• International Journal of Vascular Biomedical Engineering
• /
• 제2권1호
• /
• pp.25-30
• /
• 2004

Catheters are used to measure translesional pressure gradients in the stenosed coronary arteries. Uses of catheters during coronary angioplasty cause flow obstructions. A narrowed flow cross section with catheter effectively introduced a tighter stenosis than the enlarged residual stenoses after balloon angiplasty. Catheters in blood vessels cause pressure gradient rise and blood flow drop during the measurements. In this study, three dimensional computer simulations are conducted to investigate the flow blockage effects due to the catheter obstructions during the coronary angioplasty. The computer simulation models are generated by the data, which are measured by coronary angiogram, and the blood is treated as non-Newtonian fluid. The velocity, pressure, and wall shear stress variations are observed for the estimate of damages of blood vessel. This study is also extended to investigate the effects of stenotic vessel size, and shape and catheter size and location.

• 한국지리정보학회지
• /
• 제5권4호
• /
• pp.86-92
• /
• 2002

고해상도 위성 IRS-1C의 Panchromatic 영상 자료를 이용하여 한국 근해에서 선박의 수와 위치를 파악할 수 있는 가능성을 살펴보았다. Panchromatic 위성 영상에서 선박과 주변환경에 대한 위치, 크기, 모양, 그림자, 색조, 질감 및 모양의 공간배열, 높이와 깊이, 현황 및 연관성 등의 영상해석 요소를 활용하여 선박 모니터링의 논리적 접근기법을 연구하였다. 선박의 공간적 위치는 GCP가 없는 해상에서 영상의 중심위치 정보로부터 반경 35km내에서 지구좌표점으로 전환하였다. 선박의 크기는 선수에서 선미까지이나 선미에서 생기는 종파(following wave)와 추정 구분하여야 했다. 길이 100m를 기준으로 연근해 어선과 상선으로 구분하였다. 선박의 모양은 종파의 영향으로 영상에서 유선형이었다. 작은 구름의 경우 선박의 모양과 유사했으나, 해상에 반영된 구름의 그림자로 배와 구분할 수 있었다. 색조는 바다표면이 검은색을 띤 반면 소형선박은 밝은 흰색으로 나타났다. 바다의 거친 정도와 파도의 방향성 배열 등을 통해 파도와 선박을 구분하였다. 또한 쌍끌이 어선과 같은 조업방법이 어선의 어업별 종류를 영상에서 추정하는데 용이한 기초 연관 자료가 되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권3호
• /
• pp.123-134
• /
• 2006

본 연구에서는 해상교량의 선박충돌 해석을 위한 설계선박을 결정하기 위한 선박충돌 위험도 분석을 수행하였다. 확률기반 해석과정을 포함하는 Method II를 이용하여 선박충돌 위험도 해석결과로부터 선박충돌에 대한 설계선박을 선정하였다. 계산연간파괴빈도와 허용기준을 반복 비교하는 해석과정에서는 연간파괴빈도 허용기준의 분배방법이 포함된다. 주탑집중 분배방법이 주탑에 비해 과대평가되는 교각의 설계 수평내하력을 적절히 수정할 경우에는 보다 경제적인 결과를 가져오지만, 교량부재의 중요도를 고려한 가중치에 의한 분배방법이 설계인자의 특성들을 정량적으로 고려하기 때문에 보다 합리적인 것으로 보인다. 선박충돌에 노출된 교각 각각에 대한 선박충돌위험도 평가로부터 교량의 대표 설계선박이 선정되었다. 설계선박은 같은 교량에서도 선박통행량 특성에 따라 많은 차이가 있다.

• 수산해양기술연구
• /
• 제55권2호
• /
• pp.162-171
• /
• 2019

This study is aimed to develop an improved shellfish dredge vessel considering the increase of the fishing safety and welfare of fishermen in Jeonnam province. We visited five fishing village societies in Korea, and conducted field surveys and survey questions to investigate the current status. In order to solve the problems presented by the investigation, a general arrangement of the improvement vessel was written and adopted after meeting between the fishermen and research team, and calculated the initial stability in five loading conditions by using the Napa program. As a result of field surveys and survey questions, the existing vessel have buoyant materials under the bow and the warp pass through the wheel-house. In addition, most fishing equipment and nets are concentrated on a narrow stern, making it difficult to work efficiently. According to the survey, fishermen also responded that operation of casting and hauling is very inconvenient. The fishing equipment of the improvement vessel was rearranged, the size of the wheel-house and the crew room was increased, and we secured a basic welfare space. As a result of the initial stability test, the stability criteria of the fishing vessel were satisfied in all loading condition.

• 한국정보통신학회논문지
• /
• 제16권11호
• /
• pp.2538-2543
• /
• 2012

관상동맥 중재술은 카테터를 통해 협착부위에 스텐트를 삽입하여 치료를 할 수 있는 대표적 검사방법이다. 중재술의 시행에 있어 어려운 점으로는 다양한 스텐트의 종류로 인해 스텐트의 선택에 어려움이 있다. 때문에 협착부위의 혈관 폭을 정확히 측정하여 시술자로 하여금 알맞은 크기의 스텐트를 선택할 수 있도록 도움을 줄 수 있어야 한다. 따라서 본 연구에서는 사용자가 지정한 지점에서 혈관의 중심선을 그린 후, 유클리드 거리 측정법을 이용하여 혈관의 폭을 측정하여 혈관의 폭을 픽셀기반의 프로파일로 나타내었다. 본 실험은 시술자로 하여금 알맞은 크기의 스텐트를 선택할 수 있는 참고자료로 활용될 수 있을 것으로 사료된다.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.77-83
• /
• 2014

The vessel of integral reactor contains its major primary components such as the fuel and core, pumps, steam generators, and a pressurizer, so its size is proportional to the required space for the installation of each component. The steam generators take up the largest volume of internal space of reactor vessel and their volumes is substantial for the overall size of reactor vessel. Reduction of installation space for steam generators can lead to much smaller reactor vessel with resultant decrease of overall cost for the components and related facilities. A printed circuit heat exchanger is one of the compact types of heat exchangers available as an alternative to conventional shell and tube heat exchangers. Its name is derived from the procedure used to manufacture the flat metal plates that form the core of the heat exchanger, which is done by chemical milling. These plates are then stacked and diffusion bonded, converting the plates into a solid metal block containing precisely engineered fluid flow passages. The overall heat transfer area and pressure drops are evaluated for the steam generator based on the concept of the printed circuit heat exchanger in this study. As the printed circuit heat exchanger is known to have much larger heat transfer area density per unit volume, we can expect significantly reduced steam generator compared to former shell and tube type of steam generator. For the introduction of new steam generator, two design requirements are considered: flow area ratio between primary and secondary flow paths, and secondary side parallel channel flow oscillation. The results show that the overall volume of the steam generator can be significantly reduced with printed circuit type of steam generator.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.31-34
• /
• 2005

This article has investigated the spatial distribution of the solid particles in polymerization reactors using CFD analysis (FLUENT v. 6.2.1). The suspension of the solids in stirred reactors is affected by a number of parameters including particle diameter, vessel shape, impeller size, impeller speed, and rotating direction of stirrer. The degree of solids suspension in the vessel was quantified with a statistical average value, ${\sigma}^2$. The best stirring conditions were determined based on ${\sigma}^2$, which was found to depend on the vessel bottom shape.

• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.645-652
• /
• 2003

A virtual vessel traffic control system is introduced to contribute to prevent a marine accident such as collision and stranding from happening. Existing VTS has its limit. The virtual vessel traffic control system consists of both data acquisition by satellite remote sensing and a simulation of traffic environment stress based on the satellite data, remotely sensed data And it could be used to provide timely and detailed information about the marine safety, including the location, speed and direction of ships, and help us operate vessels safely and efficiently. If environmental stress values are simulated for the ship information derived from satellite data, proper actions can be taken to prevent accidents. Since optical sensor has a high spatial resolution, JERS satellite data are used to track ships and extract their information. We present an algorithm of automatic identification of ship size and velocity. It lastly is shown that based on ship information extracted from JERS data, a qualitative evaluation method of environmental stress is introduced.

• 소성∙가공
• /
• 제14권7호
• /
• pp.613-618
• /
• 2005

The paper is concerned with the process design and the die design for manufacturing the preform of a large pressure vessel. The cold-working processes are introduced to improve the fatigue strength and to simplify the manufacturing process. By the finite element simulation, the parameter design is carried out, which is subjected to constraints such as the blank sire, press capacity and other minor limitations. The proposed design results are verified by the model experiments, in which the model is scaled down to one tenth of the original size.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.214-215
• /
• 2005

Naval equipments are installed and used for naval vessel with different environmental conditions comparing to the commercial vessel, for example, high engine power per ship displacement size, severe vibration and shock due to high running speed and explosion from naval gun's bombardment and underwater weapons. Therefore, those equipments must be installed on shipboard with small spaces, high ambient temperature around engine room and which are required be fabricated with high resistances of vibration, shock and heat resources. But in case of commercial vessel, the performances of their recent equipments naval have been improved continuously due to the technology development of domestic shipbuilding and shipboard equipment industries, together with the related fundamental industries i.e, metal, steel and electronic industries, to an international level since 1970. With these results, it became possible to unify the specifications of shipboard equipments for the commercial and military vessels(Dual-Use). In this study, vibration and shock test standards for the commercial and military vessels will be compared and reviewed technically.