• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.185-195
• /
• 2002

Purpose This article describes the historic and clinical aspects of the determination of the vertical dimension of occlusion and the synoptic procedure of the determination of the vertical dimension of occlusion in complete denture. The determining procedure of the susceptible vertical dimension of occlusion is one of the most important steps in construction of complete denture and prosthodontic treatment. It is considered essential for the improvement and the recovery of facial esthetics and stomatognathic functions. Results Several methods have been suggested for measurement of the vertical dimension of occlusion in the construction of complete denture and the prosthodontic rehabilitation. These range from pre-extraction records to the use of physiologic rest position, swallowing, phonetics, esthetics and facial proportion, etc. But, there is no universally accepted or completely accurate method. There seems to be no significant advantages of one technique other than those of cost, time and equipment requirements, and seems to be in controversial in determining the vertical dimension. Conclusion The vertical dimension of occlusion should be determined and reinspected carefully by dentist for a successful prosthesis with several methods. The more investigations are necessary for more objective and scientific techniques in determining the vertical dimension of occlusion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.301-312
• /
• 2022

In an extensive oral rehabilitation, determining a proper occlusal vertical dimension is a critical step and the starting point for successful treatment. Since changing the occlusal vertical dimension could be time-consuming, financially challenging, and physically demanding for both clinicians and patients, multi-faceted analysis and careful consideration are essential in the diagnosis and further treatment process. The purpose of this narrative review is to discuss the occlusal vertical dimension and its current issues, and to summarize previous methods of evaluating occlusal vertical dimension to propose clinical guidance for determining a viable occlusal vertical dimension for full-mouth rehabilitation.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.106-110
• /
• 2010

The severe wear of anterior teeth facilitates the loss of anterior guidance, which protects the posterior teeth from wear during excursive movement. The collapse of posterior teeth also results in the loss of normal occlusal plane and the reduction of the vertical dimension. This case report describes 77-year-old female, who had the loss of anterior guidance, the severe wear of dentition, and the reduction of the vertical dimension. Occlusal overlay splint was used after the decision of increasing vertical dimension by anatomical landmark, facial and physiologic measurement. Once the compatibility of the new vertical dimension had been confirmed, interim fixed restoration and the permanent reconstruction was initiated. This case reports that a satisfactory clinical result was achieved by restoring the vertical dimension with an improvement in esthetics and function.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.315-323
• /
• 2014

Excessive teeth abrasion causes pathologic changes of oral environment and masticatory system due to decrease in occlusal vertical dimension. When establishing new occlusal plane and recovering vertical dimension, accurate diagnosis and analysis are essential. In this case, after appropriate centric relation in elevated vertical dimension was taken using Gothic arch tracer, full mouth rehabilitation was performed. A 70-year-old male patient had the chief complaint that he could not eat due to teeth wear. He showed generalized teeth wear and decreased vertical dimension. Elevation of vertical dimension was planned by model analysis. According to increased vertical dimension, centric relation was recorded using Gothic arch tracer and temporary prostheses were applied. Appropriate occlusion was established by temporary prostheses for 4 months. Final prostheses were fabricated using vertical dimension adapted by temporary prostheses. Through this procedure, satisfactory outcomes were achieved both in functional and esthetic aspects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.431-441
• /
• 2021

Full-mouth rehabilitation with increasing vertical dimension can be used for patients with severely worn teeth. In severely worn teeth also, the alveolar process can be elongated to compensate for the reduced vertical dimension, and the patient's vertical dimension of occlusion can be kept constant. However, full-mouth rehabilitation with increasing vertical dimension must be carefully chosen, because the vertical dimension can be reduced by tooth wear. It is important to establish a treatment plan with the systematic diagnosis of the change in the vertical dimension and gain space for the prosthesis. It is necessary to change the vertical dimension to secure the restoration space and select the minimum vertical dimension elevation for the esthetic and functional goal. In this case report, the patient complained of difficulty during chewing due to a worn dentition and wanted esthetic improvement of the short mandibular anterior teeth. After systematic evaluation and diagnosis, we performed full-mouth rehabilitation with minimum vertical dimension elevation to obtain the space for restoration. This resulted in a stable and harmonious occlusion, and the functional and esthetic problems of the patient were solved after treatment. The patient was satisfied with the results of the treatment and maintained stable occlusion during the follow-up period.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.231-244
• /
• 2001

This study was conducted to observe the effect on appendage muscle strength according to increase in occlusal vertical dimension. For this study, ten males with a mean age of 21 were selected. The subjects had a complete or almost complete set of natural teeth and reported no subjected symptoms of pain or dysfunction in the masticatory system. The tested occlusal splints were made at the position of increased occlusal vertical dimension of 2mm, 3.5mm, and 5mm from the ICP. Before and after wearing occlusal splints, the appendage muscle strength were tested by CybexII Dynamometer in each subject. The results were as follows : 1. When occlusal vertical dimension was increased, most of mean muscular strength values were increased except for those of supination and pronation of forearm at the position of 5mm increased occlusal vertical dimension. 2. The statistical analyses demonstrated that the increased occlusal vertical dimension position to be significantly stronger than intercuspal position for the muscle strength of the flexion and extension of hip, supination of forearm, external and internal rotation of knee, dorsiflexion and plantarflexion of ankle (p<0.05). 3. At the position of 3.5mm increased vertical dimension displayed the highest mean muscluar strength value than other positions. 4. Statistically demonstrated values, except for supination of forearm, internal rotation of shoulder, were related to lower appendage. Therefore splint was more effective on lower appendage than upper appendage to make muscle strength increased. 5. The mean increased rate of muscular strength tested on knee(57%), ankle(42%), and wrist(20%) were higher than hip(31%), elbow(14%), and shoulder(17%).

• The Journal of the Korean dental association
• /
• v.54 no.6
• /
• pp.438-446
• /
• 2016

Severe tooth wear may cause the pathologic change of the TMJ and masticatory muscles, unesthetic facial appearance, pathogenic pulp and occlusal disharmony. Treating patients with severely worn dentition often requires full mouth rehabilitation with increasing vertical dimension. Proper diagnosis and treatment planning are important for esthetic and functional definitive restorations and the long term stability of the neuromuscular system and the TMJ. In this case, 66 year-old female presented with generalized worn dentition. Based on assessment, pathologic destruction of teeth structure on entire dentition was caused by masticatory force and diet habit without loss of vertical dimension. Subsequently, 3 mm increase of vertical dimension that based on incisor for tooth restoration and esthetic improvement was determined. After 8 weeks stabilization period with temporary fixed prostheses, definitive prostheses were fabricated. After 6 months follow up period, satisfactory outcomes were attained both functional and esthetic aspects through this procedure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.1
• /
• pp.43-54
• /
• 1992

The purpose of this study was to obtain the guides of establishing vertical dimension by analyzing the facial and oral landmarks of Korean adults. The following conclusions were obtained from this study. 1. The ratio of bizygomatic width to dental arch width was 3.26 : 1 in male and 3.21 : 1 in female, and the ratio of vertical dimension to dental arch length was 2.49 : 1 in male and 2.39 : 1 in female. 2. It was obtained by analysis of multiple regression that the corelative formula, vertical dimension$=23.37+0.24{\times}bizygomatic$ $width+0.29{\times}dental$ arch length. 3. There was no statistically significant difference between the results of vertical dimension acquired by means of Hayakawa's prediction($68.04{\pm}3.16mm$ in male, $64.38{\pm}3.00mm$ in female) and that of vertical dimension by this study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.198-203
• /
• 2012

Excessive occlusal wear results in unacceptable damage to the occluding surfaces, and can cause pulpal injury, occlusal disharmony, impaired function, and aesthetic deformity. Patients with severely worn dentition need to be classified as several categories relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. When treating patients classified as those who have excessive wear without loss of occlusal vertical dimension but with limited space, we could consider treating them at an increased vertical dimension of occlusion. Treatments at an increased vertical dimension of occlusion may provide stability, given that the amount of its increase was minimal, and a perfected occlusion was achieved after enough stabilization period. A 50-year-old male visited the department of Prosthodontics in Yonsei University Dental Hospital with the chief complaint of worn teeth on lower anterior area. Reconstruction at an increased vertical dimension of occlusion was planned. After the compatibility of the new vertical dimension of occlusion had been confirmed under interim fixed restorations, definitive fixed restorations composed of full-contour monolithic zirconia prostheses were placed. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition at an increased vertical dimension of occlusion with an improvement in esthetics and function.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.211-220
• /
• 1997

This article describes verticsal dimension in its histologic and clinical aspect. Determination of correct vertical dimension of occlusion is one of the most important steps in prosthodontic rehabilitation. It is considered essential for improvement of facial esthetics and stomatognatic functions. Many techniques have been sued for measurement of the vertical dimension in dentulous and edentulous patients : pre-extraction record, physiologic rest position, swallowing, phonetics, esthetics, etc. But, there is no universally accepted or completely accurate method. Though a great deal of energy has been spent trying to find the exact position of the mandible, there is an controversial aspect of vetical dimension.