• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.63-69
• /
• 1998

This study was carried out to get some basic information on mechanical properties of Korea Lepidobalanus for rational utilization of wood. Five species of Quercus variabilis, Q. aliena, Q. serrata, Q. mongolica, Q. acutissima belong to Lepidobalanus were investigated in this research. Relationship of anatomical characteristics to compression strength parallel to grain was analyzed using stepwise regression technique. All possible combination of 21 independent variables were regressed on compression strength parallel to grain. The summarized results in this study were as follows: I. In the proportion of wood structural elements, the factors that had the greatest influence on compression strength parallel to grain appeared to be proportion of ray in earlywood in Q. variabilis and Q. acutissima, proportion of wood fiber in latewood in Q. aliena and Q. serrata and proportion of vessel in earlywood in Q. mongolica respectively. 2. In the size of wood element and its structure, the factors that had the greatest influence on compression strength parallel to grain were microfibril angle in Q. variabilis, Q. serrata and Q. mongolica and length of wood fiber in Q. aliena and Q. acutissima.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.1-7
• /
• 2006

Anatomical and physical properties of kenaf grown in Chuncheon, Korea were investigated using light and scanning electron microscopy and X-ray diffraction method. Bast fiber, phloem ray, cortex parenchyma cell and sieve tube member were observed in phloem, and vessel element, fiber and ray in xylem. Solitary and multiple radial pores in xylem existed. The cell types of ray parenchyma in radial section were procumbent, upright and square cells. The length of bast fiber increased with increasing the growth period. The length of wood fiber was 0.74~0.82 mm, but was not significantly different between the growth period and stem height. Relative crystallinity was 53~74% in phloem and 43~58% in xylem. Cellulose crystallinity width was 2.68~3.24 nm in phloem and 2.46~2.95 nm in xylem. The green moisture content and green density increased but basic density decreased with increasing the stem height.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.532-540
• /
• 2017

This paper suggests study of basic structure design and structural analysis for the twin car-ferries. The rules and methodology for the strength analysis of medium and small sized high speed vessels with a length of more than 50m and a length/width ratio of more than 12, such as car-ferries, have not been clarified yet. Therefore, in this paper, the members scantling were carried out using the KR Rule, and the car-ferry exclusive vessel standard were further applied to verify the structural strength the design. The scantling of the members is based on the Korea Classification standards, and the car-ferries standards were additionally applied to verify the structural strength of the design. Especially, the ultimate strength of hull girder was additionally carried out by using car-ferry exclusive vessel standard, and proposed to overcome ambiguity of design by existing standard. The results of this study are expected to be useful as basic data related to structural design and structural analysis of high speed twin-hull car-ferries. The present car-ferry design has a sufficient safety margin in strength point of view according to the KR rule.

• Journal of Sericultural and Entomological Science
• /
• v.18 no.2
• /
• pp.89-93
• /
• 1976

The physiological saline solution for animals is known as Ringer's solution which is used for keeping the function of cold blooded vertebrate animals. Primaily the saline solution is used for the purpose of perfusion experiment in frogs. Later the saline solution is applied in several kinds of animals including human being with satisfactory results. However, this saline solution was introduced to silkworm and it was found that the result was not as successful as in the case of other animals and human being. Normally, in the case of silkworm, the physiological saline solution is prepared in order to maintain the normal function of separated organs and tissues. To this end, the saline solution is adjusted to contain the certain amount and strength of ions, osmosis pressure and hydrogen concentration. The most of cases, the physiological saline solution should be prepared so that the constituent of the solution be the same with the blood selium and body fluid. The hydrogen concentration in the ion element of the saline solution is adjustable by adding Na$\^$＋/, K$\^$＋/, Ca$\^$＋＋/, Mg$\^$＋＋/ which are followed by adding of buffer solution such as NaHCO$_3$and NaH$_2$PO$_4$. Determination of optimum concentration of cation in the physiological saline solution, and the optimum mixing rate of more than two kinds of cations are based on the movement of dorsal vessel in the silkworm larvae. The optimum concentration of cations in the solution is prepared by adding NaCl solution which is under zero point. However, this solution was further added with the different concentration of KCl and CaCl$_2$. By dropping the prepared solution on the 5th larvae, the effects of solution was measured. The measurement was done by observation of movement' of dorsal vessel and its time length, and the number of pulses. According to the experiment, it was found that when only NaCl solution was applied, the number of pulses is increased for a moment, and the pulse stopped after one hour or so. When KCl solution was added the time of pulse was prolonged and in the contrast, the number of pulses was slow down. If KCl and CaCl$_2$solutions are added the time of pulse was further prolonged. Even though the adding of KCl and CaCl$_2$are found to be effectible, the correlation between the concentration of solution and the movement of dorsal vessel was not observed. However, it was same in the case of adding Ca$\^$＋＋/ or K$\^$＋/. It was found that when Mg$\^$＋＋/ was added to dorsal vessel the number of the pulses was not decreased although the prolonged time pulse was observed.

• Journal of Plant Biology
• /
• v.36 no.4
• /
• pp.345-355
• /
• 1993

Anatomical study of the secondary xylem in Araliaceous plants, induding 7 genera and 11 species grown in Korea, was carried out to elucidate the relationship among genera in the family. Wood of Hedera has difbse porous and shows ulmiform pattern of angular vessels, simple perforation plate, and alternate pitting. In addition, its ray is homogeneous type II with only procumbent ray cell. Ring porous wood of Dendropanax shows ulmiform of angular vessels, simple perforation plate, alternate pitting, and heterogeneous type II ray, which has sometimes horizontal secretory cavity. Fatsia has diffuse porous wood, which shows ulmiform of angular vessels, scalariform perforation plate (3-9 bars), scalariform pitting, spiral thickening in the lateral wall of vessel, and heterogeneous type II ray with sheath cells. Kalopanax has ring porous wood, which shows ulmiform of circular vessels, simple perforation plate and alternate pitting, and heterogeneous type II ray. While K pictum appears tylose with septum, K pictum var. maximowczii appears tylose without septum. Echinopanax shows ring porous wood, ulmiform of angular vessels, simple perforation plate, scalariform pitting, and tylose with septum. And the ray of Echinopanax is paedomorphic type I composed of only upright cells. Acanthopanax genus is composed of diffuse porous wood, ulmiform of angular vessels, simple perforation plate and alternate pitting. In this genus, A. sessiliflorus has heterogeneous type II ray, apotracheal axial parenchyma and tylose with septum. A. senticosus appears paedomorphic type I with only upright cells, and tylose with septum. A. koreanum and A. sieboldianum have heterogeneous type II ray but have not tylose. Aralia is composed of ring porous wood, ulmiform of circular vessels, simple perforation plate, alternate pitting, heterogeneous type II ray, and tylose contained both septum and reticulate. On the basis of arrangement, shape, length and diameter of vessel element, the angle of end wall to vessel axis, and ray type, the line of specialization in these genera is as follow: from Fatsia, the most primitive, to the most highly specialized Aralia, throughout Hedera, Acanthopanax, Echinopanax, Dendropanax, and Kalopanax by turns. turns.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.26-52
• /
• 1987

Among the diffuse-porous woods which arc dominant in Korea and used as construction materials due to their wood quality, ten species of six genus involving seven species of three genus in Betulaceae were studied on the radial variation of structural demenb. The species studied were Betula platyphylla var. japonica, B. ermanii, B. davurica, B. scstata, B. schmidtii, Carpinus laxifora, Alnus japonica, Prunus sargentii. Acer mono and Diospyros kaki. Wood fiber, vessel elements and ray increased rapidly in size from pith to a certain annual ring. After then the radial variation in size of the main structural elements seemed to be divided into three types; levelled off curve pattern indicating constant size(type I), continuously increasing curve pattern showing ever increase in size (type II) and parabolic curve pattern showing the gradual decrease after the maximum (type III), but the variation types by structural dements were different even in the same species. Based on the results from this study, it appears to be reasonable to consider the stabilized age of wood fiber, vessel elements and ray rather than considering wood fiber length in distinguishing mature woods from juvenile woods.