• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.1-10
• /
• 2008

In this study, the effects of vent location, outside temperature, wind velocity and fire size on the performance of natural venting of the vertical vent designed according to NFPA 204 standard and fire characteristics were numerically investigated using CFAST. In cases of the Vent located on most upper wall, lower outside temperature and lower wind velocity, vents met the performance criteria of venting. The larger fire size becomes, the more mass flow rate through a vent becomes, but the lower interface height of smoke layer becomes, so that vent didn't meet the performance criteria of venting. It should be noted that a natural vertical vent be designed considering maximum outside temperature and maximum wind velocity and developing a design fire accurately in order to meet the performance criteria of venting.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.8
• /
• pp.3-11
• /
• 2018

This study suggested practical considerations in case of planning Small-Sized Household Units of the Vertical Extension of Aged Apartment along with selecting particular Age-Apartment Complex to plan Small-Sized Household Units. Four parts of consideration; (1) Architectural planning aspects, (2) Resident aspects, (3) Structural aspects, and (4) Facility aspects were thoroughly examined to apply in the remodeling construction period. Proposals for Small-Sized Household Units, in this study, covered two different combinations. One was the combination of six equal units, the other was the combination of eleven different types of household units which reflected resident aspects in plan organizations. Plan organization proposal could be chosen and applied to Vertical Extended units by Local Government, Remodeling Association, or Constructor based on their potential residents' aspect, such as family size, life style, age, amount to income and etc. to fulfill their satisfaction. Furthermore, this study had great significance of the adequately reflecting demand on Small-Sized Household Units in Vertical Extension of Aged Apartment.

• Journal of Korean Academy of Nursing Administration
• /
• v.13 no.1
• /
• pp.65-73
• /
• 2007

Purpose: This study was carried out to find out the factors affecting on organizational commitment of hospital nurses. Method: The questionnaire-based research was done with 989 hospital nurses between January and March, 2004. Results: Variables such as job satisfaction, met expectations, compensation and welfare status of hospital, work involvement, positive affectivity had significant positive direct effect on organizational commitment in order of size, however, vertical conflict and job opportunity had negative direct effect in order of size. It was found that the following variables, listed in order of size, had significant total effects on organizational commitment: job satisfaction, met expectations, vertical conflict, compensation and welfare status of hospital, positive affectivity, work involvement, job opportunity, job autonomy, work definiteness, division justice, stability of employment, expectations before entering a hospital. Conclusion: It is recommended that programs for job satisfaction promotion, met expectations promotion, adequate compensation and welfare of hospital, work definiteness and work autonomy, solving conflict, positive affectivity promotion should be implemented to increase organizational commitment of hospital nurses.

• The Research Journal of the Costume Culture
• /
• v.6 no.2
• /
• pp.141-152
• /
• 1998

In the result of classification body types for 100 adult women by direct measurements and antropometric measurements, the mean of weight is bigger than he mean of weight of 97'. So modern 20's women is more than than 94'. In the result of factor analysis, 5 factors were extracted (horizontal sizes, vertical sizes, and degree of shoulder) from exponent sizes of the antropometric measurements item, and another 5 factors were extracted (thick of body, horizontal form of the torso, silhouette of the torso, and size of abdomen) from direct measurements item. The body types are classified into 4 types by cluster analysis in the result of direct measurement item, and another body types are classified into 5 types by antropometric measurement item, it was classified into the horizontal size and the shape and silhouette of torso, and by direct measurement item, it was only classified into the vertical and horizontal size. So for the patternmaking of clothing, it is more adoptable the classification of body by antropometric measurement item than direct measurement item.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.85-89
• /
• 2007

This paper presents the method to provide a fast service for user in image manipulation such as zooming and panning of huge size high resolution satellite image (e.g. Giga bytes per scene). The proposed technique is based on the hierarchical structure that has 3D-Tiling in horizontal and vertical direction to provide the image service more effectively than 2D-Tiling technique in the past does. The essence of the proposed technique is to create tiles that have optimum level of horizontal as well as vertical direction on the basis of current displaying area which changes as user manipulates huge image. So this technique provides seamless service, and will be very powerful and useful for manipulation of images of huge size without data conversion.

• Geomechanics and Engineering
• /
• v.1 no.1
• /
• pp.97-112
• /
• 2009

The interactions between a granular pile and raft placed on top are investigated using the continuum approach. The compatibility of vertical and radial displacements along the pile - soil interface and of the vertical displacements along the raft - top of ground interfaces are satisfied. Results show that consideration of radial displacement compatibility does not influence the settlement response of or sharing of the applied load between the granular pile and the raft. The percentage load carried by the granular pile (GP) increases with the increase of its stiffness and decreases with the increase of the relative size of raft. The normal stresses at the raft - soil interface decrease with the increase of stiffness of GP and/or relative length of GP. The influences of GP stiffness and relative length of GP are found to be more for relatively large size of raft. The percentage of load transferred to the base of GP increases with the increase of relative size of raft.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1346-1350
• /
• 2018

An electrode-evaporation technology on both the top and bottom sides of the bare vertical-type single chip separated from the traditional substrate by cooling, was developed for III-nitride vertical-type single chip LEDs with thick GaN epilayer. The post-process of the cooling step was followed by sorting the bare vertical-type single chip LEDs into the holes in a pocket-type shadow mask for deposition of the electrodes at the top and bottom sides of bare vertical-type single chip LEDs without the traditional substrate for electrode evaporation technology for vertical-type single chip LEDs. The variation in size of the hole between the designed shadow mask and the deposited electrodes owing to the use of the designed pocket-type shadow mask is investigated. Furthermore, the electrical and the optical properties of bare vertical-type single chip LEDs deposited with two different shapes of n-type electrodes using the pocket-type shadow mask are investigated to explore the possibility of the e-beam evaporation method.

• The korean journal of orthodontics
• /
• v.51 no.2
• /
• pp.126-134
• /
• 2021

Objective: This study aimed to evaluate the following null hypothesis: there are no differences in the morphology of the temporomandibular joint (TMJ) structures in relation to vertical and sagittal cephalometric patterns. Methods: This retrospective study was performed with 131 participants showing no TMJ symptoms. The participants were divided into Class I, II, and III groups on the basis of their sagittal cephalometric relationships and into hyperdivergent, normodivergent, and hypodivergent groups on the basis of their vertical cephalometric relationships. The following measurements were performed using cone-beam computed tomography images and compared among the groups: condylar volume, condylar size (width, length, and height), fossa size (length and height), and condyle-to-fossa joint spaces at the anterior, superior, and posterior condylar poles. Results: The null hypothesis was rejected. The Class III group showed larger values for condylar width, condylar height, and fossa height than the Class II group (p < 0.05). Condylar volume and superior joint space in the hyperdivergent group were significantly smaller than those in the other two vertical groups (p < 0.001), whereas fossa length and height were significantly larger in the hyperdivergent group than in the other groups (p < 0.01). The hypodivergent group showed a greater condylar width than the hyperdivergent group (p < 0.01). The sagittal and vertical cephalometric patterns showed statistically significant interactions for fossa length and height. Conclusions: TMJ morphology differed across diverse skeletal cephalometric patterns. The fossa length and height were affected by the interactions of the vertical and sagittal skeletal patterns.

• Journal of the Korean Society of Visualization
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2010

An experimental investigation of the flow around a vertical fence was carried out using a PIV velocity field measurement technique. The vertical fence was embedded in a turbulent boundary layer. The instantaneous velocity fields measured at cross-sectional planes reveal complex longitudinal vortices that vary in size and strength, developing from the upstream location. In the instantaneous vorticity and velocity field data, the shear flow separated from the fence top is highly turbulent and shows unsteady flow characteristics. The topography of the ensemble averaged velocity fields, especially the separation bubble formed behind the fence, shows that the spatial distributions of streamwise velocity (U) and vertical (V) are symmetric, the spanwise velocity (W) is skew-symmetric with respect to the central xy-plane(z=0).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.135-141
• /
• 2004

The present paper concerns a smoke movement in a tunnel fire with a vertical shaft. The model tunnel measured 13.4m long, 0.4m wide and 0.4m high. The cross section is 1： 20 of a full scale tunnel. Ethanol was used as a fuel. The fire size in model tests varied from 1.35 kW to 13.37 kW, which corresponds to full scale fires of 2.41 to 23.91 MW. Smoke front velocity and temperatrue were decreased due to the vertical shaft install. Temperature was reduced maximum about 2$0^{\circ}C$ at ceiling and about 23$^{\circ}C$ at vertical position. CO concentration was reduced as the vent width widened. When vent width was more than 15 cm, CO concentration was not reached 100 ppm. Descent degree of the smoke layer was confirmed through the visualization.