• 전자공학회논문지A
• /
• 제30A권6호
• /
• pp.38-48
• /
• 1993

A recessed n-p Juction diode with the self-aligned sturcture is proposed and fabricated by using the polysilicon as an n$^{+}$ diffusion source. The diode structure can be applicable to the emitter-base formation of high performance bipolar divice and the n$^{+}$ polysilicone mitter has an important effect on the device characteristics. The considered parameters for the polysilicon formation are the deposition condition. As$^{+}$ dose for the doping of the polysilicon and the annealing condition using RTP system. The vertical depth profiles of the fabricated diode are obtained by SIMS and the electrical characteristics are analyzed in terms of the ideality factor of diode (n), contact resistance and reverse leakage current. In addition, n$^{+}$-p junction diodes are formed by using the amorphous silicon (of combination of amorphous and polysiliocn) instead of polysilicon and their characteristics are compared with those of the standard sample. The As$^{+}$ dose for the formation of good junction is about 1~2${\times}10^{16}cm^{2}$ at given RTA conditions (1100.deg. C, 10sec).

• Structural Engineering and Mechanics
• /
• 제78권4호
• /
• pp.425-437
• /
• 2021

Under foundation shock mats have been used in the current practice in order to reduce/damp vibrations received by buildings through the surrounding environment. Although some investigations have been made on under foundation shock mats performance, their effectiveness in the reduction of railway induced-vibrations has not been fully studied, particularly with the consideration of underneath soil media. In this regard, this research is aimed at investigating performance of shock mat used beneath building foundation for reduction of railway induced-vibrations, taking into account soil-structure interaction. For this purpose, a 2D finite/infinite element model of a building and its surrounding soil media was developed. It includes an elastic soil media, a railway embankment, a shock mat, and the building. The model results were validated using an analytical solution reported in the literature. The performance of shock mats was examined by an extensive parametric analysis on the soil type, bedding modulus of shock mat and dominant excitation frequency. The results obtained indicated that although the shock mat can substantially reduce the building vibrations, its performance is significantly influenced by its underneath soil media. The softer the soil, the lower the shock mat efficiency. Also, as the train excitation frequency increases, a better performance of shock-mats is observed. A simplified model/method was developed for prediction of shock mat effectiveness in reduction of railway-induced vibrations, making use of the results obtained.

• Ocean and Polar Research
• /
• 제30권3호
• /
• pp.361-372
• /
• 2008

A satellite tracked drifter experiment was conducted to observe thermal structure and surface circulation in the northeastern East China Sea. For this experiment, four ADOS buoys, assembled with surface float and thermister chain, were deployed on August 2007 in southern Jeju-do, where the Kuroshio Branch Current is separated from the main stream. Thermal structure in the upper layer of the northeastern East China Sea was successfully observed during the following $1{\sim}3$ months. Strong thermo-haline front in a northeast-southwest direction was observed. In the frontal zone, warm and saline Kuroshio origin water intermixes with fresher coastal water and flows toward the Korean Strait. Typhoon Nari, which passed over the East China Sea 20 days after commencement of study, caused distinct signals in the thermal structure and trajectory of buoys. During the typhoon, surface temperature abruptly dropped to about $4^{\circ}C$, while the thermocline formed at $30{\sim}50$ m depth vanished due to strong vertical mixing. Internal inertial oscillation occurred several days after the typhoon. The fortuitous occurrence of typhoon Nari showed that ADOS buoys can provide useful and accurate air-sea interaction data during typhoons.

• 자원환경지질
• /
• 제14권3호
• /
• pp.111-122
• /
• 1981

This study is a model analysis for an effective application of the geophysical prospecting to the investigation of geological structures or useful resources, and the purpose of it is to research a property of the electrical resistivity prospecting, especially by using a Three-Point electrode array method. In using the Three-Point electrode array method, it is theoretically assumed to choose the infinite for a distance between the two current electrodes, however it is impossible in applying to the practical field prospecting. Therefore this study was conducted for determination and presentation of a minimum appropriate distance between the two current electrodes by making a study on prospecting effect in the variation of distance between both the electrodes. In case that the ratios of the distance between the two current electrodes to that between the two potential electrodes are respectively chosen for 40, 400, 5,000, the experimental data of this study showed that the minimum appropriate distance between the two current electrodes is forty times as much as that between two potential electrodes. In order to make clear a problem about prospecting depth which is essential to the data processing, it had been chosen equally to the distance between two potential electrodes. As a result of it, it was shown that the anomaly is appeared along the position of an assumed ore body. Consequently it was found out that the prospecting depth of the Three-Point electrode array method is the same as the distance between the two potential electrodes. From the model experiment on the sheeting ore body(or linear structure) of horizontal, dipping of $30^{\circ}$, $60^{\circ}$ and vertical on the basis of above experimental condition, it was found out that the position and dip of assumed ore body could be inferred from the aspects of the equiresistivity curve. In consequence of performing out the simultaneous Normal and Reversal electrode movement, it was shown that the electrode movement of the Reversal forms the anomaly more clearly than that of Normal when the sheeting ore body is situated obliquely, therefore it could be ascertained that the electrode movement have to be performed simultaneously in the manner of Normal and Reversal. It was also exhibited that the aspect of the equiresistivity curve forms symmetrically when an assumed ore body (or linear structure) is situated horizontally or vertically, that is, symmetrically, and moreover that the aspect of the equiresistivity curve forms unsymmetrically when an assumed ore body (or linear structure) is situated obliquely. On the basis of these experimental analysis it is thought that it can be inferred from the aspect of equiresistivity curve whether an assumed ore body is obliquely situated or not.

• 한국전통조경학회지
• /
• 제29권2호
• /
• pp.108-117
• /
• 2011

현재 현상변경 기준안 작성 시 일률적인 규제방식으로 영향검토구역 내의 문화재 이격거리 확보에 국한하여 높이(층수)규제만을 제한적으로 적용하고 있는데, 이는 문화재 왜소화 현상과 주변 경관에 대한 부정적인 영향을 미치고 있어 현상변경 허용기준 안 작성 시 발생될 수 있는 객관성 결여에 대한 보완책이 시급한 상황이다. 본 연구는 대상 문화재 및 주변 환경을 고려한 종합적인 가시율 전산모의분석을 통해 객관적이고 합리적인 현상변경 규제방안 의사결정을 위한 분석 방법을 제공하고자 한다. 이를 위해 천안시에 소재한 문화재 중 건축물 또는 인공구조물 밀집지역으로 현상변경 허가 시 문화재 왜소화 현상이 예상되는 대상지, 자연 지형 지물의 영향이 건축물 또는 인공구조물에 비해 상대적으로 적은 대상지, 영향검토구역 내에 현상변경 기준이 확립되지 않아 새로운 제도의 도입이 가능한 대상지의 조건에 충족하는 천흥사지 당간지주와 직산현관아를 선정하여 다중관찰자 시점을 중심으로 문화재와 주변 경관에 대한 포괄적인 조망권 설정을 위해 정량적인 가시율 분석을 진행하였다.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.34-43
• /
• 2024

New piezoelectric and triboelectric materials for energy harvesting are being widely researched to reduce their processing cost and complexity and to improve their energy conversion efficiency. In this study, BaTiO₃ films of various thickness were deposited on Ni foams by R.F. magnetron sputtering to study the piezoelectric and triboelectric properties of the porous spongy structure materials. Then piezoelectric nanogenerators (PENGs) were prepared with spongy structured BaTiO₃ and PDMS composite. The output performance exhibited a positive dependence on the thickness of the BaTiO₃ film, pushing load, and poling. The PENG output voltage and current were 4.4 V and 0.453 ㎂ at an applied stress of 120 N when poled with a 300 kV/cm electric field. The electrical properties of the fabricated PENG were stable even after 5,000 cycles of durability testing. The triboelectric nanogenerators (TENGs) were fabricated using spongy structured BaTiO₃ and various polymer films as dielectrics and operated in a vertical contact separation mode. The maximum peak to peak voltage and current of the composite film-based triboelectric nanogenerator were 63.2 V and 6 ㎂, respectively. This study offers new insights into the design and fabrication of high output nanogenerators using spongy structured materials.

• 한국항해항만학회지
• /
• 제28권6호
• /
• pp.565-572
• /
• 2004

전차륜느 연안역에서 큰 스케일에서의 물질수송에 대한 관점에서 보면 조류보다 더 중요한 역할을 한다. 이러한 잔차류의 주된 성분은 조석 잔차류이며, 취송류, 밀도류 등도 이 흐름을 변동시키는 중요한 인자들이다. 이러한 연안역의 흐름의 특성을 규명하기 위해서는 3차원 유동모델의 적용이 필수적이다. 본 연구는 하천으로부터 담수유입에 의한 연안수역의 성층화 구조를 다루는데 초점을 두었으며, 이를 위해 3차원 밀도류모델을 적용하여 울산만의 유동을 재현하고, 담수유입에 의한 성층화 구조를 규명하였다. 그 결과 울산만과 같이 담수유입이 존재하는 반폐쇄 하구에서는 표층에서는 만외로 유출하고, 저층에서는 만내로 유입하는 흐름이 발생하였다. 또한 만내방향으로의 바람이 존재하는 경우에는 표층에서는 만내로 유입하는 흐름이, 저층에서는 이에 대한 보상류로 만외로 유출하는 흐름이 발생하는 것을 알 수 있었다. 이러한 해수유동결과는 해양목장 조성을 위한 인공어초투하, 연안표사 제어를 위한 잠제건설, 해저산맥 조성 등으로 인한 연직방향으로의 용승현상에 대한 규명이나 심층수 활용을 위한 기초연구에 적용이 가능할 것으로 사료된다.

• 한국전자파학회논문지
• /
• 제20권3호
• /
• pp.230-239
• /
• 2009

본 논문에서는 FM 라디오 수신을 위한 RV 차량용 글래스 안테나를 개발하였다. 형상이 간단하면서도 주어진 유리 면적을 효율적으로 이용하여 광대역 정합에 유리하고 높은 수직 편파 이득을 보이는 다중 루프 구조를 사용하였다. 또한, 상용 RV 차량에 장착 시 시야 확보 비율을 높이기 위해서 선로에 유기되는 전류 분포를 기반으로 선로 두께를 조절하여 안테나의 투명도를 향상시켰다. 제안된 안테나는 상용 RV 차량 쿼터 유리에 인쇄하였으며, 반사 손실과 이득 등의 안테나 성능을 반무반사실에서 측정하였다. 제안된 글래스 안테나는 FM 라디오 주파수 대역(80$\sim$110 MHz)에서 안테나 전방향(bore-sight direction: $\theta=90^{\circ}$, $\phi=270^{\circ}$) 평균 이득이 -9.67 dBi로 상용 모노폴 글래스 안테나의 평균 이득 -12.49 dBi와 천장 부착용 마이크로 안테나의 평균 복사 이득 -19.24 dBi 보다 높은 이득을 보였다.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.550-554
• /
• 2013

As continued scaling becomes increasingly difficult, 3D integration has emerged as a viable solution to achieve higher bandwidths and good power efficiency. 3D integration can be defined as a technology involving the stacking of multiple processed wafers containing integrated circuits on top of each other with vertical interconnects between the wafers. This type of 3D structure can improve performance levels, enable the integration of devices with incompatible process flows, and reduce form factors. Through silicon vias (TSVs), which directly connect stacked structures die-to-die, are an enabling technology for future 3D integrated systems. TSVs filled with copper using an electro-plating method are investigated in this study. DC and pulses are used as a current source for the electro-plating process as a means of via filling. A TiN barrier and Ru seed layers are deposited by plasma-enhanced atomic layer deposition (PEALD) with thicknesses of 10 and 30 nm, respectively. All samples electroplated by the DC current showed defects, even with additives. However, the samples electroplated by the pulse current showed defect-free super-filled via structures. The optimized condition for defect-free bottom-up super-filling was established by adjusting the additive concentrations in the basic plating solution of copper sulfate. The optimized concentrations of JGB and SPS were found to be 10 and 20 ppm, respectively.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권4호
• /
• pp.227-234
• /
• 2009

강에서 유출된 담수가 연안지역에 영향을 미치는 영역을 결정하는 요인 중 하나인 담수풍선의 특성을 비정규격자계를 사용하는 유한체적모델(FVCOM)을 이용하여 연구하였다. 강에서 바다로 유출된 담수는 하류 쪽(강에서 바다를 보면서 오른쪽)으로 이동하는 연안경계류와 강 하구에서 반시계방향으로 회전하며 시간이 지남에 따라 커지는 와류형태의 담수풍선(bulge)을 만든다. 이 담수풍선의 중심에서 수직운동이 유도되어 담수가 해저면 까지 이동한다. 조석을 고려하면 담수풍선이 사라지고, 연안경계류의 폭이 넓어진다. 간단한 염분비교방법을 이용하여 조석에 의한 성층 및 혼합의 변화를 비교하여 조석이 연직혼합을 강화시킴을 정량적으로 평가하였다. 담수가 방출되기 시작한 초기에는 조석에 의한 왕복운동에 의해 조석이 고려된 경우에 수평혼합이 더 크게 나타나나, 일정시간이 지나면 수직혼합에 의해 하구역의 염분이 낮아져 있어, 강 하구에서 담수의 왕복운동이 전체적인 수평 확산계수에 미치는 영향이 작아진다. 조석이 없는 경우 연직혼합 없이 주로 표층에서만 관성불안정에 의해 수평 확산/혼합이 이루어져 수평 확산계수가 시간이 지남에 따라 계속 증가한다.