• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.21-32
• /
• 2004

본 연구에서는 다제약 설계변수를 갖는 비선형 문제를 무제약 최소화 문제로 전환하는 축차무제약 최소화기법(SUMT)과 효과적인 강골조의 2차비탄성해석 방법 중의 하나인 개선소성힌지해석 방법을 접목시킨 평면 강골조의 연속최적설계 모델 및 프로그램을 개발하였다. 최적설계를 위한 목적함수로는 강골조물을 구성하는 모든 부재의 중량 합을, 제약조건으로는 AISC-LRFD의 휨강도, 전단강도, 압축 및 인장강도, 국부좌굴 및 부재좌굴, 그리고 단면형상 등에 관한 설계기준을 사용하였다. 본 연구에서 개발한 연속최적설계 모델을 이용하여 여러 평면 강골조의 최적설계를 수행하였으며, 최적설계 견과로부터 개발한 연속최적설계 모델의 사용성, 타당성, 효율성 및 경제성 등을 검토하였다.

• Steel and Composite Structures
• /
• 제29권1호
• /
• pp.1-22
• /
• 2018

Multi-storey precast concrete skeletal structures are assembled from individual prefabricated components which are erected on-site using various types of connections. In the current design of these structures, beam-to-column connections are assumed to be pin jointed. Welded plate beam to-column connections have been used in the precast concrete industry for many years. They have many advantages over other jointing methods in component production, quality control, transportation and assembly. However, there is at present limited information concerning their detailed structural behaviour under bending and shear loadings. The experimental work has involved the determination of moment-rotation relationships for semi-rigid precast concrete connections in full scale connection tests. The study reported in this paper was undertaken to clarify the behaviour of such connections under symmetrical vertical loadings. A series of full-scale tests was performed on sample column for which the column geometry and weld arrangements conformed with successful commercial practice. Proprietary hollow core slabs were tied to the beams by tensile reinforcing bars, which also provide the in-plane continuity across the connections. The strength of the connections in the double sided tests was at least 0.84 times the predicted moment of resistance of the composite beam and slab. The secant stiffness of the connections ranged from 0.7 to 3.9 times the flexural stiffness of the attached beam. When the connections were tested without the floor slabs and tie steel, the reduced strength and stiffness were approximately a third and half respectively. This remarkable contribution of the floor strength and stiffness to the flexural capacity of the joint is currently neglected in the design process for precast concrete frames. In general, the double sided connections were found to be more suited to a semi-rigid design approach than the single sided ones. The behaviour of double sided welded plate connection test results are presented in this paper. The behaviour of single sided welded plate connection test results is the subject of another paper.

• 한국항공우주학회지
• /
• 제32권6호
• /
• pp.16-22
• /
• 2004

지면엔 근접한 사각주 후면에서 발생하는 비정상 와류 배출은 지상 운송체, 교량, 건물 등의 항력 증가뿐 아니라, 동안정성에도 큰 영향을 미친다. 비압축성 평균 Navier-Stokes 방정식에 수정된 ${\varepsilon}-SST$ 난류 모델을 적용하여 사각주 하부와 지면과의 간극 유동을 해석하였다. 사각주 후류에서 와류가 발생하는 경우에는 간극에서의 평균 최대 속도가 억제된 경우에 비하여 높으며, 또한 최대 속도의 위치 또한 사각주 하부에 근접한 것을 확인하였다. 본 연구에서는 사각주 하부에 수평, 수직의 펜스를 설치하는 수동 제어기법을 적용하여 사각 주 후류의 와류 배출용 억제할 수 있다.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.311-321
• /
• 2004

Relationships between sedimentary environments and abundance of benthic animals were examined on the deep-sea floor, the Clarion-Clipperton Fracture Zone, in the northeast equatorial Pacific Ocean. Specimens were collected using a box corer at 8 stations by sieving through 0.3 mm mesh screen. Sediments showed finer grain size ranged from 5.63 to $7.97{\varphi}$, 83.1% of mean porosity, 1.81 kPa of mean shear strength and organic carbon content in sediment ranged from 0.97 to $1.87\;mg/cm^3$. Manganese nodules covered on the bottom layer from 4 to 57% of coverages. A total of 26 faunal groups in 6 phyla was sampled and comprised 1,467 individuals. Mean biomass were calibrated to 0.5 gWWt/$0.06\;m^2$. Small-sized animals including foraminiferans and nematods were dominated among the faunal group which comprised 49.1% (892 ind.) and 11.5% (320 ind.), respectively. In SPI-analysis, vertical bio-disturbance marks were not observed except to Beggiatoa-type bacterial mats. As the results of relationship between environments and benthos, abundance of benthic animals, especially nematode, showed only a negative correlation to the coverage of nodules, and any other sedimentary factors analyzed in this study were rarely affected to the spatial distribution of benthic animals.

• 한국강구조학회 논문집
• /
• 제12권1호통권44호
• /
• pp.1-8
• /
• 2000

본 연구에서는 보-기둥 접합부 비선형 거동과 부재 기하비선형을 고려할 수 있는 2차 탄성해석 프로그램을 이용하여 20층 가새 철골구조물에서 반강접 접합부가 구조물의 거동에 미치는 영향을 파악하였다. 구조물 전체에 미치는 영향으로 P-delta 효과와 최상층 수평변위를 확인하였고 국부적인 영향으로 부재력 분배 및 부재에 발생하는 조합응력을 조사하였다. 수평하중과 수직하중을 받는 구조물에 가새와 같이 횡력에 저항하는 구조시스템이 있는 경우 전단접합부를 반강접 접합부로 대체하여도 P-delta 효과 및 최상층 수평변위에 문제가 없었으며 부재력 분배에 의하여 펄 부재치수를 줄일 수 있어 경제적인 구조설계가 가능하였다.

• 한국태양에너지학회 논문집
• /
• 제30권4호
• /
• pp.9-14
• /
• 2010

The main cause of global warming is carbon dioxide generated from the use of fossil fuels, and active research on the reduction of carbon is in progress to slow down the increasing global warming. Wind turbines generate electricity from kinetic energy of wind and are considered as representative for an energy source that helps to reduce carbon emission. Since the kinetic energy of wind is proportional to the cube of the wind speed, the intensity of wind affects wind farm construction validity the most. Therefore, to organize a wind farm, validity analysis should be conducted first through measurement of the wind resources. To facilitate the approval and permission and reduce installation cost, measuring sensors should be installed at locations below the actual wind turbine hub. Wind conditions change in shape with air density, and air density is most affected by the variable sterrain and surface type. So the magnitude of wind speed depends on the ground altitude. If wind conditions are measured at a location below the wind turbine hub, the wind speed has to be extrapolated to the hub height. This correction of wind speed according to height is done with the Deacon equation used in the statistical analysis of previously observed data. In this study, the optimal Deacon equation parameter was obtained through the analysis of the correction of the wind speed error with the Deacon equation based on the characteristics of terrain.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.728-736
• /
• 2017

In this study, the bending behavior of cross-laminated timber (CLT) connected by nails were investigated. Especially, the load-carrying capacity of the nail-jointed CLT under out-of-plane bending was predicted by the lateral resistance of the used nails. Three-layer nail-jointed CLT specimens and a nail connection were manufactured by 30 mm (thickness) ${\times}$ 100 mm (width) domestic species (Pinus koraiensis) laminas and Ø$3.15{\times}82mm$ nails using a nail-gun. Shear test for evaluating the nail lateral resistance and bending test for evaluating the load-carrying capacity of the nail-jointed CLT under out-of-plane bending were carried out. As a result, two lateral resistance of the used nail, the 5% fastener offset value and the maximum value, were 913 N and 1,534 N, respectively. The predicted load-carrying capacity of the nail-jointed CLT by the 5% offset nail lateral resistance was similar to the yield points on the actual load-displacement curve of the nail-jointed CLT specimens. Meanwhile, the nail-jointed CLT specimens were not failed until the tension failure of the bottom laminas occurred beyond the maximum lateral resistance of the nails. Thus, the measured maximum load carrying capacities of the nail-jointed CLT specimens, approximately 12,865 N, were higher than the predicted values, 7,986 N, by the maximum nail lateral resistance. This indicates that the predicted load-carrying capacity can be used for designing a structural unit such as floor, wall and roof able to support vertical loads in a viewpoint of predicting the actual capacities more safely.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.399-414
• /
• 1997

This paper presents an investigation into the seismic response characteristics of a proposed ligh-weight pedestrian cable-stayed bridge made entirely from Glass Fiber Reinforced Plastics(GFRP). The study employs three dimensional finite element models to study and compare the dynamic characteristics and the seismic response of the GFRP bridge to a conventional Steel-Concrete (SC) cable-stayed bridge alternative. The two bridges were subjected to three synthetic earthquakes that differ in the frequency content characteristics. The performance of the GFRP bridge was compared to that of the SC bridge by normalizing the live load and the seismic internal forces with respect to the dead load internal forces. The normalized seismically induced internal forces were compared to the normalized live load internal forces for each design alternative. The study shows that the design alternatives have different dynamic characteristics. The light GFRP alternative has more flexible deck motion in the lateral direction than the heavier SC alternative. While the SC alternative has more vertical deck modes than the GFRP alternative, it has less lateral deck modes than the GFRP alternative in the studied frequency range. The GFRP towers are more flexible in the lateral direction than the SC towers. The GFRP bridge tower attracted less normalized base shear force than the SC bridge towers. However, earthquakes, with peak acceleration of only 0.1 g, and with a variety of frequency content could induce high enough seismic internal forces at the tower bases of the GFRP cable-stayed bridge to govern the structural design of such bridge. Careful seismic analysis, design, and detailing of the tower connections are required to achieve satisfactory seismic performance of GFRP long span bridges.

• 한국지반공학회지:지반
• /
• 제3권1호
• /
• pp.7-24
• /
• 1987

울산만 북서측 임해지역체 발달된 연약해성점토를 개양하기 위하려 선행대중과 Wick Drain공법의 병용공법이 적용되었다. 상기 공법의 적용에 따른 연약해성점토의 거동 및 강침특성을 요명하여, 안전하고 신속하게 시공을 실시하기 위하여 현장계측에 의한 공학적인 시공관리를 실시하였다. 본 고는 연약해성점토를 개량하기 위하여 적용한 선행하중과 Wick Drain공법의 설계, 시공 및 안전관리방법을 수록하고 있다.

• 한국지반공학회지:지반
• /
• 제3권2호
• /
• pp.55-70
• /
• 1987

본 연구에서는 정지토탄상태에서 수동토추상태 까지의 토압의 변화를 옹벽의 변위량에 따라 나타 내는 새로운 이론이 제시되었다. 제시된 이론은 2차원평형조건식과 Mohr-Coulomb의 파괴규준을 변 궐한 최대주응력과 최소주응력의 관계식을 바탕으로 이루어졌으며, 또한 옹벽의 변위량에 따른 흙의 내부마찰자(f)과 벽마찰각(5)의 변화를 옹벽상단에서 부터의 깊이의 함수로 나타내는 수학적 model이 개발되었다. 결과치를 수치해석적으로 구하기 위해 유한차분법이 이용되었고 또하 얻어 진 결과치를 실험치와 비교함으로써 본 연구에서 제시된 이론의 적합성이 확인되었다. 옹벽 설계와 관련된 벽마찰카의 변화가 토압에서 미치는 영향에 대해서도 아울러 고찰되었다.