, I would like to investigate friction characteristics between disk and relative friction material via Test on some possible test segments, analyze and propose friction performance, temperature impact and so forth coming from the contact with pad, relative material to demonstrate the friction characteristics.

• Science of Emotion and Sensibility
• /
• v.18 no.3
• /
• pp.93-106
• /
• 2015

In accordance with escalating demands for advanced technology products, the smart clothing that includes embedded ICT technology have expanded into fields of daily life. As a result of this trend, interest in smart clothing with digitally controllable heating has rapidly grown and the market for smart heated clothing has also expanded. Increasing of prospect in smart heated clothing market, the effectiveness and thermal sensation research of the location on the pad attached is insufficient. This study was conducted to find the optimal location of heated clothing via experimental research on changes in skin temperature and subjective thermal sensation when heating pads were placed on different areas of the body. For this experiment, the subjects consisted of 10 males in their 20's of standard physique. The skin temperature at 11 different areas of the body, rectal temperature, and subjective thermal sensation were taken at different stages (before testing, after a 20 minute rest period, 20 minute treatment period, and after a 40 minute recovery period) in an artificial-climate chamber at $-5^{\circ}C$. As a result, the optimal location for heating pads in smart clothing was estimated and suggested.

• Archives of Plastic Surgery
• /
• v.39 no.5
• /
• pp.452-456
• /
• 2012

Background Phosphatidylcholine (PPC) and deoxycholate (DCA) compound has been recently used for the purpose of partial lipolysis and is valued for its efficacy and lower invasiveness compared to liposuction and dermolipectomy used previously. In this article, the authors discuss the efficacy of the PPC dissolved in DCA via an experimental rat study model, along with suggesting a useful animal experimental model for the study of adipose tissue and lipolysis. Methods Bilateral inguinal fat pads of an experimental rat were elevated with the deep inferior epigastric vessel as the sole vascular pedicle. Normal saline was injected on one side as a control group and a PPC and DCA compound was injected on the other side. After 4 days, the rats were euthanized for microscopic tissue examination. The pathology was scored by a sem-iquantitative system in 4 categories: normal fat amount, fat necrosis, inflammatory activity, and stage of fibrosis. A Wilcoxon signed-rank test powered by SPSS packet program was used for statistical analysis and to determine significance. Results Microscopic examination was performed on the obtained samples, and the experimental data of all four categories showed significant histologic differences compared to the control group. All of the data also showed statistical significance by the Wilcoxon signed-rank test (P<0.01). Conclusions In the inguinal fat pad rat model, the control group and the experimental group had a differed significantly in the amount of normal fat tissue, inflammation, necrosis, and fibrosis. We recommend the rat inguinal fat pad model used in this study, as it is likely to be useful in related research.