• 제목/요약/키워드: very early strength

검색결과 188건 처리시간 0.03초

EFFECT OF FIR FLUXES ON CONSTRAINING PROPERTIES OF YSOS

  • Ha, Ji-Sung;Lee, Jeong-Eun;Jeong, Woong-Seob
    • 천문학회지
    • /
    • 제43권6호
    • /
    • pp.213-223
    • /
    • 2010
  • Young Stellar Objects (YSOs) in the early evolutionary stages are very embedded, and thus they emit most of their energy at long wavelengths such as far-infrared (FIR) and submillimeter (Submm). Therefore, the FIR observational data are very important to classify the accurate evolutionary stages of these embedded YSOs, and to better constrain their physical parameters in the dust continuum modeling. We selected 28 YSOs, which were detected in the AKARI Far-Infrared Surveyor (FIS), from the Spitzer c2d legacy YSO catalogs to test the effect of FIR fluxes on the classification of their evolutionary stages and on the constraining of envelope properties, internal luminosity, and UV strength of the Interstellar Radiation Field (ISRF). According to our test, one can mis-classify the evolutionary stages of YSOs, especially the very embedded ones if the FIR fluxes are not included. In addition, the total amount of heating of YSOs can be underestimated without the FIR observational data.

콘크리트 양생 강도 모니터링을 위한 매립형 지능형 센서의 적용성 연구 (A Study on Applicability of Embedded Smart Sensor for Concrete Curing Monitoring)

  • 박승희;김동진;홍석인;이창길
    • 콘크리트학회논문집
    • /
    • 제23권2호
    • /
    • pp.219-224
    • /
    • 2011
  • 이 논문은 고강도 콘크리트의 양생 강도 발현을 모니터링하기 위하여 콘크리트 내부에 매립이 가능한 지능형 센서를 제작하고 제작된 지능형 센서를 이용하여 콘크리트 내부의 유도 초음파 전달 시간을 측정함으로써, 콘크리트의 양생 강도를 실시간 추정할 수 있는 기법을 보여준다. 압전 소자를 콘크리트 내부에 삽입하는데 있어, 콘크리트의 수화열과 양생 시의 미세 변형으로부터 보호되어야 하므로, 방수 코팅과 모르타르 케이싱을 하였으며 이렇게 제작된 지능형 센서로부터 저비용의 셀프 센싱 기반 유도 초음파를 계측하여 콘크리트 내부의 유도 초음파 전달 시간을 모니터링하는 기법을 제안하였다. 콘크리트의 양생이 진행됨에 따라 콘크리트의 강도가 증가하게 되는데, 이는 즉 콘크리트의 탄성 계수가 증가하기 때문이며 이로 인해, 유도 초음파의 전달 시간이 빨라지는 것이므로, 이를 측정하여 콘크리트 양생 강도를 추정할 수 있게 된다. 제안된 기법의 적용가능성을 검증하기 위하여 설계 압축강도 100 MPa의 공시체 내부에 지능형 센서를 매립하고 양생기간 동안 유도 초음파를 측정, 비교 분석하였다. 유도 초음파 신호는 양생이 진행됨에 따라 더 빠르게 전달되었으며, 특히 강도 변화가 급격하게 일어나는 초기 재령에서의 유도 초음파 전달속도 변화가 가장 크게 나타났고 그 이후로 점차 감소하는 경향을 보여주었다. 또한, 유도 초음파 전달 시간과 강도 사이의 선형 상관관계를 이용하여 유도 초음파의 전달 시간을 이용해 발현강도를 추정하는 콘크리트 양생강도 추정식을 제안하였다. 결과적으로 이 연구를 통해 개발된 매립형 지능형 센서를 이용하여 고강도 콘크리트의 양생 강도를 실시간 모니터링할 수 있음이 검증되었다.

초속경 라텍스개질 콘크리트로 보강된 RC보의 비선형 휨해석 (Nonlinear Flexural Analysis of RC Beam Rehabilitated by Very-Early Strength Latex-Modified Concrete)

  • 최성용;윤경구;김용빈;강문식
    • 한국산학기술학회논문지
    • /
    • 제11권11호
    • /
    • pp.4635-4642
    • /
    • 2010
  • 라텍스로 개질된 콘크리트는 높은 휨강도 뿐만아니라 부착강도 및 투수저항성이 좋은 재료특성을 제공한다. 이러한 이점을 활용한 초속경 라텍스개질 콘크리트(VES-LMC)에 관련된 연구결과는 재료에 관한 것이 대부분으로, VES-LMC로 덧씌우기 보강된 RC 보의 부착 경계면 거동특성에 대한 체계적인 연구는 미진하다. 따라서 본 논문에서는 VES-LMC로 보강된 철근콘크리트 보의 비선형 휨 거동에 대한 특성을 알아보고자 ABAQUS를 매개변수 연구를 수행한 결과 다음과 같은 결과를 얻을 수 있었다. 비선형 휨 해석을 위하여 본 논문에 적용된 모델의 적합성 여부를 확인한 결과 실험값과 비교적 유사한 경향을 보이는 것을 확인 할 수 있었다. 두께가 증가함에 따라 최대 저항강도가 증가하는 경향을 보여주었으며, 또한 강성 이 증가하여 내하력이 증진되는 결과를 확인할 수 있었다. 부착강도를 변수로 해석한 결과, 전단강도가 증가함에 따라 휨 저항능력이 향상되는 결과를 확인 하였으며, 두 이질재료의 부착능력이 구조물의 내하력에 지배적인 인자로 작용하는 것을 알 수 있었다.

Evaluation of Air Void System and Permeability of Latex-Modified Concrete by Image Analysis Method

  • Jeong, Won-Kyong;Yun, Kyong-Ku;Hong, Seung-Ho
    • International Journal of Concrete Structures and Materials
    • /
    • 제19권1E호
    • /
    • pp.41-48
    • /
    • 2007
  • Addition of latex to concrete is known to increase its durability and permeability. The purpose of this study is to analyze air void systems in latex-modified concretes using a reasonable and objective method of image analysis with such experimental variables as water-cement (w/c) ratios, latex contents (0%, 15%) and cement types (ordinary portland cement (OPC), high-early strength (HES) cement and very-early strength (VES) cement). The results are analyzed by spacing factor, air volume (content) after hardening, air void distribution and structure. Additionally, air void systems and permeability of latex-modified concrete (LMC) are compared by a correlation analysis. The results are as follows. The LMC of the same w/c ratio showed better air entraining (AE) effect than OPC with AE water reducer. The VES-LMC showed that the quantity of entrained air below $100{\mu}m$ increased more than four times. For the case of HES-LMC, microscopic entrained air between the range of 50 to $500{\mu}m$ increased greater than 7 times even in the absence of anti-foamer. Although spacing factor was measured rather low, the permeability of latex-modified concrete was good. It is construed that air void system does not have a considerable effect on the property of latex-modified concrete, but latex film (membrane) has a definite influence on the durability of LMC.

Durability and mechanical performance in activated hwangtoh-based composite for NOx reduction

  • Kim, Hyeok-Jung;Park, Jang-Hyun;Yoon, Yong-Sik;Kwon, Seung-Jun
    • Advances in concrete construction
    • /
    • 제11권4호
    • /
    • pp.307-314
    • /
    • 2021
  • Activated hwangtoh (ACT) is a natural resource abundant in South Korea, approximately 15.0% of soil. It is an efficient mineral admixture that has activated pozzolanic properties through high-temperature heating and rapid cooling. The purpose of this study is to improve a curb mixture that can reduce NOx outside and investigate durability performance. To this end, mortar curb specimens were manufactured by replacing OPC with ACT. The ACT substitution ratios of 0.0, 10.0, and 25.0% were considered, and mechanical and durability tests on the curb specimens were conducted at 28 and 91 days of age. Steam curing was carried out for three days for the production of curbs, which was very effective to strength development at early ages. The reduction in strength at early ages could be compensated through this process, and no significant performance degradation was evaluated in the tests on chloride attack, carbonation, and freezing and thawing. The mortar curb with an ACT of 10.0~25.0% replacement ratio exhibited clear NOx reduction through photocatalytic (TiO2) treatment. This is due to the increase in physical absorption through surface absorption and the photocatalyst-containing TiO2 coating. In this study, the reasonable range of the ACT replacement ratio for NOx reduction was quantitatively evaluated through a comprehensive analysis of each test.

징의 타격 위치와 강도에 따른 음향 분석 (Acoustic Analysis of a Jing Based on Drive Point and Blow Strength)

  • 조상진
    • 한국음향학회지
    • /
    • 제34권4호
    • /
    • pp.328-334
    • /
    • 2015
  • 본 논문은 다양한 타격 강도와 위치에 따른 징의 음향 차이를 소프닝과 맥놀이 분석을 통해 살펴본다. 타격 강도는 아주 강하게, 강하게, 약하게로 구분하였고 타격 위치는 가운데, 위, 오른쪽으로 구분하였으며 분석에는 스펙트로그램을 사용하였다. 소프닝은 징의 가운데를 강하게 타격할수록 명확하게 관측되었고 주파수 이동 폭은 타격 강도와 주파수에 비례하였다. 이러한 현상은 배음에서 두드러졌으며 다른 부분음에서는 불규칙적으로 발생하였다. 맥놀이는 초기 맥놀이와 후기 맥놀이로 분류할 수 있었으며 가운데를 타격할 때보다 측면을 타격할 때 더 넓은 주파수 대역에서 더 많은 맥놀이가 발생한다는 것을 알 수 있었다. 또한 가운데를 타격한 경우 초기 맥놀이에 영향을 주는 배음 주변의 성분들이 있음을 밝혔다.

한중콘크리트 시공시 표면 단열재 변화에 따른 콘크리트의 온도이력 특성 (The Properties of Temperature History of Concrete with Surface Insulating Material in Cold Weather Concreting)

  • 문학용;신동안;김경민;김기철;오선교;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2003년도 학술.기술논문발표회
    • /
    • pp.7-11
    • /
    • 2003
  • This study investigate the hydration heat history with variation of surface insulating material in cold weather concreting. According to the results, the temperature of concrete lowers below zero in 24hours, so early frost damage occurs in the case of exposure and 1 fold bubble sheet, but the lowest temperature keeps above zero, so a adiabatic effect is very favorable in the case of double bubble sheet and 부직포. Compressive strength of core specimen at 7 and 28 days is highest In the case of double bubble sheet and 부직포. But, considering convenience of construction and economical efficiency, it is thought that the most effective surface insulating material is 1 fold bubble sheet +blanket.

  • PDF

흑색 VES-LMC의 현장적용성 평가 (Field Application Evaluation of Black VES-LMC)

  • 정원경;길용수;김용빈;윤경구
    • 한국도로학회논문집
    • /
    • 제13권1호
    • /
    • pp.177-183
    • /
    • 2011
  • VES-LMC(Very-Early Strength Latex Modified Concrete)는 콘크리트의 내구성 향상에 기여하는 SB라텍스를 첨가한 신속개방형 보수보강재로서로 교면재포장 및 콘크리트포장 보수에 적용되고 있다. 그러나 VES-LMC의 밝은 색상은 운전자에게 시각적 부담을 유발하여 주행성을 저하시킬 수 있어, 심리적 안정 도모를 위해 VES-LMC의 색상을 인접한 아스팔트 포장구간과 유사한 흑색으로 개발할 필요성이 대두 되었다. 따라서 본 연구에서는 흑색안료인 카본블랙을 시멘트량 대비 2% 첨가한 흑색 VES-LMC에 대한 현장 적용성 및 공용성을 평가하고자 하였다. 현장 적용결과 흑색 VES-LMC는 기존 VES-LMC와 비교하여 작업성, 슬럼프, 공기량 등에는 변화가 없었으며 양생 4시간에서는 20MPa 이상을 발현하였다. 공용성 평가결과 흑색 VES-LMC는 일반콘크리트와 아스팔트포장 구간에 비하여 온도응력발생량이 가장 적은 것으로 평가되었으며, 이것은 콘크리트의 안정성을 의미한다. 특히 결빙시 영하권에서도 상온을 유지하여 도로결빙을 예방하고 융빙을 촉진할 수 있을 것으로 기대된다.

초고강도 강섬유 보강 시멘트 복합체의 자기수축 모델식에 관한 연구 (Drying Shrinkage of Ultra High Strength Steel-Fiber Reinforced Cementitious Composites)

  • 강수태;박종섭;조창빈;박정준;고경택;김병석
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.725-728
    • /
    • 2008
  • UHSFRC의 수축은 대부분 자기수축에 의해 발생한다. UHSFRC는 물결합재비가 0.2정도로 매우 작고, 단위 결합재량이 상당히 많고 초기 수화진행 속도가 매우 빨리 진행되어 자기수축(autogenous shrinkage)이 매우 크게 발생한다. 초기재령에 자기수축이 크게 발생할 경우, 구조물의 변형 또는 균열이 발생하여 본래의 성능을 발휘하지 못할 수도 있다. 따라서 자기수축을 고려한 설계가 이루어져야하며 따라서 자기수축에 대한 정확한 예측이 매우 중요하다. 본 논문에서는 UHSFRC의 자기수축에 대한 연구를 수행하고 JSCE 설계 시공지침(안)에서 제시하고 있는 UHSFRC의 연구결과와 비교 분석하였으며, 그 결과 JSCE의 UHSFRC에 비해 상대적으로 큰 자기수축을 보임을 알 수 있었다. 그리고 기존의 자기수축 모델을 이용하여 UHSFRC에 대한 적합성 여부를 분석하였으며, 그 결과 Miyazawa의 모델식이 가장 잘 재령에 따른 자기수축을 잘 예측하는 것으로 나타났다.

  • PDF

광물질혼화재 종류별 고강도콘크리트의 압축강도 및 촉진 염소이온침투 특성 (Compressive Strength and Chloride Permeability of High Strength Concrete according to the Variety of Mineral Admixtures)

  • 문한영;김병권
    • 콘크리트학회논문집
    • /
    • 제16권3호
    • /
    • pp.407-414
    • /
    • 2004
  • 최근 우리나라 건설업체들의 해외, 특히 동남아지역의 빈번한 진출에 따른 고속도로, 항만 및 해양콘크리트구조물 등의 건설수주물량이 크게 증가하고 있는 추세이다. 이와 같은 요구에 부응하기 위하여 4종류의 산업부산물을 콘크리트용 혼화재로 활용한 고강도콘크리트에 착안하게 되었다. 본 연구에서는 광물질혼화재 4종류를 각각 조합한 고강도콘크리트 현장의 기후조건을 고려하여 양생온도 2종류와 양생조건 3종류씩 각각 변화시킨 총 22종류의 배합에 대하여, 고강도 강도 콘크리트의 기초물성과 염소이온 침투 저항성을 평가하기 위하여 응결 및 슬럼프, 압축강도, 공극량 및 ASTM C 1202 시험을 실시하였다. 본 연구결과, 고로슬래그미분말 혼합 고강도콘크리트의 혼합률에 관계없이 압축강도는 거의 비슷하였으나, 염소이온 총 통과전하량은 혼합률 40%에서 가장 작은 값을 나타내었다. 한편 G4FS 고강도콘크리트의 초기재령 압축강도는 가장 컸으나, G4F의 압축강도는 양생 온도 및 조건에 따라 상이하였으며, 재령 7일 이후 가장 크게 발현되었다. 한편, 고강도콘크리트의 총 통과전하량은 G4FS