• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.308-316
• /
• 1986

Vertical distribution of heterotrophic bacteria and physico-chemical characteristics were measuted in Kum River estuarine sediments. And interrelationship between heterotrophic bacterka and environmental factors was also studied. The type of sediment of Site 1 was silty clay, and sand at Site 2. Annual pH ranges were between 7.1 and 7.7 in the clay type sediment (Site 1) and 6.9-7.2 in the sand type sediment (Site 2). It was shown that organic matter contents were higher in the clay type sediment than those of sand type sediment. Redox potential values of sediments were decreased rapidly with depth at Site 1, but those of Sete 2 showed vertical fluctuation. Nitrogens(ammonia+amino acid-N, nitrate-N, nitrite-N) and phosphate in the clay type sediment showed higher values than those of sand type sediment. Annual distribution of heterotrophic bacteria were ranged $6.71{\times}10^4$ cells/g dry wt. $-2.50{\times}10^6$ cells/g dry wt. In the clay type sediment and $2.67{\times}10^3$ cells/g dry wt. $-1.94{\times}10^6$ cells/g dry wt. in the sand type sediment. Distribution of proteolytic, lipolytic, and amylolytic bacteria were decreased with the depth and the highest density was found in April and the lowest in January. Bacterial populations in sediments were closely correlated with such environmental factors as pH, redox potential, moisture content, organic matter contents, and inorganic nutrients such as nitrite-N and phosphate-P.

• ALGAE
• /
• v.21 no.1
• /
• pp.75-82
• /
• 2006

Cyanobacteria regulate their buoyancy in response to changing environmental conditions. This process is essential for cyanobacterial development and can account for their dominance in eutrophic waters in summer. The present investigation was conducted to understand the 24-hour vertical distribution of cyanobacteria and water quality characteristics in Lake Daecheong. Water samples were collected and analyzed at depth intervals of 2 or 3 m and at an interval of three hours for a day on August 28, 2001 and September 24, 2002. In 2001 the accumulated standing crop of Microcystis spp. from surface to a depth of 6 m was 94.9%. Microcystis spp. showed no vertical migration below the thermocline. Microcystis spp. had maximum density near the surface, but shifted to 2 m depth at 2 p.m. A dense population of Anabaena spp. accumulated near the surface from 2 to 5 p.m. in 2002.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.235-236
• /
• 2022

In the present study, the effect of horizontal vent position on fire phenomena in the enclosure with vertical and horizontal vents was examined using numerical simulation. Case 1 indicates the condition that the horizontal vent is in the center of the ceiling. Case 3 indicates the condition that the horizontal vent is far away from the vertical vent. Case 2 indicates the condition that the horizontal vent is installed between Case 1 and Case 3. The temperature distribution, smoke layer temperature, velocity distribution, and mass flow rate of horizontal vent flow were analyzed. In Case 2, the temperatures were lowest and the mass flow rate through the horizontal vent was largest. This is because the flame is inclined by the inflow through the vertical vent. Hence, to determine the proper horizontal vent location for the high smoke ventilation performance, the inflow through the vertical vent and its effect on flame behavior should be considered.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.151-161
• /
• 2014

In this study, an experimental investigation has been made of the applicability of outer-layer vertical blades to real ship model. After first devised by Hutchins and Choi (2003), the outer-layer vertical blades demonstrated its effectiveness in reducing total drag of flat plate (Park et al., 2011) with maximum drag reduction of 9.6%. With a view to assessing the effect in the flow around a ship, the arrays of outer-layer vertical blades have been installed onto the side bottom and flat bottom of a 300k KVLCC model. A series of towing tank test has been carried out to investigate resistance (CTM) reduction efficiency and improvement of stern wake distribution with varying geometric parameters of the blades array. The installation of vertical blades led to the CTM reduction of 2.15~2.76% near the service speed. The nominal wake fraction was affected marginally by the blades array and the axial velocity distribution tended to be more uniform by the blades array.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.29-36
• /
• 2021

The allowable strength based on experiments and the design allowable strength calculated using the design criteria were compared, which suggested a ratio between the allowable strengths for the reused vertical members of the system scaffolding and system support. By investigating a total of 421 certification reports for reused vertical members, the experimental allowable strengths were collected. Using design criteria such as the road bridge design and KDS 14 30 10, the design allowable strengths were calculated for various slenderness ratios. For the system scaffolding, the average ratio between the experimental and design allowable strengths was calculated to be 0.880 by assuming a normal distribution for all specimens. However, by analyzing the strength ratio according to the slenderness ratio, the lowest average strength ratio was found to be at least 0.844. Therefore, it is reasonable to assume that the allowable strength of the reused vertical members was 80-84% of the design allowable strength. In addition, assuming the allowable strength to be 85% of the design allowable strength is a possible method for reused vertical members of system supports.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.70-86
• /
• 1996

The purpose of this study was to analyze the stress distribution in mandibular second premolars restored with different post and core techniques. Sixteen two-dimensional finite element model of mandibular second premolars restored with post and core and complete crown were developed according to the diameter, length, and material of post and core. Vertical force, 10N in magnitude, was applied first to the central fossa and then $45^{\circ}$ oblique force of same magnitude was applied to the buccal contact surface of buccal cusp. The obtained results were as follows : 1. Stress distribution within the dentin 1) Regardless of the material of the post and core and the diameter and length of the post, the pattern of stress distribution within the dentin was similar. 2) Maximum dentinal stress was observed on the lingual root surface of alveolar crest level with oblique loading and on lingual side of root dentin at the crown margin on vertical loading. 3) Cast post and cores produced the lowest dentinal stress concentrations and the highest stress concentration was observed in composite resin post and cores. 2. Stress distribution within the post and core 1) Within the amalgam and composite resin post and core, the patterns and maximum values of stress were similar. Maximum stress located at the central fossa of core portion on vertical loading and at the lingual junction of post and core with oblique loading. 2) Among the all post and cores, the cast post and core registered the highest stress concentration and maximum stress value within the post. Maximum stress located at the post apex on vertical loading and at lingual half of the post surface with oblique loading. 3) In case of Para-post and amalgam core, maximum stress located at the central fossa of core portion and lingual tip of the post head on vertical loading. With oblique loading, maximum stress located at the lingual half of the post surface.

• Journal of Forest and Environmental Science
• /
• v.32 no.3
• /
• pp.270-279
• /
• 2016

This study explained vertical distributions and growth environments for woody vegetation. It had been degenerated by long-term volcanic activity of Sakurajima; vegetation and thicknesses of tephra layers and forest soils were investigated at 5 sites (250-700 m in altitude) with different altitudes localized at the northwestern-northern flanks of Sakurajima in Kagoshima Prefecture. The results in 2015 were compared with the vertical distribution of woody vegetation in 1963, when the volcanic activity of Sakurajima was relatively moderate. Thus, we investigated temporal changes in the vertical distribution of woody vegetation owing to volcanic activity over about 50 years (1963-2015). We indicated altitude decreased, the number of woody vegetation, number of species, sum of cross-sectional area of tree diameter at breast height, Fisher-Williams's diversity index ${\alpha}$, and forest soil thickness increased. However, these values were found to be degenerated when compared to climax forest values, and succession was incomplete. It seems that because the woody vegetation of the flank was affected by volcanic activity for a long time, exposing them to severe growth environments, areas with lower altitudes became distant from the craters of Sakurajima, thereby weakening the effect of volcanic activity in these areas at lower altitudes. a at the same altitudes over about 50 years (1963-2015) decreased by about 31-72%, and the sum of the cross-sectional area in tree diameter at breast heights decreased by about 14-62%. Thus, comparative growth environments for woody vegetation in 2015 were more severe than that of 1963, with respect to tephra layer thickness. In addition, for vegetation succession in the flank of Sakurajima, vegetation restoration should be promoted through the introduction of artificial woody plants covered by symbiotic microorganisms or organic materials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.2
• /
• pp.221-227
• /
• 2023

The vertical distribution of snow crab Chionoecetes spp. larvae in the East Sea were investigated in April 2021 using the Multiple Opening/Closing Net and Environmental Sensing System (MOCNESS). The water temperature ranged from 0.86 to 17.2℃, and salinity from 34.0 to 34.7 psu. Zoea I and II occurred range from 29 to 1,982 inds.10³ m^-3 at 10 stations, and range from 4 to 11 inds.10³ m^-3 at 3 stations, separately. Therefore, Zoea I occurred in wider area and higher density than Zoea II at all stations. In the vertical distribution of larvae, all zoeal stages were mainly distributed in the 30-40 m strata, and the larvae showed nocturnal vertical migration similar to that of most zooplankton. Zoea I appeared in the range from 13.7 to 15.8℃ and occurred at the highest density of 1982 inds.10³ m^-3 at 14℃. And Zoea II appeared range from 13.4 to 14.5℃ and occurred in the highest density of 11 inds.10³ m^-3 at 13.4℃. In conclusion, the early larval stage (zoea I) occurred at a higher range of sea surface temperature than later larval stage (zoea II).

• The Korean Journal of Ecology
• /
• v.8 no.2
• /
• pp.89-98
• /
• 1985

Correlations between horizontal distributions of bamboos (Bambusaceae) in the Korean peninsula and environmental factors were studied using taxanomic and geographical literatures, both old and current. The vertical distributions of bamboos on Mt. Chiri were also studied, and environmental factors limiting horizontal and vertical distributions were compared. There are 18 species of bamboos (belonging to 5 genera) distributed in the Korean peninsula. The distributional range of each genus were distinct, although overlapped. Northern limit of bamboos of any species was marked by the line connecting Paikryung Island (124。40'E, 38。00'N), Mt. Changsoo, Mt. Myungji, Mt. Myohyung and Myungchum (129。40'E, 41。10'N). The optimum range of bamboos was concluded to be restricted to several southern province, with annual precipitation over 1,200 mm. The limiting factors on the distribution were inferred to be low temperature and duration of it. Mean daily minimum temperature of January and the number of days with daily mean temperatures below zero during January showed close associations with the distributional range, and an environmental factors favouring the distributrion of bamboos appeared to be vicinity of warm sea current, deep and extended snow acculation and southern exposure. The vertical distribution of bamboos on Mt. Chiri was limited by low temperature, unfavorable topographic and edaphic conditions caused by steep slope. Difference in the vertical limits between SE and NW slopes are caused by the differences in temperature and precipitation between the slopes. Bamboos were more abundant in valleys than on the ridge, apparently because the deeper snow in the valleys protected the plants from low temperature, heavy winter winds and desiccation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.2
• /
• pp.146-153
• /
• 2022

The vertical distribution and abundance of icthyoplankton in the southern waters of Jeju Island during June 2020 were investigated. Fish eggs and larvae were identified using the mitochondrial DNA cytochrome c oxidase subunit I (mtDNA COI) and the 16S rRNA gene. During this period, fish eggs of 23 taxa belonging to 21 families and larvae of 27 taxa belonging to 25 families were collected. Fish eggs were located mostly from the surface to 30 m depth of the water column. Larvae were located from the surface to 80 m depth of the water column. Vertical distributions of fish eggs and larvae were influenced by oceanography conditions such as temperature, salinity, and thermocline depth. No discernible difference in mean thermocline depth was observed between day and night.