• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.278-286
• /
• 2017

PURPOSE. The aim of this study was to determine the influence of long base lengths of a fixed partial denture (FPD) to rotational resistance with variation of vertical wall angulation. MATERIALS AND METHODS. Trigonometric calculations were done to determine the maximum wall angle needed to resist rotational displacement of an experimental-FPD model in 2-dimensional plane. The maximum wall angle calculation determines the greatest taper that resists rotation. Two different axes of rotation were used to test this model with five vertical abutment heights of 3-, 3.5-, 4-, 4.5-, and 5-mm. The two rotational axes were located on the mesial-side of the anterior abutment and the distal-side of the posterior abutment. Rotation of the FPD around the anterior axis was counter-clockwise, Posterior-Anterior (P-A) and clockwise, Anterior-Posterior (A-P) around the distal axis in the sagittal plane. RESULTS. Low levels of vertical wall taper, ${\leq}10-degrees$, were needed to resist rotational displacement in all wall height categories; 2-to-6-degrees is generally considered ideal, with 7-to-10-degrees as favorable to the long axis of the abutment. Rotation around both axes demonstrated that two axial walls of the FPD resisted rotational displacement in each direction. In addition, uneven abutment height combinations required the lowest wall angulations to achieve resistance in this study. CONCLUSION. The vertical height and angulation of FPD abutments, two rotational axes, and the long base lengths all play a role in FPD resistance form.

• 한국지반신소재학회논문집
• /
• 제15권3호
• /
• pp.67-76
• /
• 2016

교대는 토압을 받는 구조체로 뒤채움의 재질 및 부설방법, 다짐정도, 배수시설 등에 따라 교대에 미치는 영향이 민감한 구조물이다. 하지만 보통 실무에서는 경험치인 내부마찰값을 $30{\sim}35^{\circ}$를 적용하고 있는 실정으로 뒤채움재의 물성치값을 현실에 맞도록 합리적인 값의 설정이 필요하다고 할 수 있다. 본 논문에서는 교대높이 12m로 가정하고 직접기초의 교대를 최소안전율을 기반하여 절 성토 표준단면을 선정하여 내부마찰각의 변화에 따른 외적안정성분석와 부재력 검토하여 공사비를 비교하였다. 그 결과 내부마찰각에 따라 교대단면 축소 등으로 인한 공사비용 절감효과는 약 2.2%~8.4% 감소하였다.

• 한국수자원학회논문집
• /
• 제32권3호
• /
• pp.255-263
• /
• 1999

연직벽 교대에서의 국부세굴심을 측정한 실험실 자료들이다. 이들 자료들은 교대의 끝단형상, 정렬각도, 흐름수심, 흐름경사에 따라 국부 세굴심의 영향을 주는 자료들로 포함한다. 모형교대 끝단 형상이 직사각형, 타원형, 끝단을 깎아낸 직사각형, 예연형인 교대에서 국부세굴의 양상이 실험적 연구에 의하여 분석되었다. 실험들은 4개의 교대 형상에 대하여 흐름수심을 약 1cm씩 증가시켜서 이동상 세굴 조건하에 실험을 하였다. 수로의 하상경사는 0.01%, 0.03% 0.05% 0.1%, 0.2%로 정렬각도는 30 $^{\circ}$, 60 $^{\circ}$, 90 $^{\circ}$, 120 $^{\circ}$, 150 $^{\circ}$로 변화시켜 실험을 실시하였다. 최대 세굴심은 끝단 형상이 직사각형, 타원형, 끝단을 깎아낸 직사각형, 예연형의 순서로 분석되었다. 실험결과들은 세굴심이 교대의 형상뿐만 아니라 정렬각도, 흐름수심, 수로경사에 따라 다르게 나타나는 것을 보여주었다.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.43-61
• /
• 2017

The inverted T-type abutments are generally used in highway bridges constructed in Korea. This type of abutment is used because it has greater stability, with more pile foundations embedded in the bedrock, while simultaneously providing support for lateral earth pressure and vertical loads of superstructures. However, the cross section of inverted T-type abutments is large compared with the piers, which makes them more expensive. In addition, a differential settlement between the abutment and embankment, as well as the expansion joints, causes driving discomfort. This study evaluated the driving comfort of several types of abutments to improve driving comfort on the abutment. To achieve this objective, a traditional T-type abutment and three types of candidate abutments, namely, mechanically stabilized earth wall (MSEW) abutment supported by a shallow foundation (called "true MSEW abutment"), MSEW abutment supported by piles (called "mixed MSEW abutment"), and pile bent and integral abutment with MSEW (called "MIP abutment"), were selected to consider their design and economic feasibility. Finite element analysis was performed using the design section of the candidate abutments. Subsequently, the settlements of each candidate abutment, approach slabs, and paved surfaces of the bridges were reviewed. Finally, the driving comfort on each candidate abutment was evaluated using a vehicle dynamic simulation. The true MSEW abutment demonstrated the most excellent driving comfort. However, this abutment can cause problems with respect to serviceability and maintenance due to excessive settlements. After our overall review, we determined that the mixed MSEW and the MIP abutments are the most appropriate abutment types to improve driving comfort by taking the highway conditions in Korea into consideration.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• 구강회복응용과학지
• /
• 제36권4호
• /
• pp.211-221
• /
• 2020

원추형 내부연결 임플란트의 독특한 생역학적 현상이 수직침하와 전하중 상실이다. 원추형 내부연결 임플란트에서 수직적 정지점의 부재로 발생하는 수직침하에 의해 나사의 전하중이 상실되고 교합이 낮아지는 현상이 유발된다. 원추형 내부연결 임플란트에 발생하는 응력은 나사가 아니라 지대주가 접촉하는 계면에 집중되므로 식립할 때는 가급적 상부직경이 두꺼운 임플란트를 선택하는 것이 중요하다. 원추형 내부연결 임플란트는 치조정보다 하방에 식립해야 하며 수복 시에는 적절한 지대주 형태와 정확한 연결을 가지는지 주의해야 한다. 최상의 임상적 결과를 얻기 위해서는 상부 직경을 잘 선택하고 적절한 위치에 식립하여 수복하는 것이 필요하다.

• 구강회복응용과학지
• /
• 제29권3호
• /
• pp.259-271
• /
• 2013

임플란트 고정체-지대주 결합구조체의 형태에 따른 교합부하의 반응이 다양하여 본 연구에서는 하중위치 및 결합구조체 접촉 비율에 따라 3단 계단형 결합구조체와 경사형에서 어떠한 차이가 있는 지를 3차원 유한요소분석을 시행하였다. 2종의 임플란트-지대주 결합 구조체에 연결된 상부 치관을 제작하여 각 치관에 설정된 하중위치에 200 N의 하중을 부여하였다. 임플란트 중심 부위에서 하중조건이 멀어질수록 피질골정에 가해지는 응력이 증가되기에 하중조건은 응력발생에 영향을 미치는 주요 요소이며 다음으로 결합구조형태에도 영향을 받았다. 또한 수직 하중에 비해 빗금 경사 하중이 부여된 경우 계단형은 경사형에 비해 유리한 응력 분포를 보였다. 그리고 지대주 결합구조체가 고정체의 내벽에 대해 접촉이 많아 질수록 골질에 대한 응력분산이 유리한 것으로 나타났다. 결론적으로 고정체 폭경에서 벗어난 빗김 수직 및 경사 하중은 결합구조체의 종류와 관계없이 피질골정에 응력을 집중시키므로 저작기능시 교합접촉면을 고정체의 폭경 내에 위치하도록 하는 것이 생체역학적으로 바람직 할 것으로 사료되었다.