• 제목/요약/키워드: vertical sizes

검색결과 186건 처리시간 0.027초

웨이퍼 표면상의 입자침착에 관한 수치 시뮬레이션 (Numerical Simulation of Particle Deposition on a Wafer Surface)

  • 명현국;박은성
    • 대한기계학회논문집
    • /
    • 제17권9호
    • /
    • pp.2315-2328
    • /
    • 1993
  • The turbulence effect of particle deposition on a horizontal free-standing wafer in a vertical flow has been studied numerically by using the low-Reynolds-number k-.epsilon. turbulence model. For both the upper and lower surfaces of the wafer, predictions are made of the averaged particle deposition velocity and its radial distribution. Thus, it is now possible to obtain local information about the particle deposition on a free-standing wafer. The present result indicates that the particle deposition velocity on the lower surface of wafer is comparable to that on the upper one in the diffusion controlled deposition region in which the particle sizes are smaller than $0.1{\mu}m$. And it is found in this region that, compared to the laminar flow case, the averaged deposition velocity under the turbulent flow is about two times higher, and also that the local deposition velocity at the center of wafer is high equivalent to that the wafer edge.

Detection of Fragment Length Polymorphism of the VNTR Loci D1S80 and D2S123 by PCR Amplification, PAGE and Silver Staining

  • Nam, Hyun-Suk;Kim, Eun-Hee;Yoon, Wan-Hee;Lee, Kong-Joo
    • BMB Reports
    • /
    • 제28권4호
    • /
    • pp.359-362
    • /
    • 1995
  • The highly polymorphic variable number of tandem repeat (VNTR) loci in the human genome are informative markers for the genetic characterization of individuals in the paternity test and forensic science as well as for the study of human disease. In this study, VNTR loci D1S80 and D2S123 have been amplified by PCR and the amplified length polymorphic alleles were detected with a discontinuous vertical PAGE system and silver staining. For explicit DNA typing, PCR optimization, in which amplification efficiencies are similar over a wide range of allele sizes, non-specific amplifications are minimal, and new longer alleles have high amplification efficiency, has been performed by changing the PCR reaction buffer composition and thermal cycling conditions. It turned out that adding an appropriate amount of Tween 20 and NP40 to the PCR reaction buffer and raising the annealing temperature to $68^{\circ}C$ in thermal cycling made it possible for optimal VNTR loci amplification. A modified PAGE system for VNTR separation was established. Under these conditions, new longer alleles in the 01580 locus were discovered and 025123 pattern changes in colorectal tumors were observed. These technical tips are valuable for detecting various amplified fragment length polymorphisms.

  • PDF

학령기 여아의 상반신 체형특성-체형구성인자를 중심으로- (Somatometric Characteristics on Upper Body of Elementary School Girls -Focusing somatometric factors-)

  • 장정아;배은아;권영숙
    • 한국의류학회지
    • /
    • 제24권6호
    • /
    • pp.850-860
    • /
    • 2000
  • The purposes of this study was to provide the fundamental data for children's wear standardizing sizes of ready-made clothes by analyzing the elementary school girls’somatotype. The subjects for anthropometic measurements were 434 elementary school girls’by age groups < ‘(1st age(1ㆍ2 grade)’,‘2nd age(3ㆍ4 grade)’, and 3rd(5ㆍ6 grade)’ > living in Pusan. According to the analysis of upper bodies by the age groups 1. According to the analysis to draw somatometric factors by the age groups, sevenㆍseven and six actors in 1st . End and 3rd age groups are obtained from measurements of upper body. 2. The 1st & 2nd age groups: As the result of factor analysis for the factor, the first and second factors which explain more than 70% of the whole variance represent“horizontal size”and“vertical size”, which characterize more aspects of the body shape of girls at elementary school ages. 3. The 3rd age groups: As the result of factor analysis for the factor, 6 factor which explain 74.39% of variance were extracted form anthropometic data. The first factor represented the items of circumference, breadth and depth related to“sectional size the front length of the upper body”, The second factor described the items of "heights & the back length of the upper body”.

  • PDF

기능적 Brassiere 개발에 관한 연구(II) - bust up 기능을 중심으로 - (Study on the Functional Brassiere Development)

  • 최혜선;강여선
    • 한국의류학회지
    • /
    • 제15권3호
    • /
    • pp.229-238
    • /
    • 1991
  • The object of this study is to develope an improved version of brassiere with better fit and improved performance by conducting a try-on test on 6 types of revised brassieres (constructed on above basis). The study procedures consisted of a try-on test of experimentally constructed brassieres and a sensory test on fit. The results of experimentally constructed brassiere trial are as follows. 1. The sizes showing performance effects due to different types of experimentally construct- ed brassieres were bust length, bust height, under bust curve length, vertical and horizontal bust diamenter, upper-lower bust slope angle (direct measurement, parallel standard, upper torso tilt rate), side bust slope angle and top bust slope angle. 2. Concerning the changes in lower cup interior, elastic materials and wider portions perfor-med better in bust up effect. 3. No effects due to different shoulder strap positions were observed, but combined with lower cup interior changes the side types proved more effective than the standard types.

  • PDF

수치모델을 이용한 홀로세 중기의 아시아 몬순순환 변화 연구 (Numerical Simulation of the Asian Monsoon for the Mid-Holocene Using a Numerical Model)

  • 김성중;이방용;박유민;석봉출
    • Ocean and Polar Research
    • /
    • 제27권3호
    • /
    • pp.289-297
    • /
    • 2005
  • The change in global climate and Asian monsoon patterns during the mid-Holocene, 6000 years before present (6 ka), is simulated by a climate model at spectral truncations of T170 with 18 vertical layers, corresponding to grid-cell sizes of roughly 75km. The present simulation is forced with the observed monthly data of sea surface temperatures, and the specified concentration of atmospheric carbon dioxide, while in the mid-Holocene experiment, orbital parameters such as obliquity, precession, and eccentricity are changed to the 6ka conditions. Under such conditions, the precipitation associated with the summer monsoon is enhanced over a wider zonal band from the Middle East to Southeast Asia, while no significant alteration takes Place in winter. The monsoonal wind also increases over the Arabian Sea, showing the enhanced southwesterly wind during summer and northeasterly wind during winter. Overall, the showing of the Asian monsoon is enhanced during the mid-Holocene, especially in summer, which is consistent with the proxy estimates and other previous model simulations.

남서태평양 리코후 드리프트 퇴적층의 쇄설성 실트입자 크기의 수직적 변화를 이용한 플라이스토세 후기 심해서안경계해류의 세기 변화 (Late Pleistocene Variation in Intensity of Deep Western Boundary Current from Vertical Change in Size of Terrigenous Silt in the Rekohu Sediment Drift, SW Pacific)

  • 김부근;이영주;박유현;박장준
    • Ocean and Polar Research
    • /
    • 제28권4호
    • /
    • pp.451-457
    • /
    • 2006
  • Hole 1124 of ODP Leg 181 was located in the Rekohu sediment drift off eastern New Zealand in the southwest Pacific Ocean. Mean gain sizes of sortable silt were measured in two drilled cores (1124A and l124B). Chronostratigraphy of core 1124 was correlated with the well-dated nearby core S931, resulting that the age of core 1124 covers the late Pleistocene spanning about MIS (Marine Isotope Stage) 5. Mean grain size of sortable silt seemed to be relatively large during the glacial period, whereas that of the interglacial period was smaller, although several tephra layers contain some coarse-grained pyroclatic particles. The variation in mean grain size of sortable silt in Rekohu sediment drift during the late Pleistocene indicates that the intensity of Deep Western Boundary Current (DWBC) might have been enhanced during the glacial period as a result of increased production of Antarctic Bottom Water (AABW).

Multi-Point 2-D FFT를 이용한 TFT-LCD Mura 검출 알고리즘 (TFT-LCD Mura Detection Algorithm Using Multi-point 2-D FFT)

  • 장영범;김한진
    • 한국산학기술학회논문지
    • /
    • 제11권4호
    • /
    • pp.1278-1284
    • /
    • 2010
  • 이 논문에서는 TFT-LCD의 제조공정에서 발생하는 mura를 효율적으로 검출하는 multi-point FFT를 기반으로 한, 2차원 FFT를 이용하는 새로운 전기적인 검출 방식을 제안한다. TFT-LCD의 mura 패턴은 어느 일정한 영역을 갖고 있으므로 어느 한 라인에서 관찰하면 sin 파의 모양으로 관찰된다. Mura의 모양은 원, 가로 타원, 세로 타원으로 분류할 수 있으며 2-D FFT 변환을 통하여 일정한 문턱치와 비교하면 mura를 쉽게 검출할 수 있음을 보인다. 실험영상의 simulation을 통하여 제안 알고리즘이 다양한 크기의 mura 패턴을 효과적으로 검출할 수 있음을 보였다. 따라서 제안된 알고리즘은 TFT-LCD mura의 자동 검사 시스템에 이용될 수 있을 것이다.

Wafer Surface Scanner를 이용한 반도체 웨이퍼상의 입자 침착속도의 측정 (Measurement of Particle Deposition Velocity toward a Horizontal Semiconductor Wafer Using a Wafer Surface Scanner)

  • 배귀남;박승오;이춘식;명현국;신흥태
    • 설비공학논문집
    • /
    • 제5권2호
    • /
    • pp.130-140
    • /
    • 1993
  • Average particle deposition velocity toward a horizontal semiconductor wafer in vertical airflow is measured by a wafer surface scanner(PMS SAS-3600). Use of wafer surface scanner requires very short exposure time normally ranging from 10 to 30 minutes, and hence makes repetition of experiment much easier. Polystyrene latex (PSL) spheres of diameter between 0.2 and $1.0{\mu}m$ are used. The present range of particle sizes is very important in controlling particle deposition on a wafer surface in industrial applications. For the present experiment, convection, diffusion, and sedimentation comprise important agents for deposition mechanisms. To investigate confidence interval of experimental data, mean and standard deviation of average deposition velocities are obtained from more than ten data set for each PSL sphere size. It is found that the distribution of mean of average deposition velocities from the measurement agrees well with the predictions of Liu and Ahn(1987) and Emi et al.(1989).

  • PDF

STUDY OF THE MARINE CLOUD STRUCTURE WITH AQUA AMSR-E

  • Shoom, Mariya Yu.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.1007-1010
    • /
    • 2006
  • This study investigates the spatial structure of the total cloud liquid water content Q fields over the Northwest Pacific Ocean during winter monsoon. The distributions of Q have been estimated from the brightness temperatures of the ocean - atmosphere system $T_B(f)$, where f is frequency, measured by AQUA AMSR-E in January -March 2003. Marine strati (St) and stratocumuli (Sc) are typical for winter monsoon season. They were analysed using mainly high-frequency channel at f = 36.5 GHz, vertical polarisation. $T_B$ data were accompanied by the data on near surface wind speed, air temperature and humidity from the nearest meteorological stations. Tow one-dimensional spectra were computed for downwind and crosswind sections of Q fields. The AMSR-E antenna field of view (14-8 km) and the cloud field sizes (100-1000 km) restricted the spatial scales. The results of case study Jan 31 2003 are presented. Scale-invariant spectrum is typical. In the cases of extended St levels a spectral slope equals about -1.7, conforming to classical -5/3 of turbulence theory. For Sc cases the absolute magnitude of spectral slope is rather higher, as a rule. The value is about -2. In the case when cloud streets are presented, a strait line form of spectrum is less reliable with a slope being rather lower (about -1.4).

  • PDF

강접골조의 수직 및 수평하중에 대한 근사해석 (Appoximate Analysis of Rigid Frames under Vertical and Lateral Loads)

  • 최철웅;김영찬;강경수
    • 한국강구조학회 논문집
    • /
    • 제13권2호
    • /
    • pp.115-122
    • /
    • 2001
  • 오늘날 컴퓨터가 복잡한 해석을 수행하는 도구로 이용되더라도 해석의 결과값에 대한 적합성을 평가하기 위해서는 공학적 판단이 필요하다. 근사해석법은 이러한 결과값을 검토하기 위한 편리한 도구가 될 수 있으며 골조의 응력분포 그리고 부재 사이즈의 직하중 및 수평하중을 받는 강접골조를 근사해석하기 위한 방법을 제시하는 것이며 본 연구에서 제안한 방법의 유효성을 검증하기 위해서 기존의 방법과 비교하였고 구조물 거동의 예측에 있어서 향상된 결과를 보여주었다.

  • PDF