• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.33-41
• /
• 1994

단결정 성장과정에서 고액계면의 위치와 형상이 결정의 품질에 영향을 준다는 사실은 이미 잘 알려져 있다. 따라서 이를 결정해 주는 노내 온도분포의 파악은 매우 중요하다. 본 연구에서는 VGF 단결정법을 대사응로 발열체의 온도만을 이용하여 노내 온도분포를 구할 수 있는 프로그램을 개발하였으며,이를 사용하여 지지봉 및 도가니의 재질과 크기가 고액계면의 형상에 미치는 영향을 검토해 보았다. 지지봉의 반경이 클수록, 열전도도가 작을수록 평활한 고액계면이 나타나 . 열전도도가 등방성을 가진 도가니의 경우, 열확산계수의 증가에 따라 고액계면이 더 오목해지는 경향을 보였다. PBN과 석영 도가니의 계산 결과 비교를 통하여 도가니 열전도돋의 이방성이 고액계면에 미치는 영향을 고찰해 본 결과, 계면의 위치에 따라서 다른 양상을 보인다는 것을 알았다.것을 알았다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.17.2-17.2
• /
• 2011

Double-walled carbon nanotubes (DWCNTs) were grown with vertical alignment on a Si wafer by using catalytic thermal chemical vapor deposition. This study investigated the effect of pre-annealing time of catalyst on the types of CNTs grown on the substrate. The catalyst layer is usually evolved into discretely distributed nanoparticles during the annealing and initial growth of CNTs. The 0.5-nm-thick Fe served as a catalyst, underneath which Al was coated as a catalyst support as well as a diffusion barrier on the Si substrate. Both the catalyst and support layers were coated by using thermal evaporation. CNTs were synthesized for 10 min by flowing 60 sccm of Ar and 60 sccm of H2 as a carrier gas and 20 sccm of C2H2 as a feedstock at 95 torr and $750^{\circ}C$. In this study, the catalyst and support layers were subject to annealing for 0~420 sec. As-grown CNTs were characterized by using field emission scanning electron microscopy, high resolution transmission electron microscopy, Raman spectroscopy, and atomic force microscopy. The annealing for 90~300 sec caused the growth of DWCNTs as high as ~670 ${\mu}m$ for 10 min while below 90 sec and over 420 sec 300~830 ${\mu}m$-thick triple and multiwalled CNTs occurred, respectively. Several radial breathing mode (RBM) peaks in the Raman spectra were observed at the Raman shifts of 112~191 cm-1, implying the presence of DWCNTs, TWCNTs, MWCNTs with the tube diameters 3.4, 4.0, 6.5 nm, respectively. The maximum ratio of DWCNTs was observed to be ~85% at the annealing time of 180 sec. The Raman spectra of the as-grown DWCNTs showed low G/D peak intensity ratios, indicating their low defect concentrations. As increasing the annealing time, the catalyst layer seemed to be granulated, and then grown to particles with larger sizes but fewer numbers by Ostwald ripening.

• 한국의상디자인학회지
• /
• 제8권3호
• /
• pp.27-34
• /
• 2006

Flexibility, love of symbols, small size-these are all qualites that accompany the proclivity towards compactness in Japanese culture. They developed and have been refined to an unusual level in Japan partly out of the necessity to use limited space economically, but these qualities also characterize the aesthetic preferences of the people. Because space is so precious, it receives a great deal of attention in every aspect of life. Over the centuries Japanese have devised innumerable ways to use space that are ingenious in their successful combination of pragmatism, harmony, and beauty. Folding, stacking, rolling, nesting, carrying, consolidating, miniaturizing and transforming are some of the techniques for living that have created the compact culture. Folding allows a one-dimensional object to be placed in prescribed small space. Stacking objects of the same shape makes use of vertical space, saving valuable horizontal space. Rolling an object reduces it to a tidy cylinder without creasing it, creating yet another form of repose for functionally flat things. Nesting several identically shaped objects of graduated sizes is known as ireko. Carrying things by hand makes them available for any occasion, by plan or on impulse. Consolidating is to bring together the multifarious systems of living into an integrated whole. Miniaturizing things is a way to bring even the universe down to the scale of a human hand. Transforming the face of things is another notable propensity in the Japanese life style. Each one is put to use in countless ways, suggesting principles and conceptions that encapsulate the wisdom of tradition. In this study I wishes to investigate the principals of Japanese traditional design and the applied case in fashion goods.

• 대한산업공학회지
• /
• 제41권3호
• /
• pp.225-232
• /
• 2015

The smart watch is the most popular wearable computing device because it takes a form of wristwatch. Many smart watches have adopted the touch screen interface due to the limited size of display. This paper focuses on touch key size and spacing that affect the usability about the touch key of smart watch. The experiments were made for four touch key sizes (width${\times}$height; $5{\times}5$, $5{\times}7$, $7{\times}5$, $7{\times}7mm$) and nine touch key spacing (vertical${\times}$horizontal; $0{\times}0$, $0{\times}1$, $0{\times}3$, $1{\times}0$, $1{\times}1$, $1{\times}3$, $3{\times}0$, $3{\times}1$, $3{\times}3mm$). The completion time, error rate, control discomfort and identification discomfort were measured. The touch key size $7{\times}7$, $7{\times}5$ and the touch key spacing $3{\times}3$, $1{\times}3$ provided the best results in terms of the completion time and the control discomfort, while the square touch key ($7{\times}7$, $5{\times}5$) provided the best performance for the error rate measure. The result of this study can help ergonomically design the touch interface of the smart watch.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.334-408
• /
• 2006

In Hong Kong, large-diameter (${\ge}600mm$) bored piles and large-section excavated rectangular barrettes are commonly used to support tall buildings to resist both vertical and horizontal loads. These piles and barrettes penetrate through and may found in saprolitic soils and decomposed rocks. Generally, the design of these large bored piles and barrettes involves considerable amount of uncertainty and design parameters must usually be verified by field tests. In this paper, over 50 full-scale load tests on large-diameter bored piles and over 15 large-section of rectangular barrettes in Hong Kong are reviewed and interpreted critically, in particular the degree of mobilisation of side shear resistance using a mobilization rating (MR) factor and a displacement index (DI) for floating bored piles and barrettes and rock-socketed piles, respectively. The author was heavily involved with many of these load tests. The diameter of the bored piles tested ranges from 0.6m to 1.8m and the depth varies from 12m to 75m. Sizes of barrettes critically reviewed include $2.2m{\times}0.6m,\;2.2m{\times}0.8m,\;2.8m{\times}0.8m\;and\;2.8m{\times}1.0m$ (on plan) and the depth varies from 36m and 63m. Based on these field tests, a new failure load criterion for large-diameter bored piles and barrettes is developed and proposed. The side shear resistance of the bored piles and barrettes is quantitatively analyzed with respect to local displacements, standard penetration tests, unconfined compressive strength (UCS) for rock sockets and using the effective stress principle. In addition, the effects of construction including post-grouting, construction time, side scraping and excavation tools on side shear resistance are investigated and reported.

• 한국해양환경ㆍ에너지학회지
• /
• 제1권1호
• /
• pp.39-46
• /
• 1998

본 연구는 수중에서 PCB로 오염된 연안퇴적물 입자의 입자크기분포의 변화를 시뮬레이션 할 수 있는 수치모델을 제시한다. 이 모델은 입자의 침강과 연직확산과 함께 응집 현상을 포함하며 공간적으로는 연직방향으로 일차원 모델이다 연직방향 메커니즘에 대한 고려는 퇴적물 입자의 수중 체류시간을 계산하기 위함이다. 본 연구에서는 모델을 개발 제시함과 아울러 실제 미국의 한 사례지역에서의 PCB로 오염된 연안퇴적물의 입자크기분포를 사용하여 모델의 시뮬레이션 결과를 제시하였다. 이 결과 모의시간인 48 시간 내에 퇴적물 입자크기 변화가 상당히 진행되며 수중에서 입자크기별로 입자가 다르게 제거됨과 이 과정에서 응집이 중요한 요인이 될 수 있음을 보이고 있다. 본 연구에서 개발 제시된 모델은 준설 등 환경정화사업과 관련 불가피하게 수반될 수 있는 오염퇴적물의 재부유로 인한 오염확산범위를 평가하는데 유용하게 이용될 수 있다.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1664-1670
• /
• 2015

저널 베어링은 샤프트와 베어링이 윤활유를 사이에 두고 서로 미끄러지는 유체윤활 상태에서 운동하고 있으며, 넓은 마찰 면에 하중을 분산하여 받기 때문에 큰 힘을 받을 수 있다. 저널 베어링이 유체 윤활 상태에서 원활한 동작으로 운전되기 위해서는 저널 베어링의 표면에 오일 구멍이나 오일 홈을 더하여 베어링 틈새로 충분한 윤활유가 공급되어야 한다. 이러한 급유 홈의 형상이나 크기 및 급유 위치에 따라 베어링의 성능이 달라진다. 따라서 본 연구에서는 여러 급유 조건 중 저널 베어링의 오일 홈의 형상(삼각형, 사각형, 반원형)에 따른 유량을 측정하여, 어느 형상에서 가장 많은 유량을 토출하는지 알아봄으로써, 저널 베어링을 설계하는데 최적의 성능을 나타내는 홈의 형태를 파악하고자 하였다. 온도가 낮을수록 유량이 많으며, 회전수가 높아질수록 온도의 영향이 작아지고, 삼각형의 오일 홈일 때 유량이 가장 많은 것으로 나타났다.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.75-83
• /
• 2004

Ice rubble pieces broken by the bow impact load and side hull of an icebreaking vessel usually pass along the ship's bottom hull and may hit the propeller/rudder or other stern structures causing serious damage to ship's hull . Therefore it is important to estimate the size of broken ice pieces during the icebreaking process. The dynamic interaction process of icebreaker with infinite ice sheet is simplified as a wedge type beam of finite length supported by elastic foundation. The wedge type ice beam is leaded with vertical impact forces due to the inclined bow stem of icebreaking vessels. The numerical model provides locations of maximum dynamic bending moment where extreme tensile stress arises and also possible fracture occurs. The model can predict a failure length of broken ice sheet given design parameters. The results are compared to Nevel(1961)'s analytical solution for static load and observed pattern of ice sheet failure onboard an icebreaker. Also by comparing computed failure length with the characteristic length, the meaning of ice rubble sizes is discussed.

• 전산구조공학
• /
• 제8권4호
• /
• pp.149-158
• /
• 1995

열간압연된 형강은 수직재나 휨재 등으로 사용할 때 파이프나 덕트 등의 설비에 필요한 공간을 확보하기 위해 웨브에 개구부를 두기도 한다. 개구부를 갖는 형강의 웨브는 면내력을 받는 사각형 평판으로 고려하여 좌굴하중을 구하였다. 재하변은 단순지지로 하고 재하변은 직각인 변은 탄성지지단으로 보고 해석하였으며, 국부좌굴에 대한 보강을 위해 개구부 주위(하중 방향과 평행한 두변)에 보강재를 두어 단면 손실에 대한 좌굴하중의 감소를 보강하였다. 본 연구에서는 평판에 대한 고전적인 이론해와 유한요소에 의한 해석해를 비교하여, 해석에 대한 해의 정확성을 검증한 후 개구부의 크기, 보강재의 크기와 탄성지지단의 비틀림 상수의 변화에 대한 효과를 알아보았다. 그 결과 이론해와 해석해의 오차는 0.31%로 상당히 정밀한 해석해를 얻었으며, 비틀림 상수의 크기와 보강재의 크기에 따라 유공 보강판의 효과적인 개구부 크기를 결정하였다.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.133-140
• /
• 1979

The author compared patients showing two extremes of incisor vertical relationship to find out differences in craniofacial morphology which might influence face height and incisor overbite. The subjects consisted of 53 open-bite cases and the same number of deep-bite cases. The results were as follows: 1. On the average, the lower face height was significantly greater in open-bite cases than in deep-bite cases. 2. In open-bite cases, gonin-menton length was significantly greater than in deep-bite cases. In deep-bite cases, anterior cranial base length and posterior cranial base length were significantly greater in open-bite cases. 3. The jaw angle was significantly greater in open-bite cases. 4. The gonion-menton-nasion angle was significantly greater in deep-bite cases. 5. From geometric standpoint, the increase of jaw and joint angle would increase lower face height, but these two showed negative correlation. 6. The sizes of the jaw and joint angle might be factors of open-bite or deep-bite, but these were not the only variables that determined lower face height. 7. In open-bite cases, there was a closer correlationship between lower face height and the other linear measurments than in deep-bite cases. In deep-bite cases, there was a closer correlationship between lower face height and the other angular measurements than in open-bite cases. 8. Considering both linear and angular measurements of facial polygon, all contributed significantly to the lower face height. The nonsignificant variables were jaw and joint angle in open-bite cases, and anterior cranial base length, jaw angle, and joint angle in deep-bite cases.