• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.113-120
• /
• 2007

Chemical vapor deposition (CVD) is one of the various synthesis methods that have been employed for carbon nanotube (CNT) growth. In particular, Ren et al reported that large areas of vertically aligned multi-wall carbon nanotubes could be grown using a direct current (dc) PECVD system. The synthesis of CNT requires a metal catalyst layer, etchant gas, and a carbon source. In this work, the substrates consists of Si wafers with Ni-deposited film. Ammonia $NH_3$) and acetylene ($C_2H_2$) were used as the etchant gases and carbon source, respectively. Pretreated conditions had an influence on vertical growth and density of CNTs. And patterned growth of CNTs could be achieved by lithographical defining the Ni catalyst prior to growth. The length of single CNT was increased as niclel dot size increased, but the growth rate was reduced when nickel dot size was more than 200 nm due to the synthesis of several CNTs on single Ni dot. The morphology of the carbon nanotubes by TEM showed that vertical CNTs were multi-wall and tip-type growth mode structure in which a Ni cap was at the end of the CNT.

• Ocean and Polar Research
• /
• v.30 no.1
• /
• pp.33-46
• /
• 2008

In order to investigate seasonal variations of the physical environments in the region of Jinhae Bay-Nakdongpo, we carried out hydrographic surveys from November 2000 to November 2001. Horizontal and vertical distribution of salinity and temperature shows large seasonal variations. Water column is well mixed in winter and stratified in summer. Low-salinity water is distributed in the form of patches because of the drainage control at the Nakdong River. Seasonal variations in the sea near Gadeok-Sudo are affected by topography, river discharge and tidal current. Currents have been measured using a bottom mounted ADCP and DCM12 between November 2000 and August 2001 in the Gadeok-Sudo. The current in the Gadeok-Sudo shows a distinct two-layer structure with reversed current. Low-pass filtered time series of wind, sea elevation and current are coherent for the period of 1-2 days and are attributed to Ekman-like dynamics. Spatial and temporal circulation pattern shows a slight different. The subtidal current in Jinhae Bay goes northward, however is reversed in the Gadeok-Sudo mouth.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.70-82
• /
• 1995

A multi-layer simulation program is developed to estimate the ocean current considering sea bottom geometry. The so-called $\sigma$ coordinate system is introduced in vertical direction to describe sea bottom topography more accurately and effectively. Leapfrog scheme combined with Euler backward scheme is used to reduce computation error which may be possibly accumulated in time evolution by Leapfrog scheme alone. In this paper, very simple examples of rectangular basins with various bottom geometries were taken and the effect of sea bottom geometry on vertical structure of the ocean tidal current and its direction were investigated. Through comparisons between the present three dimensional calculation in which bottom topography is directly taken into consideration and the two dimensional calculation in which depth average concept is employed, it was found that magnitude of surface current and its direction could be largely affected by the sea bottom topography, particularly in shallow region with complex bottom shape.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.4
• /
• pp.215-228
• /
• 1991

In the East Sea of Korea the vertical structure functions of the temperature field were evaluated and the characteristic thermal zone was classified by the use of the empirical orthogonal function(EOF) method. The East Sea of Korea within the hydrographic lines of 10-107 of the Fisheries Research and Development Agency of Korea(FRDA) can be divided into three thermal regions by the characteristics of the vertical temperature variability. They are the North Korean Cold Current(NKCC) region near the coast which extends parallel to the north-south direction, the Warm-Core(WC) region which dominates almost all the hydrographic stations of the Line 104 of the FRDA and occupies a few stations of the Line-103 and -105 with its axis at the Line 104, and the East Korea Warm Current(EKWC) region which is bisected into the northern and the southern part by the WC region, respectively. Considering the two most important modes, $85.20-98.20\%$ of the total variance of temperature variation are explained in the NKCC region, $85.20-92.90\%$ in the EKWC region, and$85.50-91.70\%$ in the WC region. The first mode has its peak value at the surface with the annual cycle of variation. The spatial pattern of the first mode portrays a coherent vertical variation in the EKWC region and a clear anti-correlation both in the NKCC region and in the WC region where the zero-crossing depths are loom and 200m, respectively. The second mode of the NKCC region is particularly noticeable, haying its peak at loom with coherent vertical variation. To study the time dependency of the vertical structure functions, the extended EOF(EEOF) method was used. The persistence of the first mode is less than 4 months in the study area. The annual variation of the first mode in the NKCC region is different from those in the WC region and in the EKWC region.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.1
• /
• pp.61-73
• /
• 2016

Water mass distribution and currents were investigated off the east coast of Korea near the Hupo Bank using the CTD and ADCP data from June to August 2010. The typical water masses were: (1) Tsushima Surface Water (TSW) from the East Korean Warm Current (EKWC) in the surface layer, (2) a shallow thermocline at 20-30 m depth, (3) Tsushima Middle Water (TMW) of high salinity (>34.2) below the pycnocline, (4) North Korean Cold Water (NKCW) of low salinity (<34.05) and low temperature (<4°C) in the lower layer. In June, a double eddy was observed in which a cold filament intruded cyclonically from the south around a pre-existing cold-core eddy. A burst of strong southward current was recorded in mid-August due to a warm filament from the meandering EKWC. Current in the N-S direction was predominant due to topographic effects, and the direction of the northward EKWC was frequently reversed in its direction due to the eddy-filament activity, whereas the influence of the wind was not noticeable. The vertical structure of the current was of a two-layer system, with the northward EKWC in the upper layer and weak southward flows corresponding to the North Korean Cold Current (NKCC) in the deeper layer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.24-30
• /
• 2007

Latching optical switches and optical logic gates with AND or OR, and the INVERT functionality are demonstrated, for the first time, by the monolithic integration of a differential typed vertical cavity laser with depleted optical thyristor (VCL-DOT) structure with a low threshold current of 0.65 mA, a high slope efficiency of 0.38 mW/mA, and high sensitivity to input optical light. Many kinds of logic functions (AND, OR, NAND, NOR, and INVERT) are experimentally demonstrated using a differential switching operation scheme changing the intensity of a reference input beam without any changes of electrical circuits.

• Earthquakes and Structures
• /
• v.12 no.1
• /
• pp.135-144
• /
• 2017

Near-fault ground motions are characterized by high values of the ratio between the peak of vertical and horizontal ground accelerations, which can significantly affect the nonlinear response of a base-isolated structure. To check the effectiveness of different base-isolation systems for retrofitting a r.c. framed structure located in a near-fault area, a numerical investigation is carried out analyzing the nonlinear dynamic response of the fixed-base and isolated structures. For this purpose, a six-storey r.c. framed building is supposed to be retrofitted by insertion of an isolation system at the base for attaining performance levels imposed by current Italian code in a high-risk seismic zone. In particular, elastomeric (e.g., high-damping-laminated-rubber bearings, HDLRBs) and friction (e.g., steel-PTFE sliding bearings, SBs, or friction pendulum bearings, FPBs) isolators are considered, with reference to three cases of base isolation: HDLRBs acting alone (i.e., EBI structures); in-parallel combination of HDLRBs and SBs (i.e., EFBI structures); FPBs acting alone (i.e., FPBI structures). Different values of the stiffness ratio, defined as the ratio between the vertical and horizontal stiffnesses of the HDLRBs, sliding ratio, defined as the global sliding force divided by the maximum sliding force of the SBs, and in-plan distribution of friction coefficient for the FPs are investigated. The EBI, EFBI and FPBI base-isolation systems are designed assuming the same values of the fundamental vibration period and equivalent viscous damping ratio. The nonlinear dynamic analysis is carried out with reference to near-fault earthquakes, selected and scaled on the design hypotheses adopted for the test structures.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.78-88
• /
• 1992

To improve the characteristics of sub$\mu$m short channel MOSFET device, a new device having the convex structure is proposed. This device has 3-dimensionally expandable channel length according to the vertical etched silicon height. For the purpose of comparing the DC and AC characteristics, planar device is also fabricated. Comparing the channel length, the convex device with 0.4$\mu$m silicon height is larger about 0.56$\mu$m in NMOS and 0.78$\mu$m in PMOS than planar devices. DC characteristics, such as threshold voltage, operational current, substrate current and breakdown voltage are compared together with AC characteristics using the ring oscillator inverter delay. Also process and device simulation are performed and the differences between convex and pranaldevice are also compared.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.4
• /
• pp.261-271
• /
• 2018

In this study, a hydraulic model test, to which Particle Image Velocimetry (PIV) system applied, was used to determine the hydrodynamic characteristics of the advection-diffusion of saltwater according to bottom conditions (impermeable/permeability, diameter, and inclination) and the difference of the initial salt. Considering quantitative and qualitative results from the experiment, the characteristics of the density current were discussed. As an experimental result, the advection-diffusion mechanism of salinity was examined by the shape of saltwater wedge and the flow structure of density currents with various bottom conditions. The vertical salt concentration obtained from the experiment was used as quantitative data to calculate the diffusion coefficient that was used in the numerical model of the advection-diffusion of saltwater.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1011-1015
• /
• 2005

Fully digital controlled 20-bit magnet power supplies have been developed and successfully tested for closed orbit correction of PLS(Pohang Light Source). The new digital power supply has used fiber optics for 25kHz switching of IGBT drivers, and implemented DSP, ADC, Interlock, DCCT cards in a compact 3U-sized 19" chassis. Input/Output low-pass filters suppress harmonics of 60Hz line frequency and switching frequency noise effectively. Overall performance of the power supplies have been demonstrated as +/- 2ppm short-term stability(<1 min), and +/- 10ppm long-term stability(<36 hours). All the existing 12-bit 70 power supplies for vertical correction magnets will be replaced with new digital power supplies during 2005 summer shutdown period. In this paper, we will describe the hardware structure and control method of the digital power supply and the experimental results will be shown.